|
|
@@ -1,2507 +0,0 @@
|
|
|
-From ded8f22945899f4e87dd6d952bbc4abce6e64b7e Mon Sep 17 00:00:00 2001
|
|
|
-From: William Zhang <[email protected]>
|
|
|
-Date: Wed, 3 Aug 2022 10:54:50 -0700
|
|
|
-Subject: [PATCH] arm64: dts: Move BCM4908 dts to bcmbca folder
|
|
|
-
|
|
|
-As part of ARCH_BCM4908 to ARCH_BCMBCA migration, move the BCM4908 dts
|
|
|
-files to bcmbca folder and use CONFIG_ARCH_BCMBCA to build all the
|
|
|
-BCM4908 board dts. Delete bcm4908 folder and its makefile as well.
|
|
|
-
|
|
|
-Signed-off-by: William Zhang <[email protected]>
|
|
|
-Link: https://lore.kernel.org/r/[email protected]
|
|
|
-Signed-off-by: Florian Fainelli <[email protected]>
|
|
|
----
|
|
|
- arch/arm64/boot/dts/broadcom/Makefile | 1 -
|
|
|
- arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 5 -----
|
|
|
- arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 4 ++++
|
|
|
- .../broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts | 0
|
|
|
- .../{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts | 0
|
|
|
- .../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi | 0
|
|
|
- .../broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts | 0
|
|
|
- .../broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts | 0
|
|
|
- .../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi | 0
|
|
|
- 9 files changed, 4 insertions(+), 6 deletions(-)
|
|
|
- delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
|
|
|
- rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts (100%)
|
|
|
- rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts (100%)
|
|
|
- rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi (100%)
|
|
|
- rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts (100%)
|
|
|
- rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts (100%)
|
|
|
- rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi (100%)
|
|
|
-
|
|
|
---- a/arch/arm64/boot/dts/broadcom/Makefile
|
|
|
-+++ b/arch/arm64/boot/dts/broadcom/Makefile
|
|
|
-@@ -6,7 +6,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rp
|
|
|
- bcm2837-rpi-3-b-plus.dtb \
|
|
|
- bcm2837-rpi-cm3-io3.dtb
|
|
|
-
|
|
|
--subdir-y += bcm4908
|
|
|
- subdir-y += bcmbca
|
|
|
- subdir-y += northstar2
|
|
|
- subdir-y += stingray
|
|
|
---- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
|
|
|
-+++ /dev/null
|
|
|
-@@ -1,5 +0,0 @@
|
|
|
--# SPDX-License-Identifier: GPL-2.0
|
|
|
--dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
|
|
|
--dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb
|
|
|
--dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
|
|
|
--dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-netgear-raxe500.dtb
|
|
|
---- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
|
|
|
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
|
|
|
-@@ -1,5 +1,9 @@
|
|
|
- # SPDX-License-Identifier: GPL-2.0
|
|
|
- dtb-$(CONFIG_ARCH_BCMBCA) += \
|
|
|
-+ bcm4906-netgear-r8000p.dtb \
|
|
|
-+ bcm4906-tplink-archer-c2300-v1.dtb \
|
|
|
-+ bcm4908-asus-gt-ac5300.dtb \
|
|
|
-+ bcm4908-netgear-raxe500.dtb \
|
|
|
- bcm4912-asus-gt-ax6000.dtb \
|
|
|
- bcm94912.dtb \
|
|
|
- bcm963158.dtb \
|
|
|
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
|
|
|
-+++ /dev/null
|
|
|
-@@ -1,157 +0,0 @@
|
|
|
--// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
--
|
|
|
--#include <dt-bindings/gpio/gpio.h>
|
|
|
--#include <dt-bindings/input/input.h>
|
|
|
--#include <dt-bindings/leds/common.h>
|
|
|
--
|
|
|
--#include "bcm4906.dtsi"
|
|
|
--
|
|
|
--/ {
|
|
|
-- compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
|
|
|
-- model = "Netgear R8000P";
|
|
|
--
|
|
|
-- memory@0 {
|
|
|
-- device_type = "memory";
|
|
|
-- reg = <0x00 0x00 0x00 0x20000000>;
|
|
|
-- };
|
|
|
--
|
|
|
-- leds {
|
|
|
-- compatible = "gpio-leds";
|
|
|
--
|
|
|
-- led-power-white {
|
|
|
-- function = LED_FUNCTION_POWER;
|
|
|
-- color = <LED_COLOR_ID_WHITE>;
|
|
|
-- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-power-amber {
|
|
|
-- function = LED_FUNCTION_POWER;
|
|
|
-- color = <LED_COLOR_ID_AMBER>;
|
|
|
-- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-wps {
|
|
|
-- function = LED_FUNCTION_WPS;
|
|
|
-- color = <LED_COLOR_ID_WHITE>;
|
|
|
-- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-2ghz {
|
|
|
-- function = "2ghz";
|
|
|
-- color = <LED_COLOR_ID_WHITE>;
|
|
|
-- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-5ghz-1 {
|
|
|
-- function = "5ghz-1";
|
|
|
-- color = <LED_COLOR_ID_WHITE>;
|
|
|
-- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-5ghz-2 {
|
|
|
-- function = "5ghz-2";
|
|
|
-- color = <LED_COLOR_ID_WHITE>;
|
|
|
-- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-usb2 {
|
|
|
-- function = "usb2";
|
|
|
-- color = <LED_COLOR_ID_WHITE>;
|
|
|
-- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-usb3 {
|
|
|
-- function = "usb3";
|
|
|
-- color = <LED_COLOR_ID_WHITE>;
|
|
|
-- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-wifi {
|
|
|
-- function = "wifi";
|
|
|
-- color = <LED_COLOR_ID_WHITE>;
|
|
|
-- gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
-- };
|
|
|
--};
|
|
|
--
|
|
|
--&enet {
|
|
|
-- nvmem-cells = <&base_mac_addr>;
|
|
|
-- nvmem-cell-names = "mac-address";
|
|
|
--};
|
|
|
--
|
|
|
--&usb_phy {
|
|
|
-- brcm,ioc = <1>;
|
|
|
-- status = "okay";
|
|
|
--};
|
|
|
--
|
|
|
--&ehci {
|
|
|
-- status = "okay";
|
|
|
--};
|
|
|
--
|
|
|
--&ohci {
|
|
|
-- status = "okay";
|
|
|
--};
|
|
|
--
|
|
|
--&xhci {
|
|
|
-- status = "okay";
|
|
|
--};
|
|
|
--
|
|
|
--&ports {
|
|
|
-- port@0 {
|
|
|
-- label = "lan4";
|
|
|
-- };
|
|
|
--
|
|
|
-- port@1 {
|
|
|
-- label = "lan3";
|
|
|
-- };
|
|
|
--
|
|
|
-- port@2 {
|
|
|
-- label = "lan2";
|
|
|
-- };
|
|
|
--
|
|
|
-- port@3 {
|
|
|
-- label = "lan1";
|
|
|
-- };
|
|
|
--
|
|
|
-- port@7 {
|
|
|
-- reg = <7>;
|
|
|
-- phy-mode = "internal";
|
|
|
-- phy-handle = <&phy12>;
|
|
|
-- label = "wan";
|
|
|
-- };
|
|
|
--};
|
|
|
--
|
|
|
--&nandcs {
|
|
|
-- nand-ecc-strength = <4>;
|
|
|
-- nand-ecc-step-size = <512>;
|
|
|
-- nand-on-flash-bbt;
|
|
|
--
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <0>;
|
|
|
--
|
|
|
-- partitions {
|
|
|
-- compatible = "fixed-partitions";
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <1>;
|
|
|
--
|
|
|
-- partition@0 {
|
|
|
-- compatible = "nvmem-cells";
|
|
|
-- label = "cferom";
|
|
|
-- reg = <0x0 0x100000>;
|
|
|
--
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <1>;
|
|
|
-- ranges = <0 0x0 0x100000>;
|
|
|
--
|
|
|
-- base_mac_addr: mac@106a0 {
|
|
|
-- reg = <0x106a0 0x6>;
|
|
|
-- };
|
|
|
-- };
|
|
|
--
|
|
|
-- partition@100000 {
|
|
|
-- compatible = "brcm,bcm4908-firmware";
|
|
|
-- label = "firmware";
|
|
|
-- reg = <0x100000 0x4400000>;
|
|
|
-- };
|
|
|
-- };
|
|
|
--};
|
|
|
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
|
|
|
-+++ /dev/null
|
|
|
-@@ -1,182 +0,0 @@
|
|
|
--// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
--
|
|
|
--#include <dt-bindings/gpio/gpio.h>
|
|
|
--#include <dt-bindings/input/input.h>
|
|
|
--#include <dt-bindings/leds/common.h>
|
|
|
--
|
|
|
--#include "bcm4906.dtsi"
|
|
|
--
|
|
|
--/ {
|
|
|
-- compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
|
|
|
-- model = "TP-Link Archer C2300 V1";
|
|
|
--
|
|
|
-- memory@0 {
|
|
|
-- device_type = "memory";
|
|
|
-- reg = <0x00 0x00 0x00 0x20000000>;
|
|
|
-- };
|
|
|
--
|
|
|
-- leds {
|
|
|
-- compatible = "gpio-leds";
|
|
|
--
|
|
|
-- led-power {
|
|
|
-- function = LED_FUNCTION_POWER;
|
|
|
-- color = <LED_COLOR_ID_BLUE>;
|
|
|
-- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-2ghz {
|
|
|
-- function = "2ghz";
|
|
|
-- color = <LED_COLOR_ID_BLUE>;
|
|
|
-- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-5ghz {
|
|
|
-- function = "5ghz";
|
|
|
-- color = <LED_COLOR_ID_BLUE>;
|
|
|
-- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-wan-amber {
|
|
|
-- function = LED_FUNCTION_WAN;
|
|
|
-- color = <LED_COLOR_ID_AMBER>;
|
|
|
-- gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-wan-blue {
|
|
|
-- function = LED_FUNCTION_WAN;
|
|
|
-- color = <LED_COLOR_ID_BLUE>;
|
|
|
-- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-lan {
|
|
|
-- function = LED_FUNCTION_LAN;
|
|
|
-- color = <LED_COLOR_ID_BLUE>;
|
|
|
-- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-wps {
|
|
|
-- function = LED_FUNCTION_WPS;
|
|
|
-- color = <LED_COLOR_ID_BLUE>;
|
|
|
-- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-usb2 {
|
|
|
-- function = "usb2";
|
|
|
-- color = <LED_COLOR_ID_BLUE>;
|
|
|
-- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-usb3 {
|
|
|
-- function = "usbd3";
|
|
|
-- color = <LED_COLOR_ID_BLUE>;
|
|
|
-- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-brightness {
|
|
|
-- function = LED_FUNCTION_BACKLIGHT;
|
|
|
-- color = <LED_COLOR_ID_WHITE>;
|
|
|
-- gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
-- };
|
|
|
--
|
|
|
-- gpio-keys-polled {
|
|
|
-- compatible = "gpio-keys-polled";
|
|
|
-- poll-interval = <100>;
|
|
|
--
|
|
|
-- key-brightness {
|
|
|
-- label = "LEDs";
|
|
|
-- linux,code = <KEY_BRIGHTNESS_ZERO>;
|
|
|
-- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- key-wps {
|
|
|
-- label = "WPS";
|
|
|
-- linux,code = <KEY_WPS_BUTTON>;
|
|
|
-- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- key-wifi {
|
|
|
-- label = "WiFi";
|
|
|
-- linux,code = <KEY_RFKILL>;
|
|
|
-- gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- key-restart {
|
|
|
-- label = "Reset";
|
|
|
-- linux,code = <KEY_RESTART>;
|
|
|
-- gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
-- };
|
|
|
--};
|
|
|
--
|
|
|
--&usb_phy {
|
|
|
-- brcm,ioc = <1>;
|
|
|
-- status = "okay";
|
|
|
--};
|
|
|
--
|
|
|
--&ehci {
|
|
|
-- status = "okay";
|
|
|
--};
|
|
|
--
|
|
|
--&ohci {
|
|
|
-- status = "okay";
|
|
|
--};
|
|
|
--
|
|
|
--&xhci {
|
|
|
-- status = "okay";
|
|
|
--};
|
|
|
--
|
|
|
--&ports {
|
|
|
-- port@0 {
|
|
|
-- label = "lan4";
|
|
|
-- };
|
|
|
--
|
|
|
-- port@1 {
|
|
|
-- label = "lan3";
|
|
|
-- };
|
|
|
--
|
|
|
-- port@2 {
|
|
|
-- label = "lan2";
|
|
|
-- };
|
|
|
--
|
|
|
-- port@3 {
|
|
|
-- label = "lan1";
|
|
|
-- };
|
|
|
--
|
|
|
-- port@7 {
|
|
|
-- reg = <7>;
|
|
|
-- phy-mode = "internal";
|
|
|
-- phy-handle = <&phy12>;
|
|
|
-- label = "wan";
|
|
|
-- };
|
|
|
--};
|
|
|
--
|
|
|
--&nandcs {
|
|
|
-- nand-ecc-strength = <4>;
|
|
|
-- nand-ecc-step-size = <512>;
|
|
|
-- nand-on-flash-bbt;
|
|
|
--
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <0>;
|
|
|
--
|
|
|
-- partitions {
|
|
|
-- compatible = "brcm,bcm4908-partitions";
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <1>;
|
|
|
--
|
|
|
-- partition@0 {
|
|
|
-- label = "cferom";
|
|
|
-- reg = <0x0 0x100000>;
|
|
|
-- };
|
|
|
--
|
|
|
-- partition@100000 {
|
|
|
-- compatible = "brcm,bcm4908-firmware";
|
|
|
-- reg = <0x100000 0x3900000>;
|
|
|
-- };
|
|
|
--
|
|
|
-- partition@5800000 {
|
|
|
-- compatible = "brcm,bcm4908-firmware";
|
|
|
-- reg = <0x3a00000 0x3900000>;
|
|
|
-- };
|
|
|
-- };
|
|
|
--};
|
|
|
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
|
|
|
-+++ /dev/null
|
|
|
-@@ -1,34 +0,0 @@
|
|
|
--// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
--
|
|
|
--#include "bcm4908.dtsi"
|
|
|
--
|
|
|
--/ {
|
|
|
-- cpus {
|
|
|
-- /delete-node/ cpu@2;
|
|
|
--
|
|
|
-- /delete-node/ cpu@3;
|
|
|
-- };
|
|
|
--
|
|
|
-- timer {
|
|
|
-- compatible = "arm,armv8-timer";
|
|
|
-- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
|
|
|
-- };
|
|
|
--
|
|
|
-- timer {
|
|
|
-- compatible = "arm,armv8-timer";
|
|
|
-- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
|
|
|
-- };
|
|
|
--
|
|
|
-- pmu {
|
|
|
-- compatible = "arm,cortex-a53-pmu";
|
|
|
-- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
-- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-- interrupt-affinity = <&cpu0>, <&cpu1>;
|
|
|
-- };
|
|
|
--};
|
|
|
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
|
|
|
-+++ /dev/null
|
|
|
-@@ -1,207 +0,0 @@
|
|
|
--// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
--
|
|
|
--#include <dt-bindings/gpio/gpio.h>
|
|
|
--#include <dt-bindings/input/input.h>
|
|
|
--#include <dt-bindings/leds/common.h>
|
|
|
--
|
|
|
--#include "bcm4908.dtsi"
|
|
|
--
|
|
|
--/ {
|
|
|
-- compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca";
|
|
|
-- model = "Asus GT-AC5300";
|
|
|
--
|
|
|
-- memory@0 {
|
|
|
-- device_type = "memory";
|
|
|
-- reg = <0x00 0x00 0x00 0x40000000>;
|
|
|
-- };
|
|
|
--
|
|
|
-- gpio-keys-polled {
|
|
|
-- compatible = "gpio-keys-polled";
|
|
|
-- poll-interval = <100>;
|
|
|
--
|
|
|
-- key-wifi {
|
|
|
-- label = "WiFi";
|
|
|
-- linux,code = <KEY_RFKILL>;
|
|
|
-- gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- key-wps {
|
|
|
-- label = "WPS";
|
|
|
-- linux,code = <KEY_WPS_BUTTON>;
|
|
|
-- gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- key-restart {
|
|
|
-- label = "Reset";
|
|
|
-- linux,code = <KEY_RESTART>;
|
|
|
-- gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
--
|
|
|
-- key-brightness {
|
|
|
-- label = "LEDs";
|
|
|
-- linux,code = <KEY_BRIGHTNESS_ZERO>;
|
|
|
-- gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
|
|
|
-- };
|
|
|
-- };
|
|
|
--};
|
|
|
--
|
|
|
--&enet {
|
|
|
-- nvmem-cells = <&base_mac_addr>;
|
|
|
-- nvmem-cell-names = "mac-address";
|
|
|
--};
|
|
|
--
|
|
|
--&usb_phy {
|
|
|
-- brcm,ioc = <1>;
|
|
|
-- status = "okay";
|
|
|
--};
|
|
|
--
|
|
|
--&ehci {
|
|
|
-- status = "okay";
|
|
|
--};
|
|
|
--
|
|
|
--&ohci {
|
|
|
-- status = "okay";
|
|
|
--};
|
|
|
--
|
|
|
--&xhci {
|
|
|
-- status = "okay";
|
|
|
--};
|
|
|
--
|
|
|
--&ports {
|
|
|
-- port@0 {
|
|
|
-- label = "lan2";
|
|
|
-- };
|
|
|
--
|
|
|
-- port@1 {
|
|
|
-- label = "lan1";
|
|
|
-- };
|
|
|
--
|
|
|
-- port@2 {
|
|
|
-- label = "lan6";
|
|
|
-- };
|
|
|
--
|
|
|
-- port@3 {
|
|
|
-- label = "lan5";
|
|
|
-- };
|
|
|
--
|
|
|
-- /* External BCM53134S switch */
|
|
|
-- port@7 {
|
|
|
-- label = "sw";
|
|
|
-- reg = <7>;
|
|
|
-- phy-mode = "rgmii";
|
|
|
--
|
|
|
-- fixed-link {
|
|
|
-- speed = <1000>;
|
|
|
-- full-duplex;
|
|
|
-- };
|
|
|
-- };
|
|
|
--};
|
|
|
--
|
|
|
--&mdio {
|
|
|
-- /* lan8 */
|
|
|
-- ethernet-phy@0 {
|
|
|
-- reg = <0>;
|
|
|
-- };
|
|
|
--
|
|
|
-- /* lan7 */
|
|
|
-- ethernet-phy@1 {
|
|
|
-- reg = <1>;
|
|
|
-- };
|
|
|
--
|
|
|
-- /* lan4 */
|
|
|
-- ethernet-phy@2 {
|
|
|
-- reg = <2>;
|
|
|
-- };
|
|
|
--
|
|
|
-- /* lan3 */
|
|
|
-- ethernet-phy@3 {
|
|
|
-- reg = <3>;
|
|
|
-- };
|
|
|
--};
|
|
|
--
|
|
|
--&leds {
|
|
|
-- led-power@11 {
|
|
|
-- reg = <0x11>;
|
|
|
-- function = LED_FUNCTION_POWER;
|
|
|
-- color = <LED_COLOR_ID_WHITE>;
|
|
|
-- default-state = "on";
|
|
|
-- active-low;
|
|
|
-- pinctrl-names = "default";
|
|
|
-- pinctrl-0 = <&pins_led_17_a>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-wan-red@12 {
|
|
|
-- reg = <0x12>;
|
|
|
-- function = LED_FUNCTION_WAN;
|
|
|
-- color = <LED_COLOR_ID_RED>;
|
|
|
-- active-low;
|
|
|
-- pinctrl-names = "default";
|
|
|
-- pinctrl-0 = <&pins_led_18_a>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-wps@14 {
|
|
|
-- reg = <0x14>;
|
|
|
-- function = LED_FUNCTION_WPS;
|
|
|
-- color = <LED_COLOR_ID_WHITE>;
|
|
|
-- active-low;
|
|
|
-- pinctrl-names = "default";
|
|
|
-- pinctrl-0 = <&pins_led_20_a>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-wan-white@15 {
|
|
|
-- reg = <0x15>;
|
|
|
-- function = LED_FUNCTION_WAN;
|
|
|
-- color = <LED_COLOR_ID_WHITE>;
|
|
|
-- active-low;
|
|
|
-- pinctrl-names = "default";
|
|
|
-- pinctrl-0 = <&pins_led_21_a>;
|
|
|
-- };
|
|
|
--
|
|
|
-- led-lan@19 {
|
|
|
-- reg = <0x19>;
|
|
|
-- function = LED_FUNCTION_LAN;
|
|
|
-- color = <LED_COLOR_ID_WHITE>;
|
|
|
-- pinctrl-names = "default";
|
|
|
-- pinctrl-0 = <&pins_led_25_a>;
|
|
|
-- };
|
|
|
--};
|
|
|
--
|
|
|
--&nandcs {
|
|
|
-- nand-ecc-strength = <4>;
|
|
|
-- nand-ecc-step-size = <512>;
|
|
|
-- nand-on-flash-bbt;
|
|
|
-- brcm,nand-has-wp;
|
|
|
--
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <0>;
|
|
|
--
|
|
|
-- partitions {
|
|
|
-- compatible = "brcm,bcm4908-partitions";
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <1>;
|
|
|
--
|
|
|
-- partition@0 {
|
|
|
-- compatible = "nvmem-cells";
|
|
|
-- label = "cferom";
|
|
|
-- reg = <0x0 0x100000>;
|
|
|
--
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <1>;
|
|
|
-- ranges = <0 0x0 0x100000>;
|
|
|
--
|
|
|
-- base_mac_addr: mac@106a0 {
|
|
|
-- reg = <0x106a0 0x6>;
|
|
|
-- };
|
|
|
-- };
|
|
|
--
|
|
|
-- partition@100000 {
|
|
|
-- compatible = "brcm,bcm4908-firmware";
|
|
|
-- reg = <0x100000 0x5700000>;
|
|
|
-- };
|
|
|
--
|
|
|
-- partition@5800000 {
|
|
|
-- compatible = "brcm,bcm4908-firmware";
|
|
|
-- reg = <0x5800000 0x5700000>;
|
|
|
-- };
|
|
|
-- };
|
|
|
--};
|
|
|
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
|
|
|
-+++ /dev/null
|
|
|
-@@ -1,50 +0,0 @@
|
|
|
--// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
--
|
|
|
--#include "bcm4908.dtsi"
|
|
|
--
|
|
|
--/ {
|
|
|
-- compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca";
|
|
|
-- model = "Netgear RAXE500";
|
|
|
--
|
|
|
-- memory@0 {
|
|
|
-- device_type = "memory";
|
|
|
-- reg = <0x00 0x00 0x00 0x40000000>;
|
|
|
-- };
|
|
|
--};
|
|
|
--
|
|
|
--&ehci {
|
|
|
-- status = "okay";
|
|
|
--};
|
|
|
--
|
|
|
--&ohci {
|
|
|
-- status = "okay";
|
|
|
--};
|
|
|
--
|
|
|
--&xhci {
|
|
|
-- status = "okay";
|
|
|
--};
|
|
|
--
|
|
|
--&ports {
|
|
|
-- port@0 {
|
|
|
-- label = "lan4";
|
|
|
-- };
|
|
|
--
|
|
|
-- port@1 {
|
|
|
-- label = "lan3";
|
|
|
-- };
|
|
|
--
|
|
|
-- port@2 {
|
|
|
-- label = "lan2";
|
|
|
-- };
|
|
|
--
|
|
|
-- port@3 {
|
|
|
-- label = "lan1";
|
|
|
-- };
|
|
|
--
|
|
|
-- port@7 {
|
|
|
-- reg = <7>;
|
|
|
-- phy-mode = "internal";
|
|
|
-- phy-handle = <&phy12>;
|
|
|
-- label = "wan";
|
|
|
-- };
|
|
|
--};
|
|
|
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
|
|
|
-+++ /dev/null
|
|
|
-@@ -1,575 +0,0 @@
|
|
|
--// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
--
|
|
|
--#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
--#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
--#include <dt-bindings/phy/phy.h>
|
|
|
--#include <dt-bindings/soc/bcm-pmb.h>
|
|
|
--
|
|
|
--/dts-v1/;
|
|
|
--
|
|
|
--/ {
|
|
|
-- interrupt-parent = <&gic>;
|
|
|
--
|
|
|
-- #address-cells = <2>;
|
|
|
-- #size-cells = <2>;
|
|
|
--
|
|
|
-- aliases {
|
|
|
-- serial0 = &uart0;
|
|
|
-- };
|
|
|
--
|
|
|
-- chosen {
|
|
|
-- stdout-path = "serial0:115200n8";
|
|
|
-- };
|
|
|
--
|
|
|
-- cpus {
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <0>;
|
|
|
--
|
|
|
-- cpu0: cpu@0 {
|
|
|
-- device_type = "cpu";
|
|
|
-- compatible = "brcm,brahma-b53";
|
|
|
-- reg = <0x0>;
|
|
|
-- enable-method = "spin-table";
|
|
|
-- cpu-release-addr = <0x0 0xfff8>;
|
|
|
-- next-level-cache = <&l2>;
|
|
|
-- };
|
|
|
--
|
|
|
-- cpu1: cpu@1 {
|
|
|
-- device_type = "cpu";
|
|
|
-- compatible = "brcm,brahma-b53";
|
|
|
-- reg = <0x1>;
|
|
|
-- enable-method = "spin-table";
|
|
|
-- cpu-release-addr = <0x0 0xfff8>;
|
|
|
-- next-level-cache = <&l2>;
|
|
|
-- };
|
|
|
--
|
|
|
-- cpu2: cpu@2 {
|
|
|
-- device_type = "cpu";
|
|
|
-- compatible = "brcm,brahma-b53";
|
|
|
-- reg = <0x2>;
|
|
|
-- enable-method = "spin-table";
|
|
|
-- cpu-release-addr = <0x0 0xfff8>;
|
|
|
-- next-level-cache = <&l2>;
|
|
|
-- };
|
|
|
--
|
|
|
-- cpu3: cpu@3 {
|
|
|
-- device_type = "cpu";
|
|
|
-- compatible = "brcm,brahma-b53";
|
|
|
-- reg = <0x3>;
|
|
|
-- enable-method = "spin-table";
|
|
|
-- cpu-release-addr = <0x0 0xfff8>;
|
|
|
-- next-level-cache = <&l2>;
|
|
|
-- };
|
|
|
--
|
|
|
-- l2: l2-cache0 {
|
|
|
-- compatible = "cache";
|
|
|
-- };
|
|
|
-- };
|
|
|
--
|
|
|
-- axi@81000000 {
|
|
|
-- compatible = "simple-bus";
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <1>;
|
|
|
-- ranges = <0x00 0x00 0x81000000 0x4000>;
|
|
|
--
|
|
|
-- gic: interrupt-controller@1000 {
|
|
|
-- compatible = "arm,gic-400";
|
|
|
-- #interrupt-cells = <3>;
|
|
|
-- #address-cells = <0>;
|
|
|
-- interrupt-controller;
|
|
|
-- reg = <0x1000 0x1000>,
|
|
|
-- <0x2000 0x2000>;
|
|
|
-- };
|
|
|
-- };
|
|
|
--
|
|
|
-- timer {
|
|
|
-- compatible = "arm,armv8-timer";
|
|
|
-- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
|
-- };
|
|
|
--
|
|
|
-- pmu {
|
|
|
-- compatible = "arm,cortex-a53-pmu";
|
|
|
-- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
-- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
-- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
-- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
|
|
|
-- };
|
|
|
--
|
|
|
-- clocks {
|
|
|
-- periph_clk: periph_clk {
|
|
|
-- compatible = "fixed-clock";
|
|
|
-- #clock-cells = <0>;
|
|
|
-- clock-frequency = <50000000>;
|
|
|
-- clock-output-names = "periph";
|
|
|
-- };
|
|
|
-- };
|
|
|
--
|
|
|
-- soc {
|
|
|
-- compatible = "simple-bus";
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <1>;
|
|
|
-- ranges = <0x00 0x00 0x80000000 0x281000>;
|
|
|
--
|
|
|
-- enet: ethernet@2000 {
|
|
|
-- compatible = "brcm,bcm4908-enet";
|
|
|
-- reg = <0x2000 0x1000>;
|
|
|
--
|
|
|
-- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
-- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-- interrupt-names = "rx", "tx";
|
|
|
-- };
|
|
|
--
|
|
|
-- usb_phy: usb-phy@c200 {
|
|
|
-- compatible = "brcm,bcm4908-usb-phy";
|
|
|
-- reg = <0xc200 0x100>;
|
|
|
-- reg-names = "ctrl";
|
|
|
-- power-domains = <&pmb BCM_PMB_HOST_USB>;
|
|
|
-- dr_mode = "host";
|
|
|
-- brcm,has-xhci;
|
|
|
-- brcm,has-eohci;
|
|
|
-- #phy-cells = <1>;
|
|
|
-- status = "disabled";
|
|
|
-- };
|
|
|
--
|
|
|
-- ehci: usb@c300 {
|
|
|
-- compatible = "generic-ehci";
|
|
|
-- reg = <0xc300 0x100>;
|
|
|
-- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-- phys = <&usb_phy PHY_TYPE_USB2>;
|
|
|
-- status = "disabled";
|
|
|
-- };
|
|
|
--
|
|
|
-- ohci: usb@c400 {
|
|
|
-- compatible = "generic-ohci";
|
|
|
-- reg = <0xc400 0x100>;
|
|
|
-- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-- phys = <&usb_phy PHY_TYPE_USB2>;
|
|
|
-- status = "disabled";
|
|
|
-- };
|
|
|
--
|
|
|
-- xhci: usb@d000 {
|
|
|
-- compatible = "generic-xhci";
|
|
|
-- reg = <0xd000 0x8c8>;
|
|
|
-- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-- phys = <&usb_phy PHY_TYPE_USB3>;
|
|
|
-- status = "disabled";
|
|
|
-- };
|
|
|
--
|
|
|
-- bus@80000 {
|
|
|
-- compatible = "simple-bus";
|
|
|
-- #size-cells = <1>;
|
|
|
-- #address-cells = <1>;
|
|
|
-- ranges = <0 0x80000 0x50000>;
|
|
|
--
|
|
|
-- ethernet-switch@0 {
|
|
|
-- compatible = "brcm,bcm4908-switch";
|
|
|
-- reg = <0x0 0x40000>,
|
|
|
-- <0x40000 0x110>,
|
|
|
-- <0x40340 0x30>,
|
|
|
-- <0x40380 0x30>,
|
|
|
-- <0x40600 0x34>,
|
|
|
-- <0x40800 0x208>;
|
|
|
-- reg-names = "core", "reg", "intrl2_0",
|
|
|
-- "intrl2_1", "fcb", "acb";
|
|
|
-- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
-- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-- brcm,num-gphy = <5>;
|
|
|
-- brcm,num-rgmii-ports = <2>;
|
|
|
--
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <0>;
|
|
|
--
|
|
|
-- ports: ports {
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <0>;
|
|
|
--
|
|
|
-- port@0 {
|
|
|
-- reg = <0>;
|
|
|
-- phy-mode = "internal";
|
|
|
-- phy-handle = <&phy8>;
|
|
|
-- };
|
|
|
--
|
|
|
-- port@1 {
|
|
|
-- reg = <1>;
|
|
|
-- phy-mode = "internal";
|
|
|
-- phy-handle = <&phy9>;
|
|
|
-- };
|
|
|
--
|
|
|
-- port@2 {
|
|
|
-- reg = <2>;
|
|
|
-- phy-mode = "internal";
|
|
|
-- phy-handle = <&phy10>;
|
|
|
-- };
|
|
|
--
|
|
|
-- port@3 {
|
|
|
-- reg = <3>;
|
|
|
-- phy-mode = "internal";
|
|
|
-- phy-handle = <&phy11>;
|
|
|
-- };
|
|
|
--
|
|
|
-- port@8 {
|
|
|
-- reg = <8>;
|
|
|
-- phy-mode = "internal";
|
|
|
-- ethernet = <&enet>;
|
|
|
--
|
|
|
-- fixed-link {
|
|
|
-- speed = <1000>;
|
|
|
-- full-duplex;
|
|
|
-- };
|
|
|
-- };
|
|
|
-- };
|
|
|
-- };
|
|
|
--
|
|
|
-- mdio: mdio@405c0 {
|
|
|
-- compatible = "brcm,unimac-mdio";
|
|
|
-- reg = <0x405c0 0x8>;
|
|
|
-- reg-names = "mdio";
|
|
|
-- #size-cells = <0>;
|
|
|
-- #address-cells = <1>;
|
|
|
--
|
|
|
-- phy8: ethernet-phy@8 {
|
|
|
-- reg = <8>;
|
|
|
-- };
|
|
|
--
|
|
|
-- phy9: ethernet-phy@9 {
|
|
|
-- reg = <9>;
|
|
|
-- };
|
|
|
--
|
|
|
-- phy10: ethernet-phy@a {
|
|
|
-- reg = <10>;
|
|
|
-- };
|
|
|
--
|
|
|
-- phy11: ethernet-phy@b {
|
|
|
-- reg = <11>;
|
|
|
-- };
|
|
|
--
|
|
|
-- phy12: ethernet-phy@c {
|
|
|
-- reg = <12>;
|
|
|
-- };
|
|
|
-- };
|
|
|
-- };
|
|
|
--
|
|
|
-- procmon: syscon@280000 {
|
|
|
-- compatible = "simple-bus";
|
|
|
-- reg = <0x280000 0x1000>;
|
|
|
-- ranges;
|
|
|
--
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <1>;
|
|
|
--
|
|
|
-- pmb: power-controller@2800c0 {
|
|
|
-- compatible = "brcm,bcm4908-pmb";
|
|
|
-- reg = <0x2800c0 0x40>;
|
|
|
-- #power-domain-cells = <1>;
|
|
|
-- };
|
|
|
-- };
|
|
|
-- };
|
|
|
--
|
|
|
-- bus@ff800000 {
|
|
|
-- compatible = "simple-bus";
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <1>;
|
|
|
-- ranges = <0x00 0x00 0xff800000 0x3000>;
|
|
|
--
|
|
|
-- twd: timer-mfd@400 {
|
|
|
-- compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
|
|
|
-- reg = <0x400 0x4c>;
|
|
|
-- ranges = <0x0 0x400 0x4c>;
|
|
|
--
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <1>;
|
|
|
--
|
|
|
-- watchdog@28 {
|
|
|
-- compatible = "brcm,bcm6345-wdt";
|
|
|
-- reg = <0x28 0x8>;
|
|
|
-- };
|
|
|
-- };
|
|
|
--
|
|
|
-- gpio0: gpio-controller@500 {
|
|
|
-- compatible = "brcm,bcm6345-gpio";
|
|
|
-- reg-names = "dirout", "dat";
|
|
|
-- reg = <0x500 0x28>, <0x528 0x28>;
|
|
|
--
|
|
|
-- #gpio-cells = <2>;
|
|
|
-- gpio-controller;
|
|
|
-- };
|
|
|
--
|
|
|
-- pinctrl@560 {
|
|
|
-- compatible = "brcm,bcm4908-pinctrl";
|
|
|
-- reg = <0x560 0x10>;
|
|
|
--
|
|
|
-- pins_led_0_a: led_0-a-pins {
|
|
|
-- function = "led_0";
|
|
|
-- groups = "led_0_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_1_a: led_1-a-pins {
|
|
|
-- function = "led_1";
|
|
|
-- groups = "led_1_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_2_a: led_2-a-pins {
|
|
|
-- function = "led_2";
|
|
|
-- groups = "led_2_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_3_a: led_3-a-pins {
|
|
|
-- function = "led_3";
|
|
|
-- groups = "led_3_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_4_a: led_4-a-pins {
|
|
|
-- function = "led_4";
|
|
|
-- groups = "led_4_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_5_a: led_5-a-pins {
|
|
|
-- function = "led_5";
|
|
|
-- groups = "led_5_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_6_a: led_6-a-pins {
|
|
|
-- function = "led_6";
|
|
|
-- groups = "led_6_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_7_a: led_7-a-pins {
|
|
|
-- function = "led_7";
|
|
|
-- groups = "led_7_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_8_a: led_8-a-pins {
|
|
|
-- function = "led_8";
|
|
|
-- groups = "led_8_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_9_a: led_9-a-pins {
|
|
|
-- function = "led_9";
|
|
|
-- groups = "led_9_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_10_a: led_10-a-pins {
|
|
|
-- function = "led_10";
|
|
|
-- groups = "led_10_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_11_a: led_11-a-pins {
|
|
|
-- function = "led_11";
|
|
|
-- groups = "led_11_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_12_a: led_12-a-pins {
|
|
|
-- function = "led_12";
|
|
|
-- groups = "led_12_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_13_a: led_13-a-pins {
|
|
|
-- function = "led_13";
|
|
|
-- groups = "led_13_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_14_a: led_14-a-pins {
|
|
|
-- function = "led_14";
|
|
|
-- groups = "led_14_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_15_a: led_15-a-pins {
|
|
|
-- function = "led_15";
|
|
|
-- groups = "led_15_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_16_a: led_16-a-pins {
|
|
|
-- function = "led_16";
|
|
|
-- groups = "led_16_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_17_a: led_17-a-pins {
|
|
|
-- function = "led_17";
|
|
|
-- groups = "led_17_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_18_a: led_18-a-pins {
|
|
|
-- function = "led_18";
|
|
|
-- groups = "led_18_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_19_a: led_19-a-pins {
|
|
|
-- function = "led_19";
|
|
|
-- groups = "led_19_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_20_a: led_20-a-pins {
|
|
|
-- function = "led_20";
|
|
|
-- groups = "led_20_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_21_a: led_21-a-pins {
|
|
|
-- function = "led_21";
|
|
|
-- groups = "led_21_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_22_a: led_22-a-pins {
|
|
|
-- function = "led_22";
|
|
|
-- groups = "led_22_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_23_a: led_23-a-pins {
|
|
|
-- function = "led_23";
|
|
|
-- groups = "led_23_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_24_a: led_24-a-pins {
|
|
|
-- function = "led_24";
|
|
|
-- groups = "led_24_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_25_a: led_25-a-pins {
|
|
|
-- function = "led_25";
|
|
|
-- groups = "led_25_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_26_a: led_26-a-pins {
|
|
|
-- function = "led_26";
|
|
|
-- groups = "led_26_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_27_a: led_27-a-pins {
|
|
|
-- function = "led_27";
|
|
|
-- groups = "led_27_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_28_a: led_28-a-pins {
|
|
|
-- function = "led_28";
|
|
|
-- groups = "led_28_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_29_a: led_29-a-pins {
|
|
|
-- function = "led_29";
|
|
|
-- groups = "led_29_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_30_a: led_30-a-pins {
|
|
|
-- function = "led_30";
|
|
|
-- groups = "led_30_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_led_31_a: led_31-a-pins {
|
|
|
-- function = "led_31";
|
|
|
-- groups = "led_31_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_hs_uart: hs_uart-pins {
|
|
|
-- function = "hs_uart";
|
|
|
-- groups = "hs_uart_grp";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_i2c_a: i2c-a-pins {
|
|
|
-- function = "i2c";
|
|
|
-- groups = "i2c_grp_a";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_i2c_b: i2c-b-pins {
|
|
|
-- function = "i2c";
|
|
|
-- groups = "i2c_grp_b";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_i2s: i2s-pins {
|
|
|
-- function = "i2s";
|
|
|
-- groups = "i2s_grp";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_nand_ctrl: nand_ctrl-pins {
|
|
|
-- function = "nand_ctrl";
|
|
|
-- groups = "nand_ctrl_grp";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_nand_data: nand_data-pins {
|
|
|
-- function = "nand_data";
|
|
|
-- groups = "nand_data_grp";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_emmc_ctrl: emmc_ctrl-pins {
|
|
|
-- function = "emmc_ctrl";
|
|
|
-- groups = "emmc_ctrl_grp";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_usb0_pwr: usb0_pwr-pins {
|
|
|
-- function = "usb0_pwr";
|
|
|
-- groups = "usb0_pwr_grp";
|
|
|
-- };
|
|
|
--
|
|
|
-- pins_usb1_pwr: usb1_pwr-pins {
|
|
|
-- function = "usb1_pwr";
|
|
|
-- groups = "usb1_pwr_grp";
|
|
|
-- };
|
|
|
-- };
|
|
|
--
|
|
|
-- uart0: serial@640 {
|
|
|
-- compatible = "brcm,bcm6345-uart";
|
|
|
-- reg = <0x640 0x18>;
|
|
|
-- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-- clocks = <&periph_clk>;
|
|
|
-- clock-names = "refclk";
|
|
|
-- status = "okay";
|
|
|
-- };
|
|
|
--
|
|
|
-- leds: leds@800 {
|
|
|
-- compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
|
|
|
-- reg = <0x800 0xdc>;
|
|
|
--
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <0>;
|
|
|
-- };
|
|
|
--
|
|
|
-- nand-controller@1800 {
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <0>;
|
|
|
-- compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
|
|
|
-- reg = <0x1800 0x600>, <0x2000 0x10>;
|
|
|
-- reg-names = "nand", "nand-int-base";
|
|
|
-- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-- interrupt-names = "nand";
|
|
|
-- status = "okay";
|
|
|
--
|
|
|
-- nandcs: nand@0 {
|
|
|
-- compatible = "brcm,nandcs";
|
|
|
-- reg = <0>;
|
|
|
-- };
|
|
|
-- };
|
|
|
--
|
|
|
-- i2c@2100 {
|
|
|
-- compatible = "brcm,brcmper-i2c";
|
|
|
-- reg = <0x2100 0x58>;
|
|
|
-- clock-frequency = <97500>;
|
|
|
-- pinctrl-names = "default";
|
|
|
-- pinctrl-0 = <&pins_i2c_a>;
|
|
|
-- status = "disabled";
|
|
|
-- };
|
|
|
--
|
|
|
-- misc@2600 {
|
|
|
-- compatible = "brcm,misc", "simple-mfd";
|
|
|
-- reg = <0x2600 0xe4>;
|
|
|
--
|
|
|
-- #address-cells = <1>;
|
|
|
-- #size-cells = <1>;
|
|
|
-- ranges = <0x00 0x2600 0xe4>;
|
|
|
--
|
|
|
-- reset-controller@2644 {
|
|
|
-- compatible = "brcm,bcm4908-misc-pcie-reset";
|
|
|
-- reg = <0x44 0x04>;
|
|
|
-- #reset-cells = <1>;
|
|
|
-- };
|
|
|
-- };
|
|
|
-- };
|
|
|
--
|
|
|
-- reboot {
|
|
|
-- compatible = "syscon-reboot";
|
|
|
-- regmap = <&twd>;
|
|
|
-- offset = <0x34>;
|
|
|
-- mask = <1>;
|
|
|
-- };
|
|
|
--};
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
|
|
|
-@@ -0,0 +1,157 @@
|
|
|
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
-+
|
|
|
-+#include <dt-bindings/gpio/gpio.h>
|
|
|
-+#include <dt-bindings/input/input.h>
|
|
|
-+#include <dt-bindings/leds/common.h>
|
|
|
-+
|
|
|
-+#include "bcm4906.dtsi"
|
|
|
-+
|
|
|
-+/ {
|
|
|
-+ compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
|
|
|
-+ model = "Netgear R8000P";
|
|
|
-+
|
|
|
-+ memory@0 {
|
|
|
-+ device_type = "memory";
|
|
|
-+ reg = <0x00 0x00 0x00 0x20000000>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ leds {
|
|
|
-+ compatible = "gpio-leds";
|
|
|
-+
|
|
|
-+ led-power-white {
|
|
|
-+ function = LED_FUNCTION_POWER;
|
|
|
-+ color = <LED_COLOR_ID_WHITE>;
|
|
|
-+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-power-amber {
|
|
|
-+ function = LED_FUNCTION_POWER;
|
|
|
-+ color = <LED_COLOR_ID_AMBER>;
|
|
|
-+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-wps {
|
|
|
-+ function = LED_FUNCTION_WPS;
|
|
|
-+ color = <LED_COLOR_ID_WHITE>;
|
|
|
-+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-2ghz {
|
|
|
-+ function = "2ghz";
|
|
|
-+ color = <LED_COLOR_ID_WHITE>;
|
|
|
-+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-5ghz-1 {
|
|
|
-+ function = "5ghz-1";
|
|
|
-+ color = <LED_COLOR_ID_WHITE>;
|
|
|
-+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-5ghz-2 {
|
|
|
-+ function = "5ghz-2";
|
|
|
-+ color = <LED_COLOR_ID_WHITE>;
|
|
|
-+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-usb2 {
|
|
|
-+ function = "usb2";
|
|
|
-+ color = <LED_COLOR_ID_WHITE>;
|
|
|
-+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-usb3 {
|
|
|
-+ function = "usb3";
|
|
|
-+ color = <LED_COLOR_ID_WHITE>;
|
|
|
-+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-wifi {
|
|
|
-+ function = "wifi";
|
|
|
-+ color = <LED_COLOR_ID_WHITE>;
|
|
|
-+ gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+};
|
|
|
-+
|
|
|
-+&enet {
|
|
|
-+ nvmem-cells = <&base_mac_addr>;
|
|
|
-+ nvmem-cell-names = "mac-address";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&usb_phy {
|
|
|
-+ brcm,ioc = <1>;
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&ehci {
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&ohci {
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&xhci {
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&ports {
|
|
|
-+ port@0 {
|
|
|
-+ label = "lan4";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@1 {
|
|
|
-+ label = "lan3";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@2 {
|
|
|
-+ label = "lan2";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@3 {
|
|
|
-+ label = "lan1";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@7 {
|
|
|
-+ reg = <7>;
|
|
|
-+ phy-mode = "internal";
|
|
|
-+ phy-handle = <&phy12>;
|
|
|
-+ label = "wan";
|
|
|
-+ };
|
|
|
-+};
|
|
|
-+
|
|
|
-+&nandcs {
|
|
|
-+ nand-ecc-strength = <4>;
|
|
|
-+ nand-ecc-step-size = <512>;
|
|
|
-+ nand-on-flash-bbt;
|
|
|
-+
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <0>;
|
|
|
-+
|
|
|
-+ partitions {
|
|
|
-+ compatible = "fixed-partitions";
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <1>;
|
|
|
-+
|
|
|
-+ partition@0 {
|
|
|
-+ compatible = "nvmem-cells";
|
|
|
-+ label = "cferom";
|
|
|
-+ reg = <0x0 0x100000>;
|
|
|
-+
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <1>;
|
|
|
-+ ranges = <0 0x0 0x100000>;
|
|
|
-+
|
|
|
-+ base_mac_addr: mac@106a0 {
|
|
|
-+ reg = <0x106a0 0x6>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ partition@100000 {
|
|
|
-+ compatible = "brcm,bcm4908-firmware";
|
|
|
-+ label = "firmware";
|
|
|
-+ reg = <0x100000 0x4400000>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+};
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
|
|
|
-@@ -0,0 +1,182 @@
|
|
|
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
-+
|
|
|
-+#include <dt-bindings/gpio/gpio.h>
|
|
|
-+#include <dt-bindings/input/input.h>
|
|
|
-+#include <dt-bindings/leds/common.h>
|
|
|
-+
|
|
|
-+#include "bcm4906.dtsi"
|
|
|
-+
|
|
|
-+/ {
|
|
|
-+ compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
|
|
|
-+ model = "TP-Link Archer C2300 V1";
|
|
|
-+
|
|
|
-+ memory@0 {
|
|
|
-+ device_type = "memory";
|
|
|
-+ reg = <0x00 0x00 0x00 0x20000000>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ leds {
|
|
|
-+ compatible = "gpio-leds";
|
|
|
-+
|
|
|
-+ led-power {
|
|
|
-+ function = LED_FUNCTION_POWER;
|
|
|
-+ color = <LED_COLOR_ID_BLUE>;
|
|
|
-+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-2ghz {
|
|
|
-+ function = "2ghz";
|
|
|
-+ color = <LED_COLOR_ID_BLUE>;
|
|
|
-+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-5ghz {
|
|
|
-+ function = "5ghz";
|
|
|
-+ color = <LED_COLOR_ID_BLUE>;
|
|
|
-+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-wan-amber {
|
|
|
-+ function = LED_FUNCTION_WAN;
|
|
|
-+ color = <LED_COLOR_ID_AMBER>;
|
|
|
-+ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-wan-blue {
|
|
|
-+ function = LED_FUNCTION_WAN;
|
|
|
-+ color = <LED_COLOR_ID_BLUE>;
|
|
|
-+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-lan {
|
|
|
-+ function = LED_FUNCTION_LAN;
|
|
|
-+ color = <LED_COLOR_ID_BLUE>;
|
|
|
-+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-wps {
|
|
|
-+ function = LED_FUNCTION_WPS;
|
|
|
-+ color = <LED_COLOR_ID_BLUE>;
|
|
|
-+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-usb2 {
|
|
|
-+ function = "usb2";
|
|
|
-+ color = <LED_COLOR_ID_BLUE>;
|
|
|
-+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-usb3 {
|
|
|
-+ function = "usbd3";
|
|
|
-+ color = <LED_COLOR_ID_BLUE>;
|
|
|
-+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-brightness {
|
|
|
-+ function = LED_FUNCTION_BACKLIGHT;
|
|
|
-+ color = <LED_COLOR_ID_WHITE>;
|
|
|
-+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ gpio-keys-polled {
|
|
|
-+ compatible = "gpio-keys-polled";
|
|
|
-+ poll-interval = <100>;
|
|
|
-+
|
|
|
-+ key-brightness {
|
|
|
-+ label = "LEDs";
|
|
|
-+ linux,code = <KEY_BRIGHTNESS_ZERO>;
|
|
|
-+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ key-wps {
|
|
|
-+ label = "WPS";
|
|
|
-+ linux,code = <KEY_WPS_BUTTON>;
|
|
|
-+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ key-wifi {
|
|
|
-+ label = "WiFi";
|
|
|
-+ linux,code = <KEY_RFKILL>;
|
|
|
-+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ key-restart {
|
|
|
-+ label = "Reset";
|
|
|
-+ linux,code = <KEY_RESTART>;
|
|
|
-+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+};
|
|
|
-+
|
|
|
-+&usb_phy {
|
|
|
-+ brcm,ioc = <1>;
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&ehci {
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&ohci {
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&xhci {
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&ports {
|
|
|
-+ port@0 {
|
|
|
-+ label = "lan4";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@1 {
|
|
|
-+ label = "lan3";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@2 {
|
|
|
-+ label = "lan2";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@3 {
|
|
|
-+ label = "lan1";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@7 {
|
|
|
-+ reg = <7>;
|
|
|
-+ phy-mode = "internal";
|
|
|
-+ phy-handle = <&phy12>;
|
|
|
-+ label = "wan";
|
|
|
-+ };
|
|
|
-+};
|
|
|
-+
|
|
|
-+&nandcs {
|
|
|
-+ nand-ecc-strength = <4>;
|
|
|
-+ nand-ecc-step-size = <512>;
|
|
|
-+ nand-on-flash-bbt;
|
|
|
-+
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <0>;
|
|
|
-+
|
|
|
-+ partitions {
|
|
|
-+ compatible = "brcm,bcm4908-partitions";
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <1>;
|
|
|
-+
|
|
|
-+ partition@0 {
|
|
|
-+ label = "cferom";
|
|
|
-+ reg = <0x0 0x100000>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ partition@100000 {
|
|
|
-+ compatible = "brcm,bcm4908-firmware";
|
|
|
-+ reg = <0x100000 0x3900000>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ partition@5800000 {
|
|
|
-+ compatible = "brcm,bcm4908-firmware";
|
|
|
-+ reg = <0x3a00000 0x3900000>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+};
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
|
|
|
-@@ -0,0 +1,34 @@
|
|
|
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
-+
|
|
|
-+#include "bcm4908.dtsi"
|
|
|
-+
|
|
|
-+/ {
|
|
|
-+ cpus {
|
|
|
-+ /delete-node/ cpu@2;
|
|
|
-+
|
|
|
-+ /delete-node/ cpu@3;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ timer {
|
|
|
-+ compatible = "arm,armv8-timer";
|
|
|
-+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ timer {
|
|
|
-+ compatible = "arm,armv8-timer";
|
|
|
-+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pmu {
|
|
|
-+ compatible = "arm,cortex-a53-pmu";
|
|
|
-+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
-+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-+ interrupt-affinity = <&cpu0>, <&cpu1>;
|
|
|
-+ };
|
|
|
-+};
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
|
|
|
-@@ -0,0 +1,207 @@
|
|
|
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
-+
|
|
|
-+#include <dt-bindings/gpio/gpio.h>
|
|
|
-+#include <dt-bindings/input/input.h>
|
|
|
-+#include <dt-bindings/leds/common.h>
|
|
|
-+
|
|
|
-+#include "bcm4908.dtsi"
|
|
|
-+
|
|
|
-+/ {
|
|
|
-+ compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca";
|
|
|
-+ model = "Asus GT-AC5300";
|
|
|
-+
|
|
|
-+ memory@0 {
|
|
|
-+ device_type = "memory";
|
|
|
-+ reg = <0x00 0x00 0x00 0x40000000>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ gpio-keys-polled {
|
|
|
-+ compatible = "gpio-keys-polled";
|
|
|
-+ poll-interval = <100>;
|
|
|
-+
|
|
|
-+ key-wifi {
|
|
|
-+ label = "WiFi";
|
|
|
-+ linux,code = <KEY_RFKILL>;
|
|
|
-+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ key-wps {
|
|
|
-+ label = "WPS";
|
|
|
-+ linux,code = <KEY_WPS_BUTTON>;
|
|
|
-+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ key-restart {
|
|
|
-+ label = "Reset";
|
|
|
-+ linux,code = <KEY_RESTART>;
|
|
|
-+ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ key-brightness {
|
|
|
-+ label = "LEDs";
|
|
|
-+ linux,code = <KEY_BRIGHTNESS_ZERO>;
|
|
|
-+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+};
|
|
|
-+
|
|
|
-+&enet {
|
|
|
-+ nvmem-cells = <&base_mac_addr>;
|
|
|
-+ nvmem-cell-names = "mac-address";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&usb_phy {
|
|
|
-+ brcm,ioc = <1>;
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&ehci {
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&ohci {
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&xhci {
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&ports {
|
|
|
-+ port@0 {
|
|
|
-+ label = "lan2";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@1 {
|
|
|
-+ label = "lan1";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@2 {
|
|
|
-+ label = "lan6";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@3 {
|
|
|
-+ label = "lan5";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ /* External BCM53134S switch */
|
|
|
-+ port@7 {
|
|
|
-+ label = "sw";
|
|
|
-+ reg = <7>;
|
|
|
-+ phy-mode = "rgmii";
|
|
|
-+
|
|
|
-+ fixed-link {
|
|
|
-+ speed = <1000>;
|
|
|
-+ full-duplex;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+};
|
|
|
-+
|
|
|
-+&mdio {
|
|
|
-+ /* lan8 */
|
|
|
-+ ethernet-phy@0 {
|
|
|
-+ reg = <0>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ /* lan7 */
|
|
|
-+ ethernet-phy@1 {
|
|
|
-+ reg = <1>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ /* lan4 */
|
|
|
-+ ethernet-phy@2 {
|
|
|
-+ reg = <2>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ /* lan3 */
|
|
|
-+ ethernet-phy@3 {
|
|
|
-+ reg = <3>;
|
|
|
-+ };
|
|
|
-+};
|
|
|
-+
|
|
|
-+&leds {
|
|
|
-+ led-power@11 {
|
|
|
-+ reg = <0x11>;
|
|
|
-+ function = LED_FUNCTION_POWER;
|
|
|
-+ color = <LED_COLOR_ID_WHITE>;
|
|
|
-+ default-state = "on";
|
|
|
-+ active-low;
|
|
|
-+ pinctrl-names = "default";
|
|
|
-+ pinctrl-0 = <&pins_led_17_a>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-wan-red@12 {
|
|
|
-+ reg = <0x12>;
|
|
|
-+ function = LED_FUNCTION_WAN;
|
|
|
-+ color = <LED_COLOR_ID_RED>;
|
|
|
-+ active-low;
|
|
|
-+ pinctrl-names = "default";
|
|
|
-+ pinctrl-0 = <&pins_led_18_a>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-wps@14 {
|
|
|
-+ reg = <0x14>;
|
|
|
-+ function = LED_FUNCTION_WPS;
|
|
|
-+ color = <LED_COLOR_ID_WHITE>;
|
|
|
-+ active-low;
|
|
|
-+ pinctrl-names = "default";
|
|
|
-+ pinctrl-0 = <&pins_led_20_a>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-wan-white@15 {
|
|
|
-+ reg = <0x15>;
|
|
|
-+ function = LED_FUNCTION_WAN;
|
|
|
-+ color = <LED_COLOR_ID_WHITE>;
|
|
|
-+ active-low;
|
|
|
-+ pinctrl-names = "default";
|
|
|
-+ pinctrl-0 = <&pins_led_21_a>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ led-lan@19 {
|
|
|
-+ reg = <0x19>;
|
|
|
-+ function = LED_FUNCTION_LAN;
|
|
|
-+ color = <LED_COLOR_ID_WHITE>;
|
|
|
-+ pinctrl-names = "default";
|
|
|
-+ pinctrl-0 = <&pins_led_25_a>;
|
|
|
-+ };
|
|
|
-+};
|
|
|
-+
|
|
|
-+&nandcs {
|
|
|
-+ nand-ecc-strength = <4>;
|
|
|
-+ nand-ecc-step-size = <512>;
|
|
|
-+ nand-on-flash-bbt;
|
|
|
-+ brcm,nand-has-wp;
|
|
|
-+
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <0>;
|
|
|
-+
|
|
|
-+ partitions {
|
|
|
-+ compatible = "brcm,bcm4908-partitions";
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <1>;
|
|
|
-+
|
|
|
-+ partition@0 {
|
|
|
-+ compatible = "nvmem-cells";
|
|
|
-+ label = "cferom";
|
|
|
-+ reg = <0x0 0x100000>;
|
|
|
-+
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <1>;
|
|
|
-+ ranges = <0 0x0 0x100000>;
|
|
|
-+
|
|
|
-+ base_mac_addr: mac@106a0 {
|
|
|
-+ reg = <0x106a0 0x6>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ partition@100000 {
|
|
|
-+ compatible = "brcm,bcm4908-firmware";
|
|
|
-+ reg = <0x100000 0x5700000>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ partition@5800000 {
|
|
|
-+ compatible = "brcm,bcm4908-firmware";
|
|
|
-+ reg = <0x5800000 0x5700000>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+};
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
|
|
|
-@@ -0,0 +1,50 @@
|
|
|
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
-+
|
|
|
-+#include "bcm4908.dtsi"
|
|
|
-+
|
|
|
-+/ {
|
|
|
-+ compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca";
|
|
|
-+ model = "Netgear RAXE500";
|
|
|
-+
|
|
|
-+ memory@0 {
|
|
|
-+ device_type = "memory";
|
|
|
-+ reg = <0x00 0x00 0x00 0x40000000>;
|
|
|
-+ };
|
|
|
-+};
|
|
|
-+
|
|
|
-+&ehci {
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&ohci {
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&xhci {
|
|
|
-+ status = "okay";
|
|
|
-+};
|
|
|
-+
|
|
|
-+&ports {
|
|
|
-+ port@0 {
|
|
|
-+ label = "lan4";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@1 {
|
|
|
-+ label = "lan3";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@2 {
|
|
|
-+ label = "lan2";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@3 {
|
|
|
-+ label = "lan1";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@7 {
|
|
|
-+ reg = <7>;
|
|
|
-+ phy-mode = "internal";
|
|
|
-+ phy-handle = <&phy12>;
|
|
|
-+ label = "wan";
|
|
|
-+ };
|
|
|
-+};
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
|
|
|
-@@ -0,0 +1,575 @@
|
|
|
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
-+
|
|
|
-+#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
-+#include <dt-bindings/phy/phy.h>
|
|
|
-+#include <dt-bindings/soc/bcm-pmb.h>
|
|
|
-+
|
|
|
-+/dts-v1/;
|
|
|
-+
|
|
|
-+/ {
|
|
|
-+ interrupt-parent = <&gic>;
|
|
|
-+
|
|
|
-+ #address-cells = <2>;
|
|
|
-+ #size-cells = <2>;
|
|
|
-+
|
|
|
-+ aliases {
|
|
|
-+ serial0 = &uart0;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ chosen {
|
|
|
-+ stdout-path = "serial0:115200n8";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ cpus {
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <0>;
|
|
|
-+
|
|
|
-+ cpu0: cpu@0 {
|
|
|
-+ device_type = "cpu";
|
|
|
-+ compatible = "brcm,brahma-b53";
|
|
|
-+ reg = <0x0>;
|
|
|
-+ enable-method = "spin-table";
|
|
|
-+ cpu-release-addr = <0x0 0xfff8>;
|
|
|
-+ next-level-cache = <&l2>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ cpu1: cpu@1 {
|
|
|
-+ device_type = "cpu";
|
|
|
-+ compatible = "brcm,brahma-b53";
|
|
|
-+ reg = <0x1>;
|
|
|
-+ enable-method = "spin-table";
|
|
|
-+ cpu-release-addr = <0x0 0xfff8>;
|
|
|
-+ next-level-cache = <&l2>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ cpu2: cpu@2 {
|
|
|
-+ device_type = "cpu";
|
|
|
-+ compatible = "brcm,brahma-b53";
|
|
|
-+ reg = <0x2>;
|
|
|
-+ enable-method = "spin-table";
|
|
|
-+ cpu-release-addr = <0x0 0xfff8>;
|
|
|
-+ next-level-cache = <&l2>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ cpu3: cpu@3 {
|
|
|
-+ device_type = "cpu";
|
|
|
-+ compatible = "brcm,brahma-b53";
|
|
|
-+ reg = <0x3>;
|
|
|
-+ enable-method = "spin-table";
|
|
|
-+ cpu-release-addr = <0x0 0xfff8>;
|
|
|
-+ next-level-cache = <&l2>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ l2: l2-cache0 {
|
|
|
-+ compatible = "cache";
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ axi@81000000 {
|
|
|
-+ compatible = "simple-bus";
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <1>;
|
|
|
-+ ranges = <0x00 0x00 0x81000000 0x4000>;
|
|
|
-+
|
|
|
-+ gic: interrupt-controller@1000 {
|
|
|
-+ compatible = "arm,gic-400";
|
|
|
-+ #interrupt-cells = <3>;
|
|
|
-+ #address-cells = <0>;
|
|
|
-+ interrupt-controller;
|
|
|
-+ reg = <0x1000 0x1000>,
|
|
|
-+ <0x2000 0x2000>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ timer {
|
|
|
-+ compatible = "arm,armv8-timer";
|
|
|
-+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
-+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pmu {
|
|
|
-+ compatible = "arm,cortex-a53-pmu";
|
|
|
-+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
-+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
-+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
-+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ clocks {
|
|
|
-+ periph_clk: periph_clk {
|
|
|
-+ compatible = "fixed-clock";
|
|
|
-+ #clock-cells = <0>;
|
|
|
-+ clock-frequency = <50000000>;
|
|
|
-+ clock-output-names = "periph";
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ soc {
|
|
|
-+ compatible = "simple-bus";
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <1>;
|
|
|
-+ ranges = <0x00 0x00 0x80000000 0x281000>;
|
|
|
-+
|
|
|
-+ enet: ethernet@2000 {
|
|
|
-+ compatible = "brcm,bcm4908-enet";
|
|
|
-+ reg = <0x2000 0x1000>;
|
|
|
-+
|
|
|
-+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
-+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-+ interrupt-names = "rx", "tx";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ usb_phy: usb-phy@c200 {
|
|
|
-+ compatible = "brcm,bcm4908-usb-phy";
|
|
|
-+ reg = <0xc200 0x100>;
|
|
|
-+ reg-names = "ctrl";
|
|
|
-+ power-domains = <&pmb BCM_PMB_HOST_USB>;
|
|
|
-+ dr_mode = "host";
|
|
|
-+ brcm,has-xhci;
|
|
|
-+ brcm,has-eohci;
|
|
|
-+ #phy-cells = <1>;
|
|
|
-+ status = "disabled";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ ehci: usb@c300 {
|
|
|
-+ compatible = "generic-ehci";
|
|
|
-+ reg = <0xc300 0x100>;
|
|
|
-+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-+ phys = <&usb_phy PHY_TYPE_USB2>;
|
|
|
-+ status = "disabled";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ ohci: usb@c400 {
|
|
|
-+ compatible = "generic-ohci";
|
|
|
-+ reg = <0xc400 0x100>;
|
|
|
-+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-+ phys = <&usb_phy PHY_TYPE_USB2>;
|
|
|
-+ status = "disabled";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ xhci: usb@d000 {
|
|
|
-+ compatible = "generic-xhci";
|
|
|
-+ reg = <0xd000 0x8c8>;
|
|
|
-+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-+ phys = <&usb_phy PHY_TYPE_USB3>;
|
|
|
-+ status = "disabled";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ bus@80000 {
|
|
|
-+ compatible = "simple-bus";
|
|
|
-+ #size-cells = <1>;
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ ranges = <0 0x80000 0x50000>;
|
|
|
-+
|
|
|
-+ ethernet-switch@0 {
|
|
|
-+ compatible = "brcm,bcm4908-switch";
|
|
|
-+ reg = <0x0 0x40000>,
|
|
|
-+ <0x40000 0x110>,
|
|
|
-+ <0x40340 0x30>,
|
|
|
-+ <0x40380 0x30>,
|
|
|
-+ <0x40600 0x34>,
|
|
|
-+ <0x40800 0x208>;
|
|
|
-+ reg-names = "core", "reg", "intrl2_0",
|
|
|
-+ "intrl2_1", "fcb", "acb";
|
|
|
-+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
-+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-+ brcm,num-gphy = <5>;
|
|
|
-+ brcm,num-rgmii-ports = <2>;
|
|
|
-+
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <0>;
|
|
|
-+
|
|
|
-+ ports: ports {
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <0>;
|
|
|
-+
|
|
|
-+ port@0 {
|
|
|
-+ reg = <0>;
|
|
|
-+ phy-mode = "internal";
|
|
|
-+ phy-handle = <&phy8>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@1 {
|
|
|
-+ reg = <1>;
|
|
|
-+ phy-mode = "internal";
|
|
|
-+ phy-handle = <&phy9>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@2 {
|
|
|
-+ reg = <2>;
|
|
|
-+ phy-mode = "internal";
|
|
|
-+ phy-handle = <&phy10>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@3 {
|
|
|
-+ reg = <3>;
|
|
|
-+ phy-mode = "internal";
|
|
|
-+ phy-handle = <&phy11>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ port@8 {
|
|
|
-+ reg = <8>;
|
|
|
-+ phy-mode = "internal";
|
|
|
-+ ethernet = <&enet>;
|
|
|
-+
|
|
|
-+ fixed-link {
|
|
|
-+ speed = <1000>;
|
|
|
-+ full-duplex;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ mdio: mdio@405c0 {
|
|
|
-+ compatible = "brcm,unimac-mdio";
|
|
|
-+ reg = <0x405c0 0x8>;
|
|
|
-+ reg-names = "mdio";
|
|
|
-+ #size-cells = <0>;
|
|
|
-+ #address-cells = <1>;
|
|
|
-+
|
|
|
-+ phy8: ethernet-phy@8 {
|
|
|
-+ reg = <8>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ phy9: ethernet-phy@9 {
|
|
|
-+ reg = <9>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ phy10: ethernet-phy@a {
|
|
|
-+ reg = <10>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ phy11: ethernet-phy@b {
|
|
|
-+ reg = <11>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ phy12: ethernet-phy@c {
|
|
|
-+ reg = <12>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ procmon: syscon@280000 {
|
|
|
-+ compatible = "simple-bus";
|
|
|
-+ reg = <0x280000 0x1000>;
|
|
|
-+ ranges;
|
|
|
-+
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <1>;
|
|
|
-+
|
|
|
-+ pmb: power-controller@2800c0 {
|
|
|
-+ compatible = "brcm,bcm4908-pmb";
|
|
|
-+ reg = <0x2800c0 0x40>;
|
|
|
-+ #power-domain-cells = <1>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ bus@ff800000 {
|
|
|
-+ compatible = "simple-bus";
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <1>;
|
|
|
-+ ranges = <0x00 0x00 0xff800000 0x3000>;
|
|
|
-+
|
|
|
-+ twd: timer-mfd@400 {
|
|
|
-+ compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
|
|
|
-+ reg = <0x400 0x4c>;
|
|
|
-+ ranges = <0x0 0x400 0x4c>;
|
|
|
-+
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <1>;
|
|
|
-+
|
|
|
-+ watchdog@28 {
|
|
|
-+ compatible = "brcm,bcm6345-wdt";
|
|
|
-+ reg = <0x28 0x8>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ gpio0: gpio-controller@500 {
|
|
|
-+ compatible = "brcm,bcm6345-gpio";
|
|
|
-+ reg-names = "dirout", "dat";
|
|
|
-+ reg = <0x500 0x28>, <0x528 0x28>;
|
|
|
-+
|
|
|
-+ #gpio-cells = <2>;
|
|
|
-+ gpio-controller;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pinctrl@560 {
|
|
|
-+ compatible = "brcm,bcm4908-pinctrl";
|
|
|
-+ reg = <0x560 0x10>;
|
|
|
-+
|
|
|
-+ pins_led_0_a: led_0-a-pins {
|
|
|
-+ function = "led_0";
|
|
|
-+ groups = "led_0_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_1_a: led_1-a-pins {
|
|
|
-+ function = "led_1";
|
|
|
-+ groups = "led_1_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_2_a: led_2-a-pins {
|
|
|
-+ function = "led_2";
|
|
|
-+ groups = "led_2_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_3_a: led_3-a-pins {
|
|
|
-+ function = "led_3";
|
|
|
-+ groups = "led_3_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_4_a: led_4-a-pins {
|
|
|
-+ function = "led_4";
|
|
|
-+ groups = "led_4_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_5_a: led_5-a-pins {
|
|
|
-+ function = "led_5";
|
|
|
-+ groups = "led_5_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_6_a: led_6-a-pins {
|
|
|
-+ function = "led_6";
|
|
|
-+ groups = "led_6_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_7_a: led_7-a-pins {
|
|
|
-+ function = "led_7";
|
|
|
-+ groups = "led_7_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_8_a: led_8-a-pins {
|
|
|
-+ function = "led_8";
|
|
|
-+ groups = "led_8_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_9_a: led_9-a-pins {
|
|
|
-+ function = "led_9";
|
|
|
-+ groups = "led_9_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_10_a: led_10-a-pins {
|
|
|
-+ function = "led_10";
|
|
|
-+ groups = "led_10_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_11_a: led_11-a-pins {
|
|
|
-+ function = "led_11";
|
|
|
-+ groups = "led_11_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_12_a: led_12-a-pins {
|
|
|
-+ function = "led_12";
|
|
|
-+ groups = "led_12_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_13_a: led_13-a-pins {
|
|
|
-+ function = "led_13";
|
|
|
-+ groups = "led_13_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_14_a: led_14-a-pins {
|
|
|
-+ function = "led_14";
|
|
|
-+ groups = "led_14_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_15_a: led_15-a-pins {
|
|
|
-+ function = "led_15";
|
|
|
-+ groups = "led_15_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_16_a: led_16-a-pins {
|
|
|
-+ function = "led_16";
|
|
|
-+ groups = "led_16_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_17_a: led_17-a-pins {
|
|
|
-+ function = "led_17";
|
|
|
-+ groups = "led_17_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_18_a: led_18-a-pins {
|
|
|
-+ function = "led_18";
|
|
|
-+ groups = "led_18_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_19_a: led_19-a-pins {
|
|
|
-+ function = "led_19";
|
|
|
-+ groups = "led_19_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_20_a: led_20-a-pins {
|
|
|
-+ function = "led_20";
|
|
|
-+ groups = "led_20_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_21_a: led_21-a-pins {
|
|
|
-+ function = "led_21";
|
|
|
-+ groups = "led_21_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_22_a: led_22-a-pins {
|
|
|
-+ function = "led_22";
|
|
|
-+ groups = "led_22_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_23_a: led_23-a-pins {
|
|
|
-+ function = "led_23";
|
|
|
-+ groups = "led_23_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_24_a: led_24-a-pins {
|
|
|
-+ function = "led_24";
|
|
|
-+ groups = "led_24_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_25_a: led_25-a-pins {
|
|
|
-+ function = "led_25";
|
|
|
-+ groups = "led_25_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_26_a: led_26-a-pins {
|
|
|
-+ function = "led_26";
|
|
|
-+ groups = "led_26_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_27_a: led_27-a-pins {
|
|
|
-+ function = "led_27";
|
|
|
-+ groups = "led_27_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_28_a: led_28-a-pins {
|
|
|
-+ function = "led_28";
|
|
|
-+ groups = "led_28_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_29_a: led_29-a-pins {
|
|
|
-+ function = "led_29";
|
|
|
-+ groups = "led_29_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_30_a: led_30-a-pins {
|
|
|
-+ function = "led_30";
|
|
|
-+ groups = "led_30_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_led_31_a: led_31-a-pins {
|
|
|
-+ function = "led_31";
|
|
|
-+ groups = "led_31_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_hs_uart: hs_uart-pins {
|
|
|
-+ function = "hs_uart";
|
|
|
-+ groups = "hs_uart_grp";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_i2c_a: i2c-a-pins {
|
|
|
-+ function = "i2c";
|
|
|
-+ groups = "i2c_grp_a";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_i2c_b: i2c-b-pins {
|
|
|
-+ function = "i2c";
|
|
|
-+ groups = "i2c_grp_b";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_i2s: i2s-pins {
|
|
|
-+ function = "i2s";
|
|
|
-+ groups = "i2s_grp";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_nand_ctrl: nand_ctrl-pins {
|
|
|
-+ function = "nand_ctrl";
|
|
|
-+ groups = "nand_ctrl_grp";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_nand_data: nand_data-pins {
|
|
|
-+ function = "nand_data";
|
|
|
-+ groups = "nand_data_grp";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_emmc_ctrl: emmc_ctrl-pins {
|
|
|
-+ function = "emmc_ctrl";
|
|
|
-+ groups = "emmc_ctrl_grp";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_usb0_pwr: usb0_pwr-pins {
|
|
|
-+ function = "usb0_pwr";
|
|
|
-+ groups = "usb0_pwr_grp";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ pins_usb1_pwr: usb1_pwr-pins {
|
|
|
-+ function = "usb1_pwr";
|
|
|
-+ groups = "usb1_pwr_grp";
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ uart0: serial@640 {
|
|
|
-+ compatible = "brcm,bcm6345-uart";
|
|
|
-+ reg = <0x640 0x18>;
|
|
|
-+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-+ clocks = <&periph_clk>;
|
|
|
-+ clock-names = "refclk";
|
|
|
-+ status = "okay";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ leds: leds@800 {
|
|
|
-+ compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
|
|
|
-+ reg = <0x800 0xdc>;
|
|
|
-+
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <0>;
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ nand-controller@1800 {
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <0>;
|
|
|
-+ compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
|
|
|
-+ reg = <0x1800 0x600>, <0x2000 0x10>;
|
|
|
-+ reg-names = "nand", "nand-int-base";
|
|
|
-+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
-+ interrupt-names = "nand";
|
|
|
-+ status = "okay";
|
|
|
-+
|
|
|
-+ nandcs: nand@0 {
|
|
|
-+ compatible = "brcm,nandcs";
|
|
|
-+ reg = <0>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ i2c@2100 {
|
|
|
-+ compatible = "brcm,brcmper-i2c";
|
|
|
-+ reg = <0x2100 0x58>;
|
|
|
-+ clock-frequency = <97500>;
|
|
|
-+ pinctrl-names = "default";
|
|
|
-+ pinctrl-0 = <&pins_i2c_a>;
|
|
|
-+ status = "disabled";
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ misc@2600 {
|
|
|
-+ compatible = "brcm,misc", "simple-mfd";
|
|
|
-+ reg = <0x2600 0xe4>;
|
|
|
-+
|
|
|
-+ #address-cells = <1>;
|
|
|
-+ #size-cells = <1>;
|
|
|
-+ ranges = <0x00 0x2600 0xe4>;
|
|
|
-+
|
|
|
-+ reset-controller@2644 {
|
|
|
-+ compatible = "brcm,bcm4908-misc-pcie-reset";
|
|
|
-+ reg = <0x44 0x04>;
|
|
|
-+ #reset-cells = <1>;
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+ };
|
|
|
-+
|
|
|
-+ reboot {
|
|
|
-+ compatible = "syscon-reboot";
|
|
|
-+ regmap = <&twd>;
|
|
|
-+ offset = <0x34>;
|
|
|
-+ mask = <1>;
|
|
|
-+ };
|
|
|
-+};
|
John Audia