ipq40xx: remove model name from LED labels

Like in the previous patches for ath79 and ramips, this will remove
the "devicename" from LED labels in ipq40xx.

The devicename is removed in DTS files and 01_leds, and a migration
script is added. While at it, also harmonize capitalization of
wlan2G/wlan5G vs. wlan2g/wlan5g.

Signed-off-by: Adrian Schmutzler <[email protected]>

target/linux/ipq40xx/base-files/etc/board.d/01_leds

@@ -8,68 +8,64 @@
 board_config_update
 
 board=$(board_name)
-boardname="${board##*,}"
 
 case "$board" in
 alfa-network,ap120c-ac)
-	ucidef_set_led_netdev "wan" "WAN" "${boardname}:amber:wan" "eth1"
+	ucidef_set_led_netdev "wan" "WAN" "amber:wan" "eth1"
 	;;
 asus,rt-ac58u)
-	ucidef_set_led_netdev "wan" "WAN" "${boardname}:blue:wan" "eth1"
-	ucidef_set_led_switch "lan" "LAN" "${boardname}:blue:lan" "switch0" "0x1e"
+	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
+	ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x1e"
 	;;
 avm,fritzbox-4040)
-	ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt"
-	ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1"
-	ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e"
+	ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" "phy1tpt"
+	ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
+	ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x1e"
 	;;
 avm,fritzbox-7530 |\
 glinet,gl-b1300)
-	ucidef_set_led_wlan "wlan" "WLAN" "${boardname}:green:wlan" "phy0tpt"
+	ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
+	;;
+edgecore,ecw5211 |\
+zyxel,nbg6617 |\
+zyxel,wre6606)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
 	;;
 edgecore,oap100)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2g" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:blue:wlan5g" "phy1tpt"
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
 	;;
 engenius,eap1300)
-	ucidef_set_led_netdev "lan" "LAN" "${boardname}:blue:lan" "eth0"
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2g" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:yellow:wlan5g" "phy1tpt"
-	ucidef_set_led_default "mesh" "MESH" "${boardname}:blue:mesh" "0"
+	ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "yellow:wlan5g" "phy1tpt"
+	ucidef_set_led_default "mesh" "MESH" "blue:mesh" "0"
 	;;
 engenius,eap2200)
-	ucidef_set_led_netdev "lan1" "LAN1" "${boardname}:blue:lan1" "eth0"
-	ucidef_set_led_netdev "lan2" "LAN2" "${boardname}:blue:lan2" "eth1"
+	ucidef_set_led_netdev "lan1" "LAN1" "blue:lan1" "eth0"
+	ucidef_set_led_netdev "lan2" "LAN2" "blue:lan2" "eth1"
 	;;
 engenius,ens620ext)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2G" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5G" "phy1tpt"
-	ucidef_set_led_netdev "lan1" "LAN1" "${boardname}:green:lan1" "eth0"
-	ucidef_set_led_netdev "lan2" "LAN2" "${boardname}:green:lan2" "eth1"
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
+	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
+	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
 	;;
 mobipromo,cm520-79f)
-	ucidef_set_led_netdev "wan" "WAN" "${boardname}:blue:wan" "eth1"
-	ucidef_set_led_switch "lan1" "LAN1" "${boardname}:blue:lan1" "switch0" "0x10"
-	ucidef_set_led_switch "lan2" "LAN2" "${boardname}:blue:lan2" "switch0" "0x08"
+	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
+	ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x10"
+	ucidef_set_led_switch "lan2" "LAN2" "blue:lan2" "switch0" "0x08"
 	;;
 netgear,ex6100v2 |\
 netgear,ex6150v2)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "ex61x0v2:green:router" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "ex61x0v2:green:client" "phy1tpt"
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:router" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:client" "phy1tpt"
 	;;
 qxwlan,e2600ac-c1 |\
 qxwlan,e2600ac-c2)
-	ucidef_set_led_wlan "wlan2g" "WLAN0" "e2600ac:green:wlan0" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN1" "e2600ac:green:wlan1" "phy1tpt"
-	;;
-zyxel,nbg6617)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2G" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5G" "phy1tpt"
-	;;
-edgecore,ecw5211 |\
-zyxel,wre6606)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2g" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5g" "phy1tpt"
+	ucidef_set_led_wlan "wlan2g" "WLAN0" "green:wlan0" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN1" "green:wlan1" "phy1tpt"
 	;;
 esac
 

target/linux/ipq40xx/base-files/etc/uci-defaults/04_led_migration

@@ -0,0 +1,19 @@
+. /lib/functions/migrations.sh
+
+board=$(board_name)
+
+case "$board" in
+engenius,emr3500)
+	migrate_leds "emr3500:="
+	;;
+engenius,ens620ext|\
+zyxel,nbg6617)
+	migrate_leds ":wlan2G=:wlan2g" ":wlan5G=:wlan5g"
+	;;
+esac
+
+remove_devicename_leds
+
+migrations_apply system
+
+exit 0

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts

@@ -105,18 +105,18 @@
 		compatible = "gpio-leds";
 
 		red {
-			label = "a42:red:status";
+			label = "red:status";
 			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-off";
 		};
 
 		power: green {
-			label = "a42:green:status";
+			label = "green:status";
 			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
 		};
 
 		blue {
-			label = "a42:blue:status";
+			label = "blue:status";
 			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-off";
 		};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts

@@ -30,24 +30,24 @@
 		compatible = "gpio-leds";
 
 		status: status {
-			label = "ap120c-ac:blue:status";
+			label = "blue:status";
 			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
 
 		wan {
-			label = "ap120c-ac:amber:wan";
+			label = "amber:wan";
 			gpios = <&qca8075 19 GPIO_ACTIVE_HIGH>;
 		};
 
 		wlan2g {
-			label = "ap120c-ac:green:wlan2g";
+			label = "green:wlan2g";
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tpt";
 		};
 
 		wlan5g {
-			label = "ap120c-ac:red:wlan5g";
+			label = "red:wlan5g";
 			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy1tpt";
 		};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts

@@ -78,17 +78,17 @@
 		compatible = "gpio-leds";
 
 		led_status_red: status_red {
-			label = "cs-w3-wd1200g-eup:red:status";
+			label = "red:status";
 			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
 		};
 
 		led_status_green: status_green {
-			label = "cs-w3-wd1200g-eup:green:status";
+			label = "green:status";
 			gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
 		};
 
 		led_status_blue: status_blue {
-			label = "cs-w3-wd1200g-eup:blue:status";
+			label = "blue:status";
 			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts

@@ -67,12 +67,12 @@
 		compatible = "gpio-leds";
 
 		led_red: red {
-			label = "dap-2610:red:power";
+			label = "red:power";
 			gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
 		};
 
 		led_green: green {
-			label = "dap-2610:green:power";
+			label = "green:power";
 			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts

@@ -98,7 +98,7 @@
 		compatible = "gpio-leds";
 
 		power: status {
-			label = "EA6350v3:green:status";
+			label = "green:status";
 			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts

@@ -78,27 +78,27 @@
 		compatible = "gpio-leds";
 
 		power: orange {
-			label = "eap1300:orange:power";
+			label = "orange:power";
 			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 		};
 
 		lan {
-			label = "eap1300:blue:lan";
+			label = "blue:lan";
 			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 		};
 
 		mesh {
-			label = "eap1300:blue:mesh";
+			label = "blue:mesh";
 			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
 		};
 
 		wlan2g {
-			label = "eap1300:blue:wlan2g";
+			label = "blue:wlan2g";
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 		};
 
 		wlan5g {
-			label = "eap1300:yellow:wlan5g";
+			label = "yellow:wlan5g";
 			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts

@@ -32,17 +32,17 @@
 		compatible = "gpio-leds";
 
 		led_power: power {
-			label = "ecw5211:yellow:power";
+			label = "yellow:power";
 			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
 		};
 
 		wlan2g {
-			label = "ecw5211:green:wlan2g";
+			label = "green:wlan2g";
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 		};
 
 		wlan5g {
-			label = "ecw5211:green:wlan5g";
+			label = "green:wlan5g";
 			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts

@@ -81,24 +81,24 @@
 		compatible = "gpio-leds";
 
 		led_power: power {
-			label = "emd1:white:power";
+			label = "white:power";
 			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 		};
 
 		wlan2g {
-			label = "emd1:red:wlan2g";
+			label = "red:wlan2g";
 			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tpt";
 		};
 
 		wlan5g {
-			label = "emd1:blue:wlan5g";
+			label = "blue:wlan5g";
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy1tpt";
 		};
 
 		mesh {
-			label = "emd1:orange:mesh";
+			label = "orange:mesh";
 			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts

@@ -82,22 +82,22 @@
 		compatible = "gpio-leds";
 
 		power: white {
-			label = "emr3500:white:power";
+			label = "white:power";
 			gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
 		};
 
 		blue {
-			label = "emr3500:blue";
+			label = "blue";
 			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 		};
 
 		red {
-			label = "emr3500:red";
+			label = "red";
 			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
 		};
 
 		orange {
-			label = "emr3500:orange";
+			label = "orange";
 			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts

@@ -92,27 +92,27 @@
 		compatible = "gpio-leds";
 
 		power: power {
-			label = "ens620ext:amber:power";
+			label = "amber:power";
 			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 		};
 
 		lan1 {
-			label = "ens620ext:green:lan1";
+			label = "green:lan1";
 			gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
 		};
 
 		lan2 {
-			label = "ens620ext:green:lan2";
+			label = "green:lan2";
 			gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
 		};
 
-		wlan2G {
-			label = "ens620ext:green:wlan2G";
+		wlan2g {
+			label = "green:wlan2g";
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 		};
 
-		wlan5G {
-			label = "ens620ext:green:wlan5G";
+		wlan5g {
+			label = "green:wlan5g";
 			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi

@@ -120,47 +120,47 @@
 		compatible = "gpio-leds";
 
 		power_amber: power_amber {
-			label = "ex61x0v2:amber:power";
+			label = "amber:power";
 			gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
 		};
 
 		power_green: power_green {
-			label = "ex61x0v2:green:power";
+			label = "green:power";
 			gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
 		};
 
 		right {
-			label = "ex61x0v2:blue:right";
+			label = "blue:right";
 			gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
 		};
 
 		left {
-			label = "ex61x0v2:blue:left";
+			label = "blue:left";
 			gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
 		};
 
 		client_green {
-			label = "ex61x0v2:green:client";
+			label = "green:client";
 			gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
 		};
 
 		client_red {
-			label = "ex61x0v2:red:client";
+			label = "red:client";
 			gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
 		};
 
 		router_green {
-			label = "ex61x0v2:green:router";
+			label = "green:router";
 			gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
 		};
 
 		router_red {
-			label = "ex61x0v2:red:router";
+			label = "red:router";
 			gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
 		};
 
 		wps {
-			label = "ex61x0v2:green:wps";
+			label = "green:wps";
 			gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts

@@ -109,33 +109,33 @@
 		compatible = "gpio-leds";
 
 		wlan {
-			label = "fritz4040:green:wlan";
+			label = "green:wlan";
 			gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
 		};
 
 		panic: info_red {
-			label = "fritz4040:red:info";
+			label = "red:info";
 			gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
 			panic-indicator;
 		};
 
 		wan {
-			label = "fritz4040:green:wan";
+			label = "green:wan";
 			gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
 		};
 
 		power: power {
-			label = "fritz4040:green:power";
+			label = "green:power";
 			gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
 		};
 
 		lan {
-			label = "fritz4040:green:lan";
+			label = "green:lan";
 			gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
 		};
 
 		flash: info_amber {
-			label = "fritz4040:amber:info";
+			label = "amber:info";
 			gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts

@@ -74,7 +74,7 @@
 		compatible = "gpio-leds";
 
 		led_status: status {
-			label = "meshpoint-one:blue:status";
+			label = "blue:status";
 			gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts

@@ -142,29 +142,29 @@
 		pinctrl-names = "default";
 
 		power: power {
-			label = "nbg6617:green:power";
+			label = "green:power";
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 		};
 
 		usb {
-			label = "nbg6617:green:usb";
+			label = "green:usb";
 			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		wlan2G {
-			label = "nbg6617:green:wlan2G";
+		wlan2g {
+			label = "green:wlan2g";
 			gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
 		};
 
-		wlan5G {
-			label = "nbg6617:green:wlan5G";
+		wlan5g {
+			label = "green:wlan5g";
 			gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
 		};
 
 		wps {
-			label = "nbg6617:green:wps";
+			label = "green:wps";
 			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts

@@ -118,36 +118,36 @@
 		compatible = "gpio-leds";
 
 		led_power: status {
-			label = "rt-ac58u:blue:status";
+			label = "blue:status";
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 		};
 
 		wan {
-			label = "rt-ac58u:blue:wan";
+			label = "blue:wan";
 			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
 		};
 
 		wlan2G {
-			label = "rt-ac58u:blue:wlan2G";
+			label = "blue:wlan2G";
 			gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tpt";
 		};
 
 		wlan5G {
-			label = "rt-ac58u:blue:wlan5G";
+			label = "blue:wlan5G";
 			gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy1tpt";
 		};
 
 		usb {
-			label = "rt-ac58u:blue:usb";
+			label = "blue:usb";
 			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&usb3_port1>, <&usb3_port2>;
 			linux,default-trigger = "usbport";
 		};
 
 		lan {
-			label = "rt-ac58u:blue:lan";
+			label = "blue:lan";
 			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts

@@ -88,32 +88,32 @@
 		compatible = "gpio-leds";
 
 		wps {
-			label = "wre6606:green:wps";
+			label = "green:wps";
 			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
 		};
 
 		wlan5g_green {
-			label = "wre6606:green:wlan5g";
+			label = "green:wlan5g";
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 		};
 
 		power: power {
-			label = "wre6606:green:power";
+			label = "green:power";
 			gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
 		};
 
 		wlan5g_red {
-			label = "wre6606:red:wlan5g";
+			label = "red:wlan5g";
 			gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
 		};
 
 		wlan2g_red {
-			label = "wre6606:red:wlan2g";
+			label = "red:wlan2g";
 			gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
 		};
 
 		wlan2g_green {
-			label = "wre6606:green:wlan2g";
+			label = "green:wlan2g";
 			gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts

@@ -108,18 +108,18 @@
 		compatible = "gpio-leds";
 
 		red {
-			label = "a62:red:status";
+			label = "red:status";
 			gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-off";
 		};
 
 		power: green {
-			label = "a62:green:status";
+			label = "green:status";
 			gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
 		};
 
 		blue {
-			label = "a62:blue:status";
+			label = "blue:status";
 			gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-off";
 		};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts

@@ -130,40 +130,40 @@
 		compatible = "gpio-leds";
 
 		usb {
-			label = "cm520-79f:blue:usb";
+			label = "blue:usb";
 			gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "usbport";
 			trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>;
 		};
 
 		led_sys: can {
-			label = "cm520-79f:blue:can";
+			label = "blue:can";
 			gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
 		};
 
 		wan {
-			label = "cm520-79f:blue:wan";
+			label = "blue:wan";
 			gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
 		};
 
 		lan1 {
-			label = "cm520-79f:blue:lan1";
+			label = "blue:lan1";
 			gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
 		};
 
 		lan2 {
-			label = "cm520-79f:blue:lan2";
+			label = "blue:lan2";
 			gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
 		};
 
 		wlan2g {
-			label = "cm520-79f:blue:wlan2g";
+			label = "blue:wlan2g";
 			gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "phy0tpt";
 		};
 
 		wlan5g {
-			label = "cm520-79f:blue:wlan5g";
+			label = "blue:wlan5g";
 			gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "phy1tpt";
 		};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi

@@ -132,34 +132,34 @@
 			compatible = "gpio-leds";
 
 			led1 {
-				label = "e2600ac:green:wlan0";
+				label = "green:wlan0";
 				gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
 			};
 
 			led2 {
-				label = "e2600ac:green:wlan1";
+				label = "green:wlan1";
 				gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
 			};
 
 			led3 {
-				label = "e2600ac:green:usb";
+				label = "green:usb";
 				gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
 				trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
 				linux,default-trigger = "usbport";
 			};
 
 			led4 {
-				label = "e2600ac:green:ctrl1";
+				label = "green:ctrl1";
 				gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
 			};
 
 			led5 {
-				label = "e2600ac:green:ctrl2";
+				label = "green:ctrl2";
 				gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
 			};
 
 			led6 {
-				label = "e2600ac:green:ctrl3";
+				label = "green:ctrl3";
 				gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
 			};
 		};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts

@@ -24,35 +24,35 @@
 		// Front panel LEDs, top to bottom
 
 		led_plug: diag {
-			label = "ea8300:amber:plug";
+			label = "amber:plug";
 			gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_world: internet {
-			label = "ea8300:amber:world";
+			label = "amber:world";
 			gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_wps: wps {
-			label = "ea8300:white:wps";
+			label = "white:wps";
 			gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_wps_amber: wps_amber {
-			label = "ea8300:amber:wps";
+			label = "amber:wps";
 			gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
 			panic-indicator;
 		};
 
 		led_linksys: pwr {
-			label = "ea8300:white:linksys";
+			label = "white:linksys";
 			gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
 		};
 
 		// On back panel, above USB socket
 
 		led_usb: usb {
-			label = "ea8300:green:usb";
+			label = "green:usb";
 			gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&usb3_port1>, <&usb3_port2>,
 					  <&usb2_port1>;

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts

@@ -29,40 +29,40 @@
 		compatible = "gpio-leds";
 
 		led_power: power {
-			label = "eap2200:amber:power";
+			label = "amber:power";
 			gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
 		};
 
 		lan1 {
-			label = "eap2200:blue:lan1";
+			label = "blue:lan1";
 			gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
 		};
 
 		lan2 {
-			label = "eap2200:blue:lan2";
+			label = "blue:lan2";
 			gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
 		};
 
 		wlan2g {
-			label = "eap2200:blue:wlan2g";
+			label = "blue:wlan2g";
 			gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "phy0tpt";
 		};
 
 		wlan5g {
-			label = "eap2200:yellow:wlan5g";
+			label = "yellow:wlan5g";
 			gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "phy1tpt";
 		};
 
 		wlan5g2 {
-			label = "eap2200:yellow:wlan5g2";
+			label = "yellow:wlan5g2";
 			gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "phy2tpt";
 		};
 
 		mode {
-			label = "eap2200:blue:mode";
+			label = "blue:mode";
 			gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts

@@ -101,32 +101,32 @@
 		compatible = "gpio-leds";
 
 		info_red: info_red {
-			label = "fritzbox-7530:red:info";
+			label = "red:info";
 			gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
 		};
 
 		info_green: info {
-			label = "fritzbox-7530:green:info";
+			label = "green:info";
 			gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
 		};
 
 		wlan {
-			label = "fritzbox-7530:green:wlan";
+			label = "green:wlan";
 			gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
 		};
 
 		fon {
-			label = "fritzbox-7530:green:fon";
+			label = "green:fon";
 			gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 		};
 
 		power_green: power {
-			label = "fritzbox-7530:green:power";
+			label = "green:power";
 			gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
 		};
 
 		wps {
-			label = "fritzbox-7530:green:wps";
+			label = "green:wps";
 			gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts

@@ -82,17 +82,17 @@
 		compatible = "gpio-leds";
 
 		power_red: power_red {
-			label = "fritzwlan-1200:red:power";
+			label = "red:power";
 			gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
 		};
 
 		power_green: power_green {
-			label = "fritzwlan-1200:green:power";
+			label = "green:power";
 			gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
 		};
 
 		power_yellow {
-			label = "fritzwlan-1200:yellow:power";
+			label = "yellow:power";
 			gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts

@@ -82,22 +82,22 @@
 		compatible = "gpio-leds";
 
 		connect_red {
-			label = "fritzwlan-3000:red:connect";
+			label = "red:connect";
 			gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
 		};
 
 		connect_green {
-			label = "fritzwlan-3000:green:connect";
+			label = "green:connect";
 			gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
 		};
 
 		connect_blue {
-			label = "fritzwlan-3000:blue:connect";
+			label = "blue:connect";
 			gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
 		};
 
 		power_led: power {
-			label = "fritzwlan-3000:green:power";
+			label = "green:power";
 			gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts

@@ -103,24 +103,24 @@
 		compatible = "gpio-leds";
 
 		led_status: status {
-			label = "habanero-dvk:green:status";
+			label = "green:status";
 			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 			panic-indicator;
 		};
 
 		led_upgrade: upgrade {
-			label = "habanero-dvk:green:upgrade";
+			label = "green:upgrade";
 			gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
 		};
 
 		wlan2g {
-			label = "habanero-dvk:green:wlan2g";
+			label = "green:wlan2g";
 			gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tpt";
 		};
 
 		wlan5g {
-			label = "habanero-dvk:green:wlan5g";
+			label = "green:wlan5g";
 			gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy1tpt";
 		};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts

@@ -240,63 +240,63 @@
 
 		led_blue0: blue0 {
 			chan-name = "blue0";
-			label = "map-ac2200:blue:chan0";
+			label = "blue:chan0";
 			led-cur = [fa];
 			max-cur = [ff];
 		};
 
 		blue1 {
 			chan-name = "blue1";
-			label = "map-ac2200:blue:chan1";
+			label = "blue:chan1";
 			led-cur = [fa];
 			max-cur = [ff];
 		};
 
 		blue2 {
 			chan-name = "blue2";
-			label = "map-ac2200:blue:chan2";
+			label = "blue:chan2";
 			led-cur = [fa];
 			max-cur = [ff];
 		};
 
 		led_green0: green0 {
 			chan-name = "green0";
-			label = "map-ac2200:green:chan0";
+			label = "green:chan0";
 			led-cur = [fa];
 			max-cur = [ff];
 		};
 
 		green1 {
 			chan-name = "green1";
-			label = "map-ac2200:green:chan1";
+			label = "green:chan1";
 			led-cur = [fa];
 			max-cur = [ff];
 		};
 
 		green2 {
 			chan-name = "green2";
-			label = "map-ac2200:green:chan2";
+			label = "green:chan2";
 			led-cur = [fa];
 			max-cur = [ff];
 		};
 
 		led_red0: red0 {
 			chan-name = "red0";
-			label = "map-ac2200:red:chan0";
+			label = "red:chan0";
 			led-cur = [fa];
 			max-cur = [ff];
 		};
 
 		red1 {
 			chan-name = "red1";
-			label = "map-ac2200:red:chan1";
+			label = "red:chan1";
 			led-cur = [fa];
 			max-cur = [ff];
 		};
 
 		red2 {
 			chan-name = "red2";
-			label = "map-ac2200:red:chan2";
+			label = "red:chan2";
 			led-cur = [fa];
 			max-cur = [ff];
 		};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mr8300.dts

@@ -19,25 +19,25 @@
 		compatible = "gpio-leds";
 
 		led_red: red {
-			label = "mr8300:red:alarm";
+			label = "red:alarm";
 			gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_amber: amber {
-			label = "mr8300:amber:programming";
+			label = "amber:programming";
 			gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
 			panic-indicator;
 		};
 
 		led_blue: blue {
-			label = "mr8300:blue:power";
+			label = "blue:power";
 			gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
 		};
 
 		// On back panel, above USB socket
 
 		led_usb: usb {
-			label = "mr8300:green:usb";
+			label = "green:usb";
 			gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&usb3_port1>, <&usb3_port2>,
 					  <&usb2_port1>;

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts

@@ -125,17 +125,17 @@
 		compatible = "gpio-leds";
 
 		led_system: led_system {
-			label = "oap100:green:system";
+			label = "green:system";
 			gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_2g {
-			label = "oap100:blue:wlan2g";
+			label = "blue:wlan2g";
 			gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_5g {
-			label = "oap100:blue:wlan5g";
+			label = "blue:wlan5g";
 			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts

@@ -48,72 +48,72 @@
 
 		led_power_blue: power_blue {
 			gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:power";
+			label = "blue:power";
 			default-state = "on";
 		};
 
 		led_power_red: power_red {
 			gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:red:power";
+			label = "red:power";
 		};
 
 		tp28 {
 			gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
-			label = "rtl30vw:ext:tp28";
+			label = "ext:tp28";
 			default-state = "keep";
 		};
 
 		tp27 {
 			gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
-			label = "rtl30vw:ext:tp27";
+			label = "ext:tp27";
 			default-state = "keep";
 		};
 
 		wlan2g {
 			gpios = <&led_gpio 8 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:wlan2g";
+			label = "blue:wlan2g";
 			linux,default-trigger = "phy0tpt";
 		};
 
 		wlan5g {
 			gpios = <&led_gpio 9 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:wlan5g";
+			label = "blue:wlan5g";
 			linux,default-trigger = "phy1tpt";
 		};
 
 		wps {
 			gpios = <&led_gpio 10 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:wps";
+			label = "blue:wps";
 		};
 
 		voip {
 			gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:voip";
+			label = "blue:voip";
 		};
 
 		s1 {
 			gpios = <&led_gpio 12 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:s1";
+			label = "blue:s1";
 		};
 
 		s2 {
 			gpios = <&led_gpio 13 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:s2";
+			label = "blue:s2";
 		};
 
 		s3 {
 			gpios = <&led_gpio 14 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:s3";
+			label = "blue:s3";
 		};
 
 		s4 {
 			gpios = <&led_gpio 15 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:s4";
+			label = "blue:s4";
 		};
 
 		signal {
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:red:signal";
+			label = "red:signal";
 		};
 	};
 

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi

@@ -110,7 +110,7 @@
 			pinctrl-names = "default";
 
 			led_status: led2 {
-				label = "u4019:green:led2";
+				label = "green:led2";
 				gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
 			};
 		};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts

@@ -95,47 +95,47 @@
 		compatible = "gpio-leds";
 
 		led_power_white: power_white {
-			label = "wtr-m2133hp:white:power";
+			label = "white:power";
 			gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_power_orange: power_orange {
-			label = "wtr-m2133hp:orange:power";
+			label = "orange:power";
 			gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_power_blue: power_blue {
-			label = "wtr-m2133hp:blue:power";
+			label = "blue:power";
 			gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
 		};
 
 		router_white {
-			label = "wtr-m2133hp:white:router";
+			label = "white:router";
 			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
 		};
 
 		router_orange {
-			label = "wtr-m2133hp:orange:router";
+			label = "orange:router";
 			gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
 		};
 
 		internet_white {
-			label = "wtr-m2133hp:white:internet";
+			label = "white:internet";
 			gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
 		};
 
 		internet_orange {
-			label = "wtr-m2133hp:orange:internet";
+			label = "orange:internet";
 			gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
 		};
 
 		wireless_white {
-			label = "wtr-m2133hp:white:wireless";
+			label = "white:wireless";
 			gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
 		};
 
 		wireless_orange {
-			label = "wtr-m2133hp:orange:wireless";
+			label = "orange:wireless";
 			gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts

@@ -116,12 +116,12 @@
 		compatible = "gpio-leds";
 
 		status: rss4 {
-			label = "wpj428:green:rss4";
+			label = "green:rss4";
 			gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
 		};
 
 		rss3 {
-			label = "wpj428:green:rss3";
+			label = "green:rss3";
 			gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts

@@ -18,24 +18,24 @@
 		compatible = "gpio-leds";
 
 		wifi_green {
-			label = "ap-303:green:wifi";
+			label = "green:wifi";
 			gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tpt";
 		};
 
 		wifi_amber {
-			label = "ap-303:amber:wifi";
+			label = "amber:wifi";
 			gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy1tpt";
 		};
 
 		led_system_red: system_red {
-			label = "ap-303:red:system";
+			label = "red:system";
 			gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_system_green: system_green {
-			label = "ap-303:green:system";
+			label = "green:system";
 			gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts

@@ -108,34 +108,34 @@
 		compatible = "gpio-leds";
 
 		wifi_green {
-			label = "ap-303h:green:wifi";
+			label = "green:wifi";
 			gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tpt";
 		};
 
 		wifi_amber {
-			label = "ap-303h:amber:wifi";
+			label = "amber:wifi";
 			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy1tpt";
 		};
 
 		pse {
-			label = "ap-303h:green:pse";
+			label = "green:pse";
 			gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_system_red: system_red {
-			label = "ap-303h:red:system";
+			label = "red:system";
 			gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_system_green: system_green {
-			label = "ap-303h:green:system";
+			label = "green:system";
 			gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_system_amber: system_amber {
-			label = "ap-303h:amber:system";
+			label = "amber:system";
 			gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts

@@ -18,17 +18,17 @@
 		compatible = "gpio-leds";
 
 		led_system_red: system_red {
-			label = "ap-365:red:system";
+			label = "red:system";
 			gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
 		};
 
 		led_system_green: system_green {
-			label = "ap-365:green:system";
+			label = "green:system";
 			gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
 		};
 
 		system_amber {
-			label = "ap-365:amber:system";
+			label = "amber:system";
 			gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts

@@ -121,18 +121,18 @@
 		compatible = "gpio-leds";
 
 		power: power {
-			label = "gl-b1300:green:power";
+			label = "green:power";
 			gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
 		mesh {
-			label = "gl-b1300:green:mesh";
+			label = "green:mesh";
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 		};
 
 		wlan {
-			label = "gl-b1300:green:wlan";
+			label = "green:wlan";
 			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 		};
 	};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts

@@ -107,18 +107,18 @@
 		compatible = "gpio-leds";
 
 		led_power: power {
-			label = "gl-s1300:green:power";
+			label = "green:power";
 			gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
 		mesh {
-			label = "gl-s1300:green:mesh";
+			label = "green:mesh";
 			gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>;
 		};
 
 		wlan {
-			label = "gl-s1300:green:wlan";
+			label = "green:wlan";
 			gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tpt";
 		};

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts

@@ -117,7 +117,7 @@
 		compatible = "gpio-leds";
 
 		power_orange: power {
-			label = "mr33:orange:power";
+			label = "orange:power";
 			gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
 			panic-indicator;
 		};
@@ -169,25 +169,25 @@
 
 		/* RGB led */
 		status_red: chan0 {
-			chan-name = "mr33:red:status";
+			chan-name = "red:status";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 		};
 
 		status_green: chan1 {
-			chan-name = "mr33:green:status";
+			chan-name = "green:status";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 		};
 
 		chan2 {
-			chan-name = "mr33:blue:status";
+			chan-name = "blue:status";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 		};
 
 		chan3 {
-			chan-name = "mr33:white:status";
+			chan-name = "white:status";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 		};