OpenWrt/openwrt @ b9da4dcb6b755568d7728d9e90feaad686b0b8c0

Fără Descriere

19408 Angajamente

Hauke Mehrtens b9da4dcb6b switch: fix some memory leaks in switch_parse_vlan()		14 ani în urmă
docs	6c387521f6 kamikaze has been released long ago	15 ani în urmă
include	a5d34b8613 autotools.mk: fix autoreconf in subdirectories, thanks field_it for spotting this	14 ani în urmă
package	b9da4dcb6b switch: fix some memory leaks in switch_parse_vlan()	14 ani în urmă
scripts	fe60046a26 ext-toolchain.sh: CONFIG_NLS -> CONFIG_BUILD_NLS	14 ani în urmă
target	eeb00634a7 add support for the Atheros AP113 reference board	14 ani în urmă
toolchain	0665e400a0 eglibc 2.14 needs our eglibc patchset as well	14 ani în urmă
tools	478d9fc97e autoconf: another relocatability fix for autom4te, substitute hardcoded prefix with $STAGING_DIR when reading autom4te.cfg	14 ani în urmă
.gitignore	98d6f2e1d9 .gitignore: Ignore Emacs editor generated files	14 ani în urmă
BSDmakefile	f30058fda2 add missing copyright header	19 ani în urmă
Config.in	d22adb1b06 if CONFIG_BUILD_NLS is selected, compile uClibc with locale support	14 ani în urmă
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 ani în urmă
Makefile	b81354d828 abort built in prereq target if there is no site config file for the current target	14 ani în urmă
README	4828e8ff23 trying to make README file a bit more helpful	14 ani în urmă
feeds.conf.default	ef40c7049a Add xorg feed to feeds.conf.default	14 ani în urmă
rules.mk	5b7668ca44 use ext-toolchain.sh to integrate external toolchains Use ext-toolchain.sh to wrap external toolchain commands, abort build if certain features such as CONFIG_SOFT_FLOAT or CONFIG_IPV6 are enabled but not supported by the toolchain.	14 ani în urmă

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org