OpenWrt/openwrt @ 8733456b72337e2879dfd8f7aa6f4a0d8a09dbe9

Žiadny popis

12 Vetvy

Florian Fainelli 8733456b72 fix quilt installation on all platforms		16 rokov pred
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 rokov pred
include	106a08103f change HOST_STAMP_PREPARED for toolchain builds to make sure that added/removed patches do not trigger partial toolchain rebuilds	16 rokov pred
package	241242cf74 udevtrigger: replace the non-portable tar options used to prevent a namespace conflict with a change to PKG_BUILD_DIR. fixes build on non-gnu systems	16 rokov pred
scripts	49e657f433 fix breakage introduced with [17394]	16 rokov pred
target	e326ff3fa5 remove kernel patch for now since it is incomplete and has some licensing issues	16 rokov pred
toolchain	ffa2d292fe more cygwin build fixes	16 rokov pred
tools	8733456b72 fix quilt installation on all platforms	16 rokov pred
.gitignore	13189afcc9 add logs/ to .gitignore	16 rokov pred
BSDmakefile	f30058fda2 add missing copyright header	19 rokov pred
Config.in	e2f5de7a46 add menuconfig option for selecting initramfs compression	16 rokov pred
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 rokov pred
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	16 rokov pred
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 rokov pred
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 rokov pred
rules.mk	2982f7ef79 move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages	16 rokov pred

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org