ipq806x: split files dir to 5.10 and 5.15

In preparation for a cleanup of 5.15 patches copy the files dir to 5.10
and 5.15 kernel version.

Signed-off-by: Christian Marangi <[email protected]>

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts

@@ -0,0 +1,479 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8062.dtsi"
+#include <dt-bindings/input/input.h>
+
+/delete-node/ &nand_pins;
+
+/ {
+	model = "NEC Platforms Aterm WG2600HP3";
+	compatible = "nec,wg2600hp3", "qcom,ipq8062", "qcom,ipq8064";
+
+	memory {
+		device_type = "memory";
+		reg =  <0x42000000 0x1e000000>;
+	};
+
+	aliases {
+		label-mac-device = &gmac2;
+
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_red;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_red;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&buttons_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		mode0 {
+			label = "mode0";
+			gpios = <&qcom_pinmux 40 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		mode1 {
+			label = "mode1";
+			gpios = <&qcom_pinmux 41 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_1>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led_power_green: power_green {
+			label = "green:power";
+			gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_power_red: power_red {
+			label = "red:power";
+			gpios = <&qcom_pinmux 35 GPIO_ACTIVE_HIGH>;
+		};
+
+		active_green {
+			label = "green:active";
+			gpios = <&qcom_pinmux 42 GPIO_ACTIVE_HIGH>;
+		};
+
+		active_red {
+			label = "red:active";
+			gpios = <&qcom_pinmux 38 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2g_green {
+			label = "green:wlan2g";
+			gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		wlan2g_red {
+			label = "red:wlan2g";
+			gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan5g_green {
+			label = "green:wlan5g";
+			gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		wlan5g_red {
+			label = "red:wlan5g";
+			gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
+		};
+
+		tv_green {
+			label = "green:tv";
+			gpios = <&qcom_pinmux 46 GPIO_ACTIVE_HIGH>;
+		};
+
+		tv_red {
+			label = "red:tv";
+			gpios = <&qcom_pinmux 36 GPIO_ACTIVE_HIGH>;
+		};
+
+		converter_green {
+			label = "green:converter";
+			gpios = <&qcom_pinmux 43 GPIO_ACTIVE_HIGH>;
+		};
+
+		converter_red {
+			label = "red:converter";
+			gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&qcom_pinmux {
+	pinctrl-0 = <&akro_pins>;
+	pinctrl-names = "default";
+
+	spi_pins: spi_pins {
+		mux {
+			pins = "gpio18", "gpio19", "gpio21";
+			function = "gsbi5";
+			bias-pull-down;
+		};
+
+		data {
+			pins = "gpio18", "gpio19";
+			drive-strength = <10>;
+		};
+
+		cs {
+			pins = "gpio20";
+			drive-strength = <10>;
+		};
+
+		clk {
+			pins = "gpio21";
+			drive-strength = <12>;
+		};
+	};
+
+	buttons_pins: buttons_pins {
+		mux {
+			pins = "gpio22", "gpio24", "gpio40",
+				"gpio41";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		mux {
+			pins = "gpio14", "gpio15", "gpio35",
+				"gpio36", "gpio38", "gpio42",
+				"gpio43", "gpio46", "gpio55",
+				"gpio56", "gpio57", "gpio58";
+			function = "gpio";
+			bias-pull-down;
+		};
+
+		akro2 {
+			pins = "gpio15", "gpio35", "gpio38",
+				"gpio42", "gpio43", "gpio46",
+				"gpio55", "gpio56", "gpio57",
+				"gpio58";
+			drive-strength = <2>;
+		};
+
+		akro4 {
+			pins = "gpio14", "gpio36";
+			drive-strength = <4>;
+		};
+	};
+
+	/*
+	 * Stock firmware has the following settings, so let's do the same.
+	 * I don't sure why these are required.
+	 */
+	akro_pins: akro_pinmux {
+		akro {
+			pins = "gpio17", "gpio26", "gpio47";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		reset {
+			pins = "gpio45";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+			output-low;
+		};
+
+		gmac0_rgmii {
+			pins = "gpio25";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+};
+
+&gsbi5 {
+	status = "okay";
+	qcom,mode = <GSBI_PROT_SPI>;
+
+	spi@1a280000 {
+		status = "okay";
+
+		pinctrl-0 = <&spi_pins>;
+		pinctrl-names = "default";
+
+		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+		flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+			m25p,fast-read;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "SBL1";
+					reg = <0x0000000 0x0020000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "MIBIB";
+					reg = <0x0020000 0x0020000>;
+					read-only;
+				};
+
+				partition@40000 {
+					label = "SBL2";
+					reg = <0x0040000 0x0040000>;
+					read-only;
+				};
+
+				partition@80000 {
+					label = "SBL3";
+					reg = <0x0080000 0x0080000>;
+					read-only;
+				};
+
+				partition@100000 {
+					label = "DDRCONFIG";
+					reg = <0x0100000 0x0010000>;
+					read-only;
+				};
+
+				partition@110000 {
+					label = "SSD";
+					reg = <0x0110000 0x0010000>;
+					read-only;
+				};
+
+				partition@120000 {
+					label = "TZ";
+					reg = <0x0120000 0x0080000>;
+					read-only;
+				};
+
+				partition@1a0000 {
+					label = "RPM";
+					reg = <0x01a0000 0x0080000>;
+					read-only;
+				};
+
+				partition@220000 {
+					label = "APPSBL";
+					reg = <0x0220000 0x0080000>;
+					read-only;
+				};
+
+				partition@2a0000 {
+					label = "APPSBLENV";
+					reg = <0x02a0000 0x0010000>;
+					read-only;
+				};
+
+				factory: partition@2b0000 {
+					label = "PRODUCTDATA";
+					reg = <0x02b0000 0x0030000>;
+					read-only;
+				};
+
+				partition@2e0000 {
+					label = "ART";
+					reg = <0x02e0000 0x0040000>;
+					read-only;
+					compatible = "nvmem-cells";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					precal_ART_1000: precal@1000 {
+						reg = <0x1000 0x2f20>;
+					};
+
+					precal_ART_5000: precal@5000 {
+						reg = <0x5000 0x2f20>;
+					};
+				};
+
+				partition@320000 {
+					label = "TP";
+					reg = <0x0320000 0x0040000>;
+					read-only;
+				};
+
+				partition@360000 {
+					label = "TINY";
+					reg = <0x0360000 0x0500000>;
+					read-only;
+				};
+
+				partition@860000 {
+					compatible = "denx,uimage";
+					label = "firmware";
+					reg = <0x0860000 0x17a0000>;
+				};
+			};
+		};
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			compatible = "qcom,ath10k";
+			reg = <0x00010000 0 0 0 0>;
+
+			qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
+
+			nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>;
+			nvmem-cell-names = "mac-address", "pre-calibration";
+		};
+	};
+};
+
+&pcie1 {
+	status = "okay";
+	force_gen1 = <1>;
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			compatible = "qcom,ath10k";
+			reg = <0x00010000 0 0 0 0>;
+
+			ieee80211-freq-limit = <2400000 2483000>;
+			qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
+
+			nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>;
+			nvmem-cell-names = "mac-address", "pre-calibration";
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x04 0x80080080  /* PAD0_MODE */
+			0x0c 0x06000000  /* PAD6_MODE */
+			0x10 0x002613a0  /* PWS_REG */
+			0x50 0xcc36cc36  /* LED_CTRL0 */
+			0x54 0xca36ca36  /* LED_CTRL1 */
+			0x58 0xc936c936  /* LED_CTRL2 */
+			0x5c 0x03ffff00  /* LED_CTRL3 */
+			0x7c 0x0000004e  /* PORT0_STATUS */
+			0x94 0x0000004e  /* PORT6_STATUS */
+			0xe0 0xc74164de  /* SGMII_CTRL */
+			0xe4 0x0006a545  /* MAC_PWR_SEL */
+			>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii";
+	qcom,id = <1>;
+	mdiobus = <&mdio0>;
+	nvmem-cells = <&macaddr_factory_0>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+	mdiobus = <&mdio0>;
+	nvmem-cells = <&macaddr_factory_6>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&factory {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_factory_0: macaddr@0 {
+		reg = <0x0 0x6>;
+	};
+
+	macaddr_factory_6: macaddr@6 {
+		reg = <0x6 0x6>;
+	};
+
+	macaddr_PRODUCTDATA_c: macaddr@c {
+		reg = <0xc 0x6>;
+	};
+
+	macaddr_PRODUCTDATA_12: macaddr@12 {
+		reg = <0x12 0x6>;
+	};
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8062.dtsi

@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "qcom-ipq8064.dtsi"
+
+/ {
+	model = "Qualcomm IPQ8062";
+	compatible = "qcom,ipq8062", "qcom,ipq8064";
+
+	aliases {
+		serial0 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+};
+
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+
+	serial@16340000 {
+		status = "okay";
+	};
+	/*
+	* The i2c device on gsbi4 should not be enabled.
+	* On ipq806x designs gsbi4 i2c is meant for exclusive
+	* RPM usage. Turning this on in kernel manifests as
+	* i2c failure for the RPM.
+	*/
+};
+
+&opp_table0 {
+	/delete-node/opp-1200000000;
+	/delete-node/opp-1400000000;
+
+	/*
+	 * Voltage thresholds are <target min max>
+	 */
+	opp-384000000 {
+		opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
+		opp-microvolt-speed0-pvs1-v0 = < 925000 878750  971250>;
+		opp-microvolt-speed0-pvs2-v0 = < 875000 831250  918750>;
+		opp-microvolt-speed0-pvs3-v0 = < 800000 760000  840000>;
+	};
+
+	opp-600000000 {
+		opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
+		opp-microvolt-speed0-pvs1-v0 = < 975000 926250 1023750>;
+		opp-microvolt-speed0-pvs2-v0 = < 925000 878750  971250>;
+		opp-microvolt-speed0-pvs3-v0 = < 850000 807500  892500>;
+	};
+
+	opp-800000000 {
+		opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
+		opp-microvolt-speed0-pvs1-v0 = <1025000  973750 1076250>;
+		opp-microvolt-speed0-pvs2-v0 = < 995000  945250 1044750>;
+		opp-microvolt-speed0-pvs3-v0 = < 900000  855000  945000>;
+	};
+
+	opp-1000000000 {
+		opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>;
+		opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
+		opp-microvolt-speed0-pvs2-v0 = <1025000  973750 1076250>;
+		opp-microvolt-speed0-pvs3-v0 = < 950000  902500  997500>;
+	};
+};
+
+&pcie0 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie1 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie2 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&smb208_s2a {
+	regulator-max-microvolt = <1150000>;
+};
+
+&smb208_s2b {
+	regulator-max-microvolt = <1150000>;
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi

@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+		label-mac-device = &gmac2;
+	};
+};
+
+&qcom_pinmux {
+	spi_pins: spi_pins {
+		mux {
+			pins = "gpio18", "gpio19", "gpio21";
+			function = "gsbi5";
+			bias-pull-down;
+		};
+
+		data {
+			pins = "gpio18", "gpio19";
+			drive-strength = <10>;
+		};
+
+		cs {
+			pins = "gpio20";
+			function = "gpio";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+
+		clk {
+			pins = "gpio21";
+			drive-strength = <12>;
+		};
+	};
+
+	usb0_pwr_en_pin: usb0_pwr_en_pin {
+		mux {
+			pins = "gpio25";
+			function = "gpio";
+			drive-strength = <10>;
+			bias-pull-up;
+			output-high;
+		};
+	};
+
+	usb1_pwr_en_pin: usb1_pwr_en_pin {
+		mux {
+			pins = "gpio23";
+			function = "gpio";
+			drive-strength = <10>;
+			bias-pull-up;
+			output-high;
+		};
+	};
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_SPI>;
+	status = "okay";
+
+	spi@1a280000 {
+		status = "okay";
+
+		pinctrl-0 = <&spi_pins>;
+		pinctrl-names = "default";
+
+		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+		flash@0 {
+			compatible = "jedec,spi-nor";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			spi-max-frequency = <50000000>;
+			reg = <0>;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "SBL1";
+					reg = <0x0 0x20000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "MIBIB";
+					reg = <0x20000 0x20000>;
+					read-only;
+				};
+
+				partition@40000 {
+					label = "SBL2";
+					reg = <0x40000 0x20000>;
+					read-only;
+				};
+
+				partition@60000 {
+					label = "SBL3";
+					reg = <0x60000 0x30000>;
+					read-only;
+				};
+
+				partition@90000 {
+					label = "DDRCONFIG";
+					reg = <0x90000 0x10000>;
+					read-only;
+				};
+
+				partition@a0000 {
+					label = "SSD";
+					reg = <0xa0000 0x10000>;
+					read-only;
+				};
+
+				partition@b0000 {
+					label = "TZ";
+					reg = <0xb0000 0x30000>;
+					read-only;
+				};
+
+				partition@e0000 {
+					label = "RPM";
+					reg = <0xe0000 0x20000>;
+					read-only;
+				};
+
+				partition@100000 {
+					label = "fs-uboot";
+					reg = <0x100000 0x70000>;
+					read-only;
+				};
+
+				partition@170000 {
+					label = "uboot-env";
+					reg = <0x170000 0x40000>;
+					read-only;
+				};
+
+				partition@1b0000 {
+					label = "radio";
+					reg = <0x1b0000 0x40000>;
+					read-only;
+					compatible = "nvmem-cells";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					precal_radio_1000: precal@1000 {
+						reg = <0x1000 0x2f20>;
+					};
+
+					precal_radio_5000: precal@5000 {
+						reg = <0x5000 0x2f20>;
+					};
+				};
+
+				partition@1f0000 {
+					label = "os-image";
+					reg = <0x1f0000 0x400000>;
+				};
+
+				partition@5f0000 {
+					label = "rootfs";
+					reg = <0x5f0000 0x1900000>;
+				};
+
+				defaultmac: partition@1ef0000 {
+					label = "default-mac";
+					reg = <0x1ef0000 0x00200>;
+					read-only;
+				};
+
+				partition@1ef0200 {
+					label = "pin";
+					reg = <0x1ef0200 0x00200>;
+					read-only;
+				};
+
+				partition@1ef0400 {
+					label = "product-info";
+					reg = <0x1ef0400 0x0fc00>;
+					read-only;
+				};
+
+				partition@1f00000 {
+					label = "partition-table";
+					reg = <0x1f00000 0x10000>;
+					read-only;
+				};
+
+				partition@1f10000 {
+					label = "soft-version";
+					reg = <0x1f10000 0x10000>;
+					read-only;
+				};
+
+				partition@1f20000 {
+					label = "support-list";
+					reg = <0x1f20000 0x10000>;
+					read-only;
+				};
+
+				partition@1f30000 {
+					label = "profile";
+					reg = <0x1f30000 0x10000>;
+					read-only;
+				};
+
+				partition@1f40000 {
+					label = "default-config";
+					reg = <0x1f40000 0x10000>;
+					read-only;
+				};
+
+				partition@1f50000 {
+					label = "user-config";
+					reg = <0x1f50000 0x40000>;
+					read-only;
+				};
+
+				partition@1f90000 {
+					label = "qos-db";
+					reg = <0x1f90000 0x40000>;
+					read-only;
+				};
+
+				partition@1fd0000 {
+					label = "usb-config";
+					reg = <0x1fd0000 0x10000>;
+					read-only;
+				};
+
+				partition@1fe0000 {
+					label = "log";
+					reg = <0x1fe0000 0x20000>;
+					read-only;
+				};
+			};
+		};
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+
+	pinctrl-0 = <&usb0_pwr_en_pin>;
+	pinctrl-names = "default";
+};
+
+&usb3_1 {
+	status = "okay";
+
+	pinctrl-0 = <&usb1_pwr_en_pin>;
+	pinctrl-names = "default";
+};
+
+&pcie0 {
+	status = "okay";
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			compatible = "pci168c,0040";
+			reg = <0x00010000 0 0 0 0>;
+
+			nvmem-cells = <&macaddr_defaultmac_8>, <&precal_radio_1000>;
+			nvmem-cell-names = "mac-address", "pre-calibration";
+			mac-address-increment = <(-1)>;
+		};
+	};
+};
+
+&pcie1 {
+	status = "okay";
+	max-link-speed = <1>;
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			compatible = "pci168c,0040";
+			reg = <0x00010000 0 0 0 0>;
+
+			nvmem-cells = <&macaddr_defaultmac_8>, <&precal_radio_5000>;
+			nvmem-cell-names = "mac-address", "pre-calibration";
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x00004 0x7600000   /* PAD0_MODE */
+			0x00008 0x1000000   /* PAD5_MODE */
+			0x0000c 0x80        /* PAD6_MODE */
+			0x000e4 0x6a545     /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x4e        /* PORT0_STATUS */
+			0x00094 0x4e        /* PORT6_STATUS */
+			>;
+	};
+
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	qcom,id = <1>;
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+
+	nvmem-cells = <&macaddr_defaultmac_8>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <1>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+
+	nvmem-cells = <&macaddr_defaultmac_8>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};
+
+&defaultmac {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_defaultmac_8: macaddr@8 {
+		reg = <0x8 0x6>;
+	};
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts

@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-ad7200-c2600.dtsi"
+
+/ {
+	model = "TP-Link Talon AD7200";
+	compatible = "tplink,ad7200", "qcom,ipq8064";
+
+	aliases {
+		led-boot = &led_status;
+		led-failsafe = &led_status;
+		led-running = &led_status;
+		led-upgrade = &led_status;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		led_enable {
+			label = "led-enable";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LIGHTS_TOGGLE>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		lan {
+			label = "blue:lan";
+			gpios = <&qcom_pinmux 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb1 {
+			label = "blue:usb1";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan5g {
+			label = "blue:wlan5g";
+			gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb3 {
+			label = "blue:usb3";
+			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2g {
+			label = "blue:wlan2g";
+			gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_orange {
+			label = "orange:wan";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+		};
+
+		wan_blue {
+			label = "blue:wan";
+			gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "blue:wps";
+			gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan60g {
+			label = "blue:wlan60g";
+			gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_status: status {
+			label = "blue:status";
+			gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&qcom_pinmux {
+	button_pins: button_pins {
+		mux {
+			pins = "gpio53", "gpio54", "gpio67";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio2", "gpio8", "gpio15", "gpio16", "gpio17", "gpio26",
+					"gpio33", "gpio55", "gpio56", "gpio66";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&pcie2 {
+	status = "okay";
+	max-link-speed = <1>;
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-ap148.dts

@@ -0,0 +1,121 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
+	compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};
+
+&flash {
+	partitions {
+		compatible = "qcom,smem-part";
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+	max-link-speed = <1>;
+};
+
+&nand {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		compatible = "qcom,nandcs";
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "qcom,smem-part";
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x00004 0x7600000   /* PAD0_MODE */
+			0x00008 0x1000000   /* PAD5_MODE */
+			0x0000c 0x80        /* PAD6_MODE */
+			0x000e4 0x6a545     /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x4e        /* PORT0_STATUS */
+			0x00094 0x4e        /* PORT6_STATUS */
+			>;
+	};
+
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	qcom,id = <1>;
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-ap161.dts

@@ -0,0 +1,159 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+	model = "Qualcomm IPQ8064/AP161";
+	compatible = "qcom,ipq8064-ap161", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+};
+
+&qcom_pinmux {
+	rgmii2_pins: rgmii2_pins {
+		mux {
+			pins = "gpio27", "gpio28", "gpio29",
+			       "gpio30", "gpio31", "gpio32",
+			       "gpio51", "gpio52", "gpio59",
+			       "gpio60", "gpio61", "gpio62",
+			       "gpio2", "gpio66";
+		};
+	};
+};
+
+&flash {
+	partitions {
+		compatible = "qcom,smem-part";
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+	max-link-speed = <1>;
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		compatible = "qcom,nandcs";
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "qcom,smem-part";
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x00004 0x7600000   /* PAD0_MODE */
+			0x00008 0x1000000   /* PAD5_MODE */
+			0x0000c 0x20080     /* PAD6_MODE */
+			0x000e4 0x6a545     /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x4e        /* PORT0_STATUS */
+			0x00094 0x4e        /* PORT6_STATUS */
+			>;
+	};
+
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+		qca,phy-rgmii-en;
+		qca,txclk-delay-en;
+		qca,rxclk-delay-en;
+	};
+
+	phy3: ethernet-phy@3 {
+		device_type = "ethernet-phy";
+		reg = <3>;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	qcom,id = <0>;
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+	mdiobus = <&mdio0>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	qcom,id = <1>;
+	mdiobus = <&mdio0>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+	mdiobus = <&mdio0>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-c2600.dts

@@ -0,0 +1,119 @@
+#include "qcom-ipq8064-ad7200-c2600.dtsi"
+
+/ {
+	model = "TP-Link Archer C2600";
+	compatible = "tplink,c2600", "qcom,ipq8064";
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &general;
+		led-running = &power;
+		led-upgrade = &general;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		ledswitch {
+			label = "ledswitch";
+			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LIGHTS_TOGGLE>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		lan {
+			label = "white:lan";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb4 {
+			label = "white:usb_4";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb2 {
+			label = "white:usb_2";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		wps {
+			label = "white:wps";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_amber {
+			label = "amber:wan";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+		};
+
+		wan_white {
+			label = "white:wan";
+			gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
+		};
+
+		power: power {
+			label = "white:power";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		general: general {
+			label = "white:general";
+			gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&qcom_pinmux {
+	button_pins: button_pins {
+		mux {
+			pins = "gpio16", "gpio54", "gpio65";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
+					"gpio53", "gpio66";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-d7800.dts

@@ -0,0 +1,384 @@
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Netgear Nighthawk X4 D7800";
+	compatible = "netgear,d7800", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		rsvd@5fe00000 {
+			reg = <0x5fe00000 0x200000>;
+			reusable;
+		};
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+
+		led-boot = &power_white;
+		led-failsafe = &power_amber;
+		led-running = &power_white;
+		led-upgrade = &power_amber;
+	};
+
+	chosen {
+		bootargs = "rootfstype=squashfs noinitrd";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		usb1 {
+			label = "white:usb1";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb2 {
+			label = "white:usb2";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_amber: power_amber {
+			label = "amber:power";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_white {
+			label = "white:wan";
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_amber {
+			label = "amber:wan";
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		wps {
+			label = "white:wps";
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		esata {
+			label = "white:esata";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_white: power_white {
+			label = "white:power";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		wifi {
+			label = "white:wifi";
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&qcom_pinmux {
+	button_pins: button_pins {
+		mux {
+			pins = "gpio6", "gpio54", "gpio65";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+				"gpio24","gpio26", "gpio53", "gpio64";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	usb0_pwr_en_pins: usb0_pwr_en_pins {
+		mux {
+			pins = "gpio15";
+			function = "gpio";
+			drive-strength = <12>;
+			bias-pull-down;
+			output-high;
+		};
+	};
+
+	usb1_pwr_en_pins: usb1_pwr_en_pins {
+		mux {
+			pins = "gpio16", "gpio68";
+			function = "gpio";
+			drive-strength = <12>;
+			bias-pull-down;
+			output-high;
+		};
+	};
+};
+
+&sata_phy {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+
+	pinctrl-0 = <&usb0_pwr_en_pins>;
+	pinctrl-names = "default";
+};
+
+&usb3_1 {
+	status = "okay";
+
+	pinctrl-0 = <&usb1_pwr_en_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie0 {
+	status = "okay";
+	reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&pcie0_pins>;
+	pinctrl-names = "default";
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			compatible = "pci168c,0040";
+			reg = <0x00010000 0 0 0 0>;
+
+			nvmem-cells = <&macaddr_art_6>, <&precal_art_1000>;
+			nvmem-cell-names = "mac-address", "pre-calibration";
+			mac-address-increment = <(1)>;
+		};
+	};
+};
+
+&pcie1 {
+	status = "okay";
+	reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&pcie1_pins>;
+	pinctrl-names = "default";
+	max-link-speed = <1>;
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			compatible = "pci168c,0040";
+			reg = <0x00010000 0 0 0 0>;
+
+			nvmem-cells = <&macaddr_art_6>, <&precal_art_5000>;
+			nvmem-cell-names = "mac-address", "pre-calibration";
+			mac-address-increment = <(2)>;
+		};
+	};
+};
+
+&pcie2 {
+	status = "okay";
+	reset-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&pcie2_pins>;
+	pinctrl-names = "default";
+};
+
+&nand {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	nand@0 {
+		reg = <0>;
+		compatible = "qcom,nandcs";
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		nand-is-boot-medium;
+		qcom,boot_pages_size = <0x1180000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qcadata@0 {
+				label = "qcadata";
+				reg = <0x0000000 0x0c80000>;
+				read-only;
+			};
+
+			APPSBL@c80000 {
+				label = "APPSBL";
+				reg = <0x0c80000 0x0500000>;
+				read-only;
+			};
+
+			APPSBLENV@1180000 {
+				label = "APPSBLENV";
+				reg = <0x1180000 0x0080000>;
+				read-only;
+			};
+
+			art@1200000 {
+				label = "art";
+				reg = <0x1200000 0x0140000>;
+				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				macaddr_art_0: macaddr@0 {
+					reg = <0x0 0x6>;
+				};
+
+				macaddr_art_6: macaddr@6 {
+					reg = <0x6 0x6>;
+				};
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
+			};
+
+			artbak: art@1340000 {
+				label = "artbak";
+				reg = <0x1340000 0x0140000>;
+				read-only;
+			};
+
+			kernel@1480000 {
+				label = "kernel";
+				reg = <0x1480000 0x0400000>;
+			};
+
+			ubi@1880000 {
+				label = "ubi";
+				reg = <0x1880000 0x6080000>;
+			};
+
+			reserve@7900000 {
+				label = "reserve";
+				reg = <0x7900000 0x0700000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x00004 0x7600000   /* PAD0_MODE */
+			0x00008 0x1000000   /* PAD5_MODE */
+			0x0000c 0x80        /* PAD6_MODE */
+			0x000e4 0x6a545     /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x4e        /* PORT0_STATUS */
+			0x00094 0x4e        /* PORT6_STATUS */
+			>;
+	};
+
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	qcom,id = <1>;
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+
+	nvmem-cells = <&macaddr_art_6>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+
+	nvmem-cells = <&macaddr_art_0>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-db149.dts

@@ -0,0 +1,163 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+	model = "Qualcomm IPQ8064/DB149";
+	compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
+
+	aliases {
+		serial0 = &gsbi2_serial;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+};
+
+&qcom_pinmux {
+	rgmii0_pins: rgmii0_pins {
+		mux {
+			pins = "gpio2", "gpio66";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+};
+
+&gsbi2 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+
+	gsbi2_serial: serial@12490000 {
+		status = "okay";
+	};
+};
+
+&gsbi4 {
+	status = "disabled";
+};
+
+&gsbi4_serial {
+	status = "disabled";
+};
+
+&flash {
+	m25p,fast-read;
+
+	partition@0 {
+		label = "lowlevel_init";
+		reg = <0x0 0x1b0000>;
+	};
+
+	partition@1 {
+		label = "u-boot";
+		reg = <0x1b0000 0x80000>;
+	};
+
+	partition@2 {
+		label = "u-boot-env";
+		reg = <0x230000 0x40000>;
+	};
+
+	partition@3 {
+		label = "caldata";
+		reg = <0x270000 0x40000>;
+	};
+
+	partition@4 {
+		label = "firmware";
+		reg = <0x2b0000 0x1d50000>;
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x00004 0x7600000   /* PAD0_MODE */
+			0x00008 0x1000000   /* PAD5_MODE */
+			0x0000c 0x80        /* PAD6_MODE */
+			0x000e4 0x6a545     /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x4e        /* PORT0_STATUS */
+			0x00094 0x4e        /* PORT6_STATUS */
+		>;
+	};
+
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+
+	phy6: ethernet-phy@6 {
+		reg = <6>;
+	};
+
+	phy7: ethernet-phy@7 {
+		reg = <7>;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	qcom,id = <0>;
+	phy-handle = <&phy4>;
+
+	pinctrl-0 = <&rgmii0_pins>;
+	pinctrl-names = "default";
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <1>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+	phy-handle = <&phy6>;
+};
+
+&gmac3 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <3>;
+	phy-handle = <&phy7>;
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts

@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-eax500.dtsi"
+
+/ {
+	model = "Linksys EA7500 V1 WiFi Router";
+	compatible = "linksys,ea7500-v1", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0xe000000>;
+		device_type = "memory";
+	};
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		/* look for root deviceblock nbr in this bootarg */
+		find-rootblock = "ubi.mtd=";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		led_power: power {
+			label = "white:power";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+};
+
+&qcom_pinmux {
+	button_pins: button_pins {
+		mux {
+			pins = "gpio65", "gpio68";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio6";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&partitions {
+	partition@5f80000 {
+		label = "sysdiag";
+		reg = <0x5f80000 0x100000>;
+	};
+
+	partition@6080000 {
+		label = "syscfg";
+		reg = <0x6080000 0x1f80000>;
+	};
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts

@@ -0,0 +1,128 @@
+#include "qcom-ipq8064-eax500.dtsi"
+
+/ {
+	model = "Linksys EA8500 WiFi Router";
+	compatible = "linksys,ea8500", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		wps {
+			label = "green:wps";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_power: power {
+			label = "white:power";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		wifi {
+			label = "green:wifi";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&qcom_pinmux {
+	button_pins: button_pins {
+		mux {
+			pins = "gpio65", "gpio67", "gpio68";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio6", "gpio53", "gpio54";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&sata_phy {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&partitions {
+	partition@5f80000 {
+		label = "syscfg";
+		reg = <0x5f80000 0x2080000>;
+	};
+};
+
+&mdio0 {
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&gmac1 {
+	qcom,phy_mdio_addr = <4>;
+	qcom,poll_required = <1>;
+	qcom,rgmii_delay = <0>;
+	qcom,emulation = <0>;
+};
+
+/* LAN */
+&gmac2 {
+	qcom,phy_mdio_addr = <0>;	/* none */
+	qcom,poll_required = <0>;	/* no polling */
+	qcom,rgmii_delay = <0>;
+	qcom,emulation = <0>;
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi

@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		bootargs = "console=ttyMSM0,115200n8";
+		/* append to bootargs adding the root deviceblock nbr from bootloader */
+		append-rootblock = "ubi.mtd=";
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+
+	max-link-speed = <1>;
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		compatible = "qcom,nandcs";
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		nand-is-boot-medium;
+		qcom,boot_pages_size = <0x0c80000>;
+
+		partitions: partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "SBL1";
+				reg = <0x0000000 0x0040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "MIBIB";
+				reg = <0x0040000 0x0140000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "SBL2";
+				reg = <0x0180000 0x0140000>;
+				read-only;
+			};
+
+			partition@2c0000 {
+				label = "SBL3";
+				reg = <0x02c0000 0x0280000>;
+				read-only;
+			};
+
+			partition@540000 {
+				label = "DDRCONFIG";
+				reg = <0x0540000 0x0120000>;
+				read-only;
+			};
+
+			partition@660000 {
+				label = "SSD";
+				reg = <0x0660000 0x0120000>;
+				read-only;
+			};
+
+			partition@780000 {
+				label = "TZ";
+				reg = <0x0780000 0x0280000>;
+				read-only;
+			};
+
+			partition@a00000 {
+				label = "RPM";
+				reg = <0x0a00000 0x0280000>;
+				read-only;
+			};
+
+			art: partition@c80000 {
+				label = "art";
+				reg = <0x0c80000 0x0140000>;
+				read-only;
+			};
+
+			partition@dc0000 {
+				label = "APPSBL";
+				reg = <0x0dc0000 0x0100000>;
+				read-only;
+			};
+
+			partition@ec0000 {
+				label = "u_env";
+				reg = <0x0ec0000 0x0040000>;
+			};
+
+			partition@f00000 {
+				label = "s_env";
+				reg = <0x0f00000 0x0040000>;
+			};
+
+			partition@f40000 {
+				label = "devinfo";
+				reg = <0x0f40000 0x0040000>;
+			};
+
+			partition@f80000 {
+				label = "kernel1";
+				reg = <0x0f80000 0x2800000>;  /* 4 MB, spill to rootfs */
+			};
+
+			partition@1380000 {
+				label = "rootfs1";
+				reg = <0x1380000 0x2400000>;
+			};
+
+			partition@3780000 {
+				label = "kernel2";
+				reg = <0x3780000 0x2800000>;
+			};
+
+			partition@3b80000 {
+				label = "rootfs2";
+				reg = <0x3b80000 0x2400000>;
+			};
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x00004 0x7600000   /* PAD0_MODE */
+			0x00008 0x1000000   /* PAD5_MODE */
+			0x0000c 0x80        /* PAD6_MODE */
+			0x00010 0x2613a0    /* PWS_REG */
+			0x000e4 0x6a545     /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x4e        /* PORT0_STATUS */
+			0x00094 0x4e        /* PORT6_STATUS */
+			>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	qcom,id = <1>;
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-g10.dts

@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	compatible = "asrock,g10", "qcom,ipq8064";
+	model = "ASRock G10";
+
+	aliases {
+		ethernet0 = &gmac1;
+		ethernet1 = &gmac0;
+
+		led-boot = &led_status_blue;
+		led-failsafe = &led_status_amber;
+		led-running = &led_status_blue;
+		led-upgrade = &led_status_amber;
+	};
+
+	chosen {
+		bootargs-override = "console=ttyMSM0,115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		/*
+		 * this is a bit misleading. Because there are about seven
+		 * multicolor LEDs connected all wired together in parallel.
+		 */
+
+		status_yellow {
+			label = "yellow:status";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_status_amber: status_amber {
+			label = "amber:status";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_status_blue: status_blue {
+			label = "blue:status";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		/*
+		 * LED is declared in vendors boardfile but it's not
+		 * working and the manual doesn't mention anything
+		 * about the LED being white.
+
+		status_white {
+			label = "white:status";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+		};
+		*/
+	};
+
+	i2c-gpio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "i2c-gpio";
+		gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>, /* sda */
+			<&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,delay-us = <5>;
+		i2c-gpio,scl-output-only;
+
+		mcu@50 {
+			reg = <0x50>;
+			compatible = "sonix,sn8f25e21";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		ir-remote {
+			label = "ir-remote";
+			gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		wps5g {
+			label = "wps5g";
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		wps2g {
+			label = "wps2g";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii";
+	qcom,id = <1>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gsbi4_serial {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x00004 0x7600000   /* PAD0_MODE */
+			0x00008 0x1000000   /* PAD5_MODE */
+			0x0000c 0x80        /* PAD6_MODE */
+			0x000e4 0x6a545     /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x4e        /* PORT0_STATUS */
+			0x00094 0x4e        /* PORT6_STATUS */
+			>;
+	};
+};
+
+&nand {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		compatible = "qcom,nandcs";
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		nand-is-boot-medium;
+		qcom,boot_pages_size = <0x1200000>;
+
+		partitions {
+			compatible = "qcom,smem-part";
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi5g: wifi@1,0 {
+			reg = <0x00010000 0 0 0 0>;
+			compatible = "qcom,ath10k";
+			qcom,ath10k-calibration-variant = "ASRock-G10";
+		};
+	};
+};
+
+&pcie1 {
+	status = "okay";
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi2g: wifi@1,0 {
+			reg = <0x00010000 0 0 0 0>;
+			compatible = "qcom,ath10k";
+			qcom,ath10k-calibration-variant = "ASRock-G10";
+		};
+	};
+};
+
+&qcom_pinmux {
+	led_pins: led_pins {
+		mux {
+			pins = "gpio7", "gpio8", "gpio9", "gpio26";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	button_pins: button_pins {
+		mux {
+			pins = "gpio15", "gpio16", "gpio64", "gpio65";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	uart0_pins: uart0_pins {
+		mux {
+			pins = "gpio10", "gpio11";
+			function = "gsbi4";
+			drive-strength = <10>;
+			bias-disable;
+		};
+	};
+};
+
+&rpm {
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&tcsr {
+	qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
+};
+
+/delete-node/ &pcie2_pins;
+/delete-node/ &pcie2;

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-r7500.dts

@@ -0,0 +1,314 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "Netgear Nighthawk X4 R7500";
+	compatible = "netgear,r7500", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0xe000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+
+		led-boot = &power_white;
+		led-failsafe = &power_amber;
+		led-running = &power_white;
+		led-upgrade = &power_amber;
+	};
+
+	chosen {
+		bootargs = "rootfstype=squashfs noinitrd";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		usb1 {
+			label = "white:usb1";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb2 {
+			label = "white:usb2";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_amber: power_amber {
+			label = "amber:power";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_white {
+			label = "white:wan";
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_amber {
+			label = "amber:wan";
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		wps {
+			label = "white:wps";
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		esata {
+			label = "white:esata";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_white: power_white {
+			label = "white:power";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		wifi {
+			label = "white:wifi";
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&qcom_pinmux {
+	button_pins: button_pins {
+		mux {
+			pins = "gpio6", "gpio54", "gpio65";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+				"gpio24","gpio26", "gpio53", "gpio64";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&gsbi5 {
+	status = "disabled";
+
+	spi@1a280000 {
+		status = "disabled";
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+	max-link-speed = <1>;
+};
+
+&nand {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		compatible = "qcom,nandcs";
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		nand-is-boot-medium;
+		qcom,boot_pages_size = <0x1180000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qcadata@0 {
+				label = "qcadata";
+				reg = <0x0000000 0x0c80000>;
+				read-only;
+			};
+
+			APPSBL@c80000 {
+				label = "APPSBL";
+				reg = <0x0c80000 0x0500000>;
+				read-only;
+			};
+
+			APPSBLENV@1180000 {
+				label = "APPSBLENV";
+				reg = <0x1180000 0x0080000>;
+				read-only;
+			};
+
+			art: art@1200000 {
+				label = "art";
+				reg = <0x1200000 0x0140000>;
+				read-only;
+			};
+
+			kernel@1340000 {
+				label = "kernel";
+				reg = <0x1340000 0x0400000>;
+			};
+
+			ubi@1740000 {
+				label = "ubi";
+				reg = <0x1740000 0x1600000>;
+			};
+
+			netgear@2d40000 {
+				label = "netgear";
+				reg = <0x2d40000 0x0c00000>;
+				read-only;
+			};
+
+			reserve@3940000 {
+				label = "reserve";
+				reg = <0x3940000 0x46c0000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x00004 0x7600000   /* PAD0_MODE */
+			0x00008 0x1000000   /* PAD5_MODE */
+			0x0000c 0x80        /* PAD6_MODE */
+			0x000e4 0x6a545     /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x4e        /* PORT0_STATUS */
+			0x00094 0x4e        /* PORT6_STATUS */
+			>;
+	};
+
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	qcom,id = <1>;
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+
+	nvmem-cells = <&macaddr_art_6>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+
+	nvmem-cells = <&macaddr_art_0>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&tcsr {
+	qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
+	compatible = "qcom,tcsr";
+};
+
+&adm_dma {
+	status = "okay";
+};
+
+&art {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_art_0: macaddr@0 {
+		reg = <0x0 0x6>;
+	};
+
+	macaddr_art_6: macaddr@6 {
+		reg = <0x6 0x6>;
+	};
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts

@@ -0,0 +1,374 @@
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Netgear Nighthawk X4 R7500v2";
+	compatible = "netgear,r7500v2", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		rsvd@5fe00000 {
+			reg = <0x5fe00000 0x200000>;
+			reusable;
+		};
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
+	};
+
+	chosen {
+		bootargs = "rootfstype=squashfs noinitrd";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		usb1 {
+			label = "amber:usb1";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb3 {
+			label = "amber:usb3";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		status {
+			label = "amber:status";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		internet {
+			label = "white:internet";
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan {
+			label = "white:wan";
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		wps {
+			label = "white:wps";
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		esata {
+			label = "white:esata";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		power: power {
+			label = "white:power";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		wifi {
+			label = "white:wifi";
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};
+
+&qcom_pinmux {
+	button_pins: button_pins {
+		mux {
+			pins = "gpio6", "gpio54", "gpio65";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+				"gpio24","gpio26", "gpio53", "gpio64";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	usb0_pwr_en_pins: usb0_pwr_en_pins {
+		mux {
+			pins = "gpio15";
+			function = "gpio";
+			drive-strength = <12>;
+			bias-pull-down;
+			output-high;
+		};
+	};
+
+	usb1_pwr_en_pins: usb1_pwr_en_pins {
+		mux {
+			pins = "gpio16", "gpio68";
+			function = "gpio";
+			drive-strength = <12>;
+			bias-pull-down;
+			output-high;
+		};
+	};
+};
+
+&sata_phy {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+
+	pinctrl-0 = <&usb0_pwr_en_pins>;
+	pinctrl-names = "default";
+};
+
+&usb3_1 {
+	status = "okay";
+
+	pinctrl-0 = <&usb1_pwr_en_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie0 {
+	status = "okay";
+	reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pcie0_pins>;
+	pinctrl-names = "default";
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			compatible = "pci168c,0040";
+			reg = <0x00010000 0 0 0 0>;
+
+			nvmem-cells = <&macaddr_art_6>, <&precal_art_1000>;
+			nvmem-cell-names = "mac-address", "pre-calibration";
+			mac-address-increment = <(1)>;
+		};
+	};
+};
+
+&pcie1 {
+	status = "okay";
+	reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pcie1_pins>;
+	pinctrl-names = "default";
+	max-link-speed = <1>;
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			compatible = "pci168c,0040";
+			reg = <0x00010000 0 0 0 0>;
+
+			nvmem-cells = <&macaddr_art_6>, <&precal_art_5000>;
+			nvmem-cell-names = "mac-address", "pre-calibration";
+			mac-address-increment = <(2)>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		compatible = "qcom,nandcs";
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		nand-is-boot-medium;
+		qcom,boot_pages_size = <0x1180000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qcadata@0 {
+				label = "qcadata";
+				reg = <0x0000000 0x0c80000>;
+				read-only;
+			};
+
+			APPSBL@c80000 {
+				label = "APPSBL";
+				reg = <0x0c80000 0x0500000>;
+				read-only;
+			};
+
+			APPSBLENV@1180000 {
+				label = "APPSBLENV";
+				reg = <0x1180000 0x0080000>;
+				read-only;
+			};
+
+			art@1200000 {
+				label = "art";
+				reg = <0x1200000 0x0140000>;
+				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				macaddr_art_0: macaddr@0 {
+					reg = <0x0 0x6>;
+				};
+
+				macaddr_art_6: macaddr@6 {
+					reg = <0x6 0x6>;
+				};
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
+			};
+
+			artbak: art@1340000 {
+				label = "artbak";
+				reg = <0x1340000 0x0140000>;
+				read-only;
+			};
+
+			kernel@1480000 {
+				label = "kernel";
+				reg = <0x1480000 0x0400000>;
+			};
+
+			ubi@1880000 {
+				label = "ubi";
+				reg = <0x1880000 0x6080000>;
+			};
+
+			reserve@7900000 {
+				label = "reserve";
+				reg = <0x7900000 0x0700000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x00004 0x7600000   /* PAD0_MODE */
+			0x00008 0x1000000   /* PAD5_MODE */
+			0x0000c 0x80        /* PAD6_MODE */
+			0x000e4 0xaa545     /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x4e        /* PORT0_STATUS */
+			0x00094 0x4e        /* PORT6_STATUS */
+			>;
+	};
+
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	qcom,id = <1>;
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+
+	nvmem-cells = <&macaddr_art_6>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+
+	nvmem-cells = <&macaddr_art_0>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts

@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Ubiquiti UniFi AC HD";
+	compatible = "ubnt,unifi-ac-hd", "qcom,ipq8064";
+
+	aliases {
+		label-mac-device = &gmac2;
+		led-boot = &led_dome_white;
+		led-failsafe = &led_dome_white;
+		led-running = &led_dome_blue;
+		led-upgrade = &led_dome_blue;
+		mdio-gpio0 = &mdio0;
+		ethernet0 = &gmac2;
+		ethernet1 = &gmac1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		led_dome_blue: dome_blue {
+			label = "blue:dome";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_dome_white: dome_white {
+			label = "white:dome";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+};
+
+&qcom_pinmux {
+	button_pins: button_pins {
+		mux {
+			pins = "gpio68";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio9", "gpio53";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+			output-low;
+		};
+	};
+
+	spi_pins: spi_pins {
+		mux {
+			pins = "gpio18", "gpio19", "gpio21";
+			function = "gsbi5";
+			drive-strength = <10>;
+			bias-none;
+		};
+
+		cs {
+			pins = "gpio20";
+			drive-strength = <12>;
+		};
+	};
+};
+
+&CPU_SPC {
+	status = "disabled";
+};
+
+&gsbi5 {
+	status = "okay";
+
+	qcom,mode = <GSBI_PROT_SPI>;
+
+	spi@1a280000 {
+		status = "okay";
+
+		pinctrl-0 = <&spi_pins>;
+		pinctrl-names = "default";
+		cs-gpios = <&qcom_pinmux 20 0>;
+
+		flash@0 {
+			compatible = "mx25u25635f", "jedec,spi-nor";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			spi-max-frequency = <50000000>;
+			reg = <0>;
+			m25p,fast-read;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "SBL1";
+					reg = <0x0 0x20000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "MIBIB";
+					reg = <0x20000 0x10000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "SBL2";
+					reg = <0x30000 0x20000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "SBL3";
+					reg = <0x50000 0x30000>;
+					read-only;
+				};
+
+				partition@80000 {
+					label = "DDRCONFIG";
+					reg = <0x80000 0x10000>;
+					read-only;
+				};
+
+				partition@90000 {
+					label = "SSD";
+					reg = <0x90000 0x10000>;
+					read-only;
+				};
+
+				partition@a0000 {
+					label = "TZ";
+					reg = <0xa0000 0x30000>;
+					read-only;
+				};
+
+				partition@d0000 {
+					label = "RPM";
+					reg = <0xd0000 0x20000>;
+					read-only;
+				};
+
+				partition@f0000 {
+					label = "APPSBL";
+					reg = <0xf0000 0xc0000>;
+					read-only;
+				};
+
+				partition@1b0000 {
+					label = "APPSBLENV";
+					reg = <0x1b0000 0x10000>;
+					read-only;
+				};
+
+				eeprom: partition@1c0000 {
+					label = "EEPROM";
+					reg = <0x1c0000 0x10000>;
+					read-only;
+				};
+
+				partition@1d0000 {
+					label = "bootselect";
+					reg = <0x1d0000 0x10000>;
+				};
+
+				partition@1e0000 {
+					compatible = "denx,fit";
+					label = "firmware";
+					reg = <0x1e0000 0xe70000>;
+				};
+
+				partition@1050000 {
+					label = "kernel1";
+					reg = <0x1050000 0xe70000>;
+					read-only;
+				};
+
+				partition@1ec0000 {
+					label = "debug";
+					reg = <0x1ec0000 0x100000>;
+					read-only;
+				};
+
+				partition@1fc0000 {
+					label = "cfg";
+					reg = <0x1fc0000 0x40000>;
+					read-only;
+				};
+			};
+		};
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+	nand-ecc-strength = <4>;
+	nand-bus-width = <8>;
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+
+	phy5: ethernet-phy@5 {
+		reg = <5>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+
+	mdiobus = <&mdio0>;
+	phy-handle = <&phy5>;
+	phy-mode = "sgmii";
+	qcom,id = <1>;
+
+	nvmem-cells = <&macaddr_eeprom_6>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	status = "okay";
+
+	mdiobus = <&mdio0>;
+	phy-handle = <&phy4>;
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+
+	nvmem-cells = <&macaddr_eeprom_0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&tcsr {
+	status = "okay";
+};
+
+&hs_phy_0 {
+	status = "okay";
+};
+
+&ss_phy_0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&hs_phy_1 {
+	status = "okay";
+};
+
+&ss_phy_1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&eeprom {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_eeprom_0: macaddr@0 {
+		reg = <0x0 0x6>;
+	};
+
+	macaddr_eeprom_6: macaddr@6 {
+		reg = <0x6 0x6>;
+	};
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi

@@ -0,0 +1,69 @@
+#include "qcom-ipq8064.dtsi"
+
+/ {
+	aliases {
+		serial0 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+};
+
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+
+	serial@16340000 {
+		status = "okay";
+	};
+	/*
+	* The i2c device on gsbi4 should not be enabled.
+	* On ipq806x designs gsbi4 i2c is meant for exclusive
+	* RPM usage. Turning this on in kernel manifests as
+	* i2c failure for the RPM.
+	*/
+};
+
+&CPU_SPC {
+	status = "okay";
+};
+
+&pcie0 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie1 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie2 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&sata {
+	ports-implemented = <0x1>;
+};
+
+&ss_phy_0 {
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
+};
+
+&ss_phy_1 {
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts

@@ -0,0 +1,408 @@
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TP-Link Archer VR2600v";
+	compatible = "tplink,vr2600v", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+
+		led-boot = &power;
+		led-failsafe = &general;
+		led-running = &power;
+		led-upgrade = &general;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		dect {
+			label = "dect";
+			gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PHONE>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		ledswitch {
+			label = "ledswitch";
+			gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LIGHTS_TOGGLE>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		dsl {
+			label = "white:dsl";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb {
+			label = "white:usb";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan {
+			label = "white:lan";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2g {
+			label = "white:wlan2g";
+			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan5g {
+			label = "white:wlan5g";
+			gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		power: power {
+			label = "white:power";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		phone {
+			label = "white:phone";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan {
+			label = "white:wan";
+			gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
+		};
+
+		general: general {
+			label = "white:general";
+			gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&qcom_pinmux {
+	led_pins: led_pins {
+		mux {
+			pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
+				"gpio26", "gpio53", "gpio56", "gpio66";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	button_pins: button_pins {
+		mux {
+			pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	spi_pins: spi_pins {
+		mux {
+			pins = "gpio18", "gpio19", "gpio21";
+			function = "gsbi5";
+			bias-pull-down;
+		};
+
+		data {
+			pins = "gpio18", "gpio19";
+			drive-strength = <10>;
+		};
+
+		cs {
+			pins = "gpio20";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+
+		clk {
+			pins = "gpio21";
+			drive-strength = <12>;
+		};
+	};
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_SPI>;
+	status = "okay";
+
+	spi4: spi@1a280000 {
+		status = "okay";
+
+		pinctrl-0 = <&spi_pins>;
+		pinctrl-names = "default";
+
+		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+		flash@0 {
+			compatible = "jedec,spi-nor";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			spi-max-frequency = <50000000>;
+			reg = <0>;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "SBL1";
+					reg = <0x0 0x20000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "MIBIB";
+					reg = <0x20000 0x20000>;
+					read-only;
+				};
+
+				partition@40000 {
+					label = "SBL2";
+					reg = <0x40000 0x40000>;
+					read-only;
+				};
+
+				partition@80000 {
+					label = "SBL3";
+					reg = <0x80000 0x80000>;
+					read-only;
+				};
+
+				partition@100000 {
+					label = "DDRCONFIG";
+					reg = <0x100000 0x10000>;
+					read-only;
+				};
+
+				partition@110000 {
+					label = "SSD";
+					reg = <0x110000 0x10000>;
+					read-only;
+				};
+
+				partition@120000 {
+					label = "TZ";
+					reg = <0x120000 0x80000>;
+					read-only;
+				};
+
+				partition@1a0000 {
+					label = "RPM";
+					reg = <0x1a0000 0x80000>;
+					read-only;
+				};
+
+				partition@220000 {
+					label = "APPSBL";
+					reg = <0x220000 0x80000>;
+					read-only;
+				};
+
+				partition@2a0000 {
+					label = "APPSBLENV";
+					reg = <0x2a0000 0x40000>;
+					read-only;
+				};
+
+				partition@2e0000 {
+					label = "OLDART";
+					reg = <0x2e0000 0x40000>;
+					read-only;
+				};
+
+				partition@320000 {
+					label = "firmware";
+					reg = <0x320000 0xc60000>;
+					compatible = "openwrt,uimage";
+					openwrt,offset = <512>; /* account for pad-extra 512 */
+				};
+
+				/* hole 0xf80000 - 0xfaf100 */
+
+				partition@faf100 {
+					label = "default-mac";
+					reg = <0xfaf100 0x00200>;
+					read-only;
+
+					compatible = "nvmem-cells";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_defaultmac_0: macaddr@0 {
+						reg = <0x0 0x6>;
+					};
+				};
+
+				partition@fc0000 {
+					label = "ART";
+					reg = <0xfc0000 0x40000>;
+					read-only;
+
+					compatible = "nvmem-cells";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					precal_ART_1000: precal@1000 {
+						reg = <0x1000 0x2f20>;
+					};
+
+					precal_ART_5000: precal@5000 {
+						reg = <0x5000 0x2f20>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			compatible = "pci168c,0040";
+			reg = <0x00010000 0 0 0 0>;
+
+			nvmem-cells = <&macaddr_defaultmac_0>, <&precal_ART_1000>;
+			nvmem-cell-names = "mac-address", "pre-calibration";
+			mac-address-increment = <(-1)>;
+		};
+	};
+};
+
+&pcie1 {
+	status = "okay";
+	max-link-speed = <1>;
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			compatible = "pci168c,0040";
+			reg = <0x00010000 0 0 0 0>;
+
+			nvmem-cells = <&macaddr_defaultmac_0>, <&precal_ART_5000>;
+			nvmem-cell-names = "mac-address", "pre-calibration";
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x00004 0x7600000   /* PAD0_MODE */
+			0x00008 0x1000000   /* PAD5_MODE */
+			0x0000c 0x80        /* PAD6_MODE */
+			0x000e4 0x6a545     /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x4e        /* PORT0_STATUS */
+			0x00094 0x4e        /* PORT6_STATUS */
+			>;
+	};
+
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	qcom,id = <1>;
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+
+	nvmem-cells = <&macaddr_defaultmac_0>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <1>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+
+	nvmem-cells = <&macaddr_defaultmac_0>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts

@@ -0,0 +1,447 @@
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "NEC Aterm WG2600HP";
+	compatible = "nec,wg2600hp", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+		led-upgrade = &power_green;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		bridge {
+			label = "bridge";
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		converter {
+			label = "converter";
+			gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		converter_green {
+			label = "green:converter";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_red: power_red {
+			label = "red:power";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		active_green {
+			label = "green:active";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		active_red {
+			label = "red:active";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_green: power_green {
+			label = "green:power";
+			gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		converter_red {
+			label = "red:converter";
+			gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2g_green {
+			label = "green:wlan2g";
+			gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2g_red {
+			label = "red:wlan2g";
+			gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan5g_green {
+			label = "green:wlan5g";
+			gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan5g_red {
+			label = "red:wlan5g";
+			gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
+		};
+
+		tv_green {
+			label = "green:tv";
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+		};
+
+		tv_red {
+			label = "red:tv";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&CPU_SPC {
+	status = "disabled";
+};
+
+&adm_dma {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x00004 0x06000000  /* PAD0_MODE */
+			0x0000c 0x00080080  /* PAD6_MODE */
+			0x000e4 0x0006a545  /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x0000004e  /* PORT0_STATUS */
+			0x00094 0x0000004e  /* PORT6_STATUS */
+			>;
+	};
+
+	ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	qcom,id = <1>;
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+
+	nvmem-cells = <&macaddr_PRODUCTDATA_6>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+
+	nvmem-cells = <&macaddr_PRODUCTDATA_0>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gsbi5 {
+	status = "okay";
+
+	qcom,mode = <GSBI_PROT_SPI>;
+
+	spi@1a280000 {
+		status = "okay";
+
+		pinctrl-0 = <&spi_pins>;
+		pinctrl-names = "default";
+
+		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+		flash@0 {
+			compatible = "jedec,spi-nor";
+			spi-max-frequency = <50000000>;
+			reg = <0>;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				SBL1@0 {
+					label = "SBL1";
+					reg = <0x0 0x20000>;
+					read-only;
+				};
+
+				MIBIB@20000 {
+					label = "MIBIB";
+					reg = <0x20000 0x20000>;
+					read-only;
+				};
+
+				SBL2@40000 {
+					label = "SBL2";
+					reg = <0x40000 0x40000>;
+					read-only;
+				};
+
+				SBL3@80000 {
+					label = "SBL3";
+					reg = <0x80000 0x80000>;
+					read-only;
+				};
+
+				DDRCONFIG@100000 {
+					label = "DDRCONFIG";
+					reg = <0x100000 0x10000>;
+					read-only;
+				};
+
+				SSD@110000 {
+					label = "SSD";
+					reg = <0x110000 0x10000>;
+					read-only;
+				};
+
+				TZ@120000 {
+					label = "TZ";
+					reg = <0x120000 0x80000>;
+					read-only;
+				};
+
+				RPM@1a0000 {
+					label = "RPM";
+					reg = <0x1a0000 0x80000>;
+					read-only;
+				};
+
+				APPSBL@220000 {
+					label = "APPSBL";
+					reg = <0x220000 0x80000>;
+					read-only;
+				};
+
+				APPSBLENV@2a0000 {
+					label = "APPSBLENV";
+					reg = <0x2a0000 0x10000>;
+				};
+
+				PRODUCTDATA: PRODUCTDATA@2b0000 {
+					label = "PRODUCTDATA";
+					reg = <0x2b0000 0x30000>;
+					read-only;
+				};
+
+				ART@2e0000 {
+					label = "ART";
+					reg = <0x2e0000 0x40000>;
+					read-only;
+					compatible = "nvmem-cells";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					precal_ART_1000: precal@1000 {
+						reg = <0x1000 0x2f20>;
+					};
+
+					precal_ART_5000: precal@5000 {
+						reg = <0x5000 0x2f20>;
+					};
+				};
+
+				TP@320000 {
+					label = "TP";
+					reg = <0x320000 0x40000>;
+					read-only;
+				};
+
+				TINY@360000 {
+					label = "TINY";
+					reg = <0x360000 0x500000>;
+					read-only;
+				};
+
+				firmware@860000 {
+					compatible = "denx,uimage";
+					label = "firmware";
+					reg = <0x860000 0x17a0000>;
+				};
+			};
+		};
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+
+	pinctrl-0 = <&usb_pwr_en_pins>;
+	pinctrl-names = "default";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			compatible = "pci168c,0040";
+			reg = <0x00010000 0 0 0 0>;
+
+			nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>;
+			nvmem-cell-names = "mac-address", "pre-calibration";
+		};
+	};
+};
+
+&pcie1 {
+	status = "okay";
+	max-link-speed = <1>;
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			compatible = "pci168c,0040";
+			reg = <0x00010000 0 0 0 0>;
+
+			nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>;
+			nvmem-cell-names = "mac-address", "pre-calibration";
+		};
+	};
+};
+
+&qcom_pinmux {
+	button_pins: button_pins {
+		mux {
+			pins = "gpio16", "gpio54", "gpio24", "gpio25";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14",
+				"gpio15", "gpio55", "gpio56", "gpio57", "gpio58",
+				"gpio64", "gpio65";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	spi_pins: spi_pins {
+		mux {
+			pins = "gpio18", "gpio19", "gpio21";
+			function = "gsbi5";
+			bias-pull-down;
+		};
+
+		data {
+			pins = "gpio18", "gpio19";
+			drive-strength = <10>;
+		};
+
+		cs {
+			pins = "gpio20";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+
+		clk {
+			pins = "gpio21";
+			drive-strength = <12>;
+		};
+	};
+
+	usb_pwr_en_pins: usb_pwr_en_pins {
+		mux {
+			pins = "gpio22";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+			output-high;
+		};
+	};
+};
+
+&PRODUCTDATA {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_PRODUCTDATA_0: macaddr@0 {
+		reg = <0x0 0x6>;
+	};
+
+	macaddr_PRODUCTDATA_6: macaddr@6 {
+		reg = <0x6 0x6>;
+	};
+
+	macaddr_PRODUCTDATA_c: macaddr@c {
+		reg = <0xc 0x6>;
+	};
+
+	macaddr_PRODUCTDATA_12: macaddr@12 {
+		reg = <0x12 0x6>;
+	};
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts

@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ *  Copyright (C) 2017 Christian Mehlis <[email protected]>
+ *  Copyright (C) 2018 Mathias Kresin <[email protected]>
+ *  All rights reserved.
+ */
+
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	compatible = "compex,wpq864", "qcom,ipq8064";
+	model = "Compex WPQ864";
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+		ethernet0 = &gmac1;
+		ethernet1 = &gmac0;
+
+		led-boot = &led_pass;
+		led-failsafe = &led_fail;
+		led-running = &led_pass;
+		led-upgrade = &led_pass;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		rss4 {
+			label = "green:rss4";
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		rss3 {
+			label = "green:rss3";
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		rss2 {
+			label = "orange:rss2";
+			gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
+		};
+
+		rss1 {
+			label = "red:rss1";
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_pass: pass {
+			label = "green:pass";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_fail: fail {
+			label = "green:fail";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb {
+			label = "green:usb";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb-pcie {
+			label = "green:usb-pcie";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+
+		pinctrl-0 = <&beeper_pins>;
+		pinctrl-names = "default";
+
+		gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&rpm {
+	pinctrl-0 = <&rpm_pins>;
+	pinctrl-names = "default";
+};
+
+&nand {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	mt29f2g08abbeah4@0 {
+		compatible = "qcom,nandcs";
+
+		reg = <0>;
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		nand-is-boot-medium;
+		qcom,boot_pages_size = <0x1180000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			SBL1@0 {
+				label = "SBL1";
+				reg = <0x0000000 0x0040000>;
+				read-only;
+			};
+
+			MIBIB@40000 {
+				label = "MIBIB";
+				reg = <0x0040000 0x0140000>;
+				read-only;
+			};
+
+			SBL2@180000 {
+				label = "SBL2";
+				reg = <0x0180000 0x0140000>;
+				read-only;
+			};
+
+			SBL3@2c0000 {
+				label = "SBL3";
+				reg = <0x02c0000 0x0280000>;
+				read-only;
+			};
+
+			DDRCONFIG@540000 {
+				label = "DDRCONFIG";
+				reg = <0x0540000 0x0120000>;
+				read-only;
+			};
+
+			SSD@660000 {
+				label = "SSD";
+				reg = <0x0660000 0x0120000>;
+				read-only;
+			};
+
+			TZ@780000 {
+				label = "TZ";
+				reg = <0x0780000 0x0280000>;
+				read-only;
+			};
+
+			RPM@a00000 {
+				label = "RPM";
+				reg = <0x0a00000 0x0280000>;
+				read-only;
+			};
+
+			APPSBL@c80000 {
+				label = "APPSBL";
+				reg = <0x0c80000 0x0500000>;
+				read-only;
+			};
+
+			APPSBLENV@1180000 {
+				label = "APPSBLENV";
+				reg = <0x1180000 0x0080000>;
+			};
+
+			ART@1200000 {
+				label = "ART";
+				reg = <0x1200000 0x0140000>;
+			};
+
+			ubi@1340000 {
+				label = "ubi";
+				reg = <0x1340000 0x4000000>;
+			};
+
+			BOOTCONFIG@5340000 {
+				label = "BOOTCONFIG";
+				reg = <0x5340000 0x0060000>;
+			};
+
+			SBL2-1@53a0000- {
+				label = "SBL2_1";
+				reg = <0x53a0000 0x0140000>;
+				read-only;
+			};
+
+			SBL3-1@54e0000 {
+				label = "SBL3_1";
+				reg = <0x54e0000 0x0280000>;
+				read-only;
+			};
+
+			DDRCONFIG-1@5760000 {
+				label = "DDRCONFIG_1";
+				reg = <0x5760000 0x0120000>;
+				read-only;
+			};
+
+			SSD-1@5880000 {
+				label = "SSD_1";
+				reg = <0x5880000 0x0120000>;
+				read-only;
+			};
+
+			TZ-1@59a0000 {
+				label = "TZ_1";
+				reg = <0x59a0000 0x0280000>;
+				read-only;
+			};
+
+			RPM-1@5c20000 {
+				label = "RPM_1";
+				reg = <0x5c20000 0x0280000>;
+				read-only;
+			};
+
+			BOOTCONFIG1@5ea0000 {
+				label = "BOOTCONFIG1";
+				reg = <0x5ea0000 0x0060000>;
+			};
+
+			APPSBL-1@5f00000 {
+				label = "APPSBL_1";
+				reg = <0x5f00000 0x0500000>;
+				read-only;
+			};
+
+			ubi-1@6400000 {
+				label = "ubi_1";
+				reg = <0x6400000 0x4000000>;
+			};
+
+			unused@a400000 {
+				label = "unused";
+				reg = <0xa400000 0x5c00000>;
+			};
+		};
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x00004 0x7600000   /* PAD0_MODE */
+			0x00008 0x1000000   /* PAD5_MODE */
+			0x0000c 0x80        /* PAD6_MODE */
+			0x000e4 0x6a545     /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x4e        /* PORT0_STATUS */
+			0x00094 0x4e        /* PORT6_STATUS */
+			>;
+	};
+
+	ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii";
+	qcom,id = <1>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gsbi4_serial {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+&flash {
+	compatible = "jedec,spi-nor";
+};
+
+&sata_phy {
+	status = "disabled";
+};
+
+&sata {
+	status = "disabled";
+};
+
+&ss_phy_0 {		/* USB3 port 0 SS phy */
+	status = "okay";
+
+	rx_eq = <2>;
+	tx_deamp_3_5db = <32>;
+	mpll = <160>;
+};
+
+&ss_phy_1 {		/* USB3 port 1 SS phy */
+	status = "okay";
+
+	rx_eq = <2>;
+	tx_deamp_3_5db = <32>;
+	mpll = <160>;
+};
+
+&pcie0 {
+	status = "okay";
+
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	/delete-property/ perst-gpios;
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	/delete-property/ perst-gpios;
+};
+
+&qcom_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: pinctrl0 {
+		pcie0_pcie2_perst {
+			pins = "gpio3";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio7", "gpio8", "gpio9", "gpio22",
+			       "gpio23", "gpio24", "gpio25", "gpio53";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	button_pins: button_pins {
+		mux {
+			pins = "gpio54";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	beeper_pins: beeper_pins {
+		mux {
+			pins = "gpio55";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rpm_pins: rpm_pins {
+		mux {
+			pins = "gpio12", "gpio13";
+			function = "gsbi4";
+			drive-strength = <10>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0_pins {
+		mux {
+			pins = "gpio10", "gpio11";
+			function = "gsbi4";
+			drive-strength = <10>;
+			bias-disable;
+		};
+	};
+
+	spi_pins: spi_pins {
+		mux {
+			pins = "gpio18", "gpio19";
+			function = "gsbi5";
+			drive-strength = <10>;
+			bias-pull-down;
+		};
+
+		clk {
+			pins = "gpio21";
+			function = "gsbi5";
+			drive-strength = <12>;
+			bias-pull-down;
+		};
+
+		cs {
+			pins = "gpio20";
+			function = "gpio";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&tcsr {
+	qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts

@@ -0,0 +1,526 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Buffalo WXR-2533DHP";
+	compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064";
+
+	memory@42000000 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &diag;
+		led-running = &power;
+		led-upgrade = &power;
+	};
+
+	chosen {
+		/* use "ubi_rootfs" volume in "ubi" partition as rootfs */
+		bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		usb {
+			label = "green:usb";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port0 &hub_port1>;
+		};
+
+		guestport {
+			label = "green:guestport";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		diag: diag {
+			label = "orange:diag";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		internet_orange {
+			label = "orange:internet";
+			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		internet_white {
+			label = "white:internet";
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		wireless_orange {
+			label = "orange:wireless";
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		wireless_white {
+			label = "white:wireless";
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		router_orange {
+			label = "orange:router";
+			gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
+		};
+
+		router_white {
+			label = "white:router";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+		};
+
+		power: power {
+			label = "white:power";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		power {
+			label = "power";
+			gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		eject {
+			label = "eject";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_EJECTCD>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		guest {
+			label = "guest";
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		ap {
+			label = "ap";
+			gpios = <&qcom_pinmux 55 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_1>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		router {
+			label = "router";
+			gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_1>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		auto {
+			label = "auto";
+			gpios = <&qcom_pinmux 57 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_1>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	cs@0 {
+		reg = <0>;
+		compatible = "qcom,nandcs";
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ubi@0 {
+				label = "ubi";
+				reg = <0x0000000 0x4000000>;
+			};
+
+			rootfs_1@4000000 {
+				label = "rootfs_1";
+				reg = <0x4000000 0x4000000>;
+			};
+		};
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x00004 0x07600000  /* PAD0_MODE */
+			0x00008 0x01000000  /* PAD5_MODE */
+			0x0000c 0x00000080  /* PAD6_MODE */
+			0x00050 0xcc35cc35  /* LED_CTRL0 */
+			0x00054 0xca35ca35  /* LED_CTRL1 */
+			0x00058 0xc935c935  /* LED_CTRL2 */
+			0x0005c 0x03ffff00  /* LED_CTRL3 */
+			0x000e4 0x0006a545  /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x0000007e  /* PORT0_STATUS */
+			0x00094 0x0000007e  /* PORT6_STATUS */
+			>;
+	};
+
+	ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	qcom,id = <1>;
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+
+	nvmem-cells = <&macaddr_ART_6>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+
+	nvmem-cells = <&macaddr_ART_0>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gsbi4_serial {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+&gsbi5 {
+	status = "okay";
+	qcom,mode = <GSBI_PROT_SPI>;
+
+	spi@1a280000 {
+		status = "okay";
+
+		pinctrl-0 = <&spi_pins>;
+		pinctrl-names = "default";
+
+		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+		flash@0 {
+			compatible = "jedec,spi-nor";
+			spi-max-frequency = <50000000>;
+			reg = <0>;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				SBL1@0 {
+					label = "SBL1";
+					reg = <0x0 0x10000>;
+					read-only;
+				};
+
+				MIBIB@10000 {
+					label = "MIBIB";
+					reg = <0x10000 0x20000>;
+					read-only;
+				};
+
+				SBL2@30000 {
+					label = "SBL2";
+					reg = <0x30000 0x30000>;
+					read-only;
+				};
+
+				SBL3@60000 {
+					label = "SBL3";
+					reg = <0x60000 0x30000>;
+					read-only;
+				};
+
+				DDRCONFIG@90000 {
+					label = "DDRCONFIG";
+					reg = <0x90000 0x10000>;
+					read-only;
+				};
+
+				SSD@a0000 {
+					label = "SSD";
+					reg = <0xa0000 0x10000>;
+					read-only;
+				};
+
+				TZ@b0000 {
+					label = "TZ";
+					reg = <0xb0000 0x30000>;
+					read-only;
+				};
+
+				RPM@e0000 {
+					label = "RPM";
+					reg = <0xe0000 0x20000>;
+					read-only;
+				};
+
+				APPSBL@100000 {
+					label = "APPSBL";
+					reg = <0x100000 0x70000>;
+					read-only;
+				};
+
+				APPSBLENV@170000 {
+					label = "APPSBLENV";
+					reg = <0x170000 0x10000>;
+					read-only;
+				};
+
+				ART@180000 {
+					label = "ART";
+					reg = <0x180000 0x40000>;
+					read-only;
+
+					compatible = "nvmem-cells";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_ART_0: macaddr@0 {
+						reg = <0x0 0x6>;
+					};
+
+					macaddr_ART_6: macaddr@6 {
+						reg = <0x6 0x6>;
+					};
+
+					macaddr_ART_18: macaddr@18 {
+						reg = <0x18 0x6>;
+					};
+
+					macaddr_ART_1e: macaddr@1e {
+						reg = <0x1e 0x6>;
+					};
+
+					precal_ART_1000: precal@1000 {
+						reg = <0x1000 0x2f20>;
+					};
+
+					precal_ART_5000: precal@5000 {
+						reg = <0x5000 0x2f20>;
+					};
+				};
+
+				BOOTCONFIG@1c0000 {
+					label = "BOOTCONFIG";
+					reg = <0x1c0000 0x10000>;
+					read-only;
+				};
+
+				APPSBL_1@1d0000 {
+					label = "APPSBL_1";
+					reg = <0x1d0000 0x70000>;
+					read-only;
+				};
+			};
+		};
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+
+	pinctrl-0 = <&usb_pwr_en_pins>;
+	pinctrl-names = "default";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&dwc3_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_port0: port@1 {
+		reg = <1>;
+		#trigger-source-cells = <0>;
+	};
+};
+
+&dwc3_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_port1: port@1 {
+		reg = <1>;
+		#trigger-source-cells = <0>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			compatible = "pci168c,0040";
+			reg = <0x00010000 0 0 0 0>;
+
+			nvmem-cells = <&macaddr_ART_1e>, <&precal_ART_1000>;
+			nvmem-cell-names = "mac-address", "pre-calibration";
+		};
+	};
+};
+
+&pcie1 {
+	status = "okay";
+	max-link-speed = <1>;
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			compatible = "pci168c,0040";
+			reg = <0x00010000 0 0 0 0>;
+
+			nvmem-cells = <&macaddr_ART_18>, <&precal_ART_5000>;
+			nvmem-cell-names = "mac-address", "pre-calibration";
+		};
+	};
+};
+
+&qcom_pinmux {
+	button_pins: button_pins {
+		mux {
+			pins = "gpio6", "gpio54", "gpio55", "gpio56", "gpio57",
+				"gpio58", "gpio64", "gpio65";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22",
+				"gpio23", "gpio24", "gpio25", "gpio26", "gpio53";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	uart0_pins: uart0_pins {
+		mux {
+			pins = "gpio10", "gpio11";
+			function = "gsbi4";
+			drive-strength = <12>;
+			bias-disable;
+		};
+	};
+
+	spi_pins: spi_pins {
+		mux {
+			pins = "gpio18", "gpio19", "gpio21";
+			function = "gsbi5";
+			bias-pull-down;
+		};
+
+		data {
+			pins = "gpio18", "gpio19";
+			drive-strength = <10>;
+		};
+
+		cs{
+			pins = "gpio20";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+
+		clk {
+			pins = "gpio21";
+			drive-strength = <12>;
+		};
+	};
+
+	usb_pwr_en_pins: usb_pwr_en_pins {
+		mux{
+			pins = "gpio68";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+			output-high;
+		};
+	};
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts

@@ -0,0 +1,316 @@
+#include "qcom-ipq8065.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "ZyXEL NBG6817";
+	compatible = "zyxel,nbg6817", "qcom,ipq8065", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+		sdcc1 = &sdcc1;
+
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
+	};
+
+	chosen {
+		bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd fstools_ignore_partname=1";
+		append-rootblock = "root=/dev/mmcblk0p";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		internet {
+			label = "white:internet";
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+		};
+
+		power: power {
+			label = "white:power";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		wifi2g {
+			label = "amber:wifi2g";
+			gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* wifi2g amber from the manual is missing */
+
+		wifi5g {
+			label = "amber:wifi5g";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* wifi5g amber from the manual is missing */
+	};
+};
+
+&qcom_pinmux {
+	button_pins: button_pins {
+		mux {
+			pins = "gpio53", "gpio54", "gpio65";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio9", "gpio26", "gpio33", "gpio64";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	mdio0_pins: mdio0_pins {
+		clk {
+			pins = "gpio1";
+			input-disable;
+		};
+	};
+
+	rgmii2_pins: rgmii2_pins {
+		tx {
+			pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
+			input-disable;
+		};
+	};
+
+	spi_pins: spi_pins {
+		cs {
+			pins = "gpio20";
+			drive-strength = <12>;
+		};
+	};
+
+	usb0_pwr_en_pins: usb0_pwr_en_pins {
+		mux {
+			pins = "gpio16", "gpio17";
+			function = "gpio";
+			drive-strength = <12>;
+		};
+
+		pwr {
+			pins = "gpio17";
+			bias-pull-down;
+			output-high;
+		};
+
+		ovc {
+			pins = "gpio16";
+			bias-pull-up;
+		};
+	};
+
+	usb1_pwr_en_pins: usb1_pwr_en_pins {
+		mux {
+			pins = "gpio14", "gpio15";
+			function = "gpio";
+			drive-strength = <12>;
+		};
+
+		pwr {
+			pins = "gpio14";
+			bias-pull-down;
+			output-high;
+		};
+
+		ovc {
+			pins = "gpio15";
+			bias-pull-up;
+		};
+	};
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_SPI>;
+	status = "okay";
+
+	spi4: spi@1a280000 {
+		status = "okay";
+
+		pinctrl-0 = <&spi_pins>;
+		pinctrl-names = "default";
+
+		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+		m25p80@0 {
+			compatible = "jedec,spi-nor";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			spi-max-frequency = <51200000>;
+			reg = <0>;
+
+			partitions {
+				compatible = "qcom,smem-part";
+			};
+		};
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+
+	pinctrl-0 = <&usb0_pwr_en_pins>;
+	pinctrl-names = "default";
+};
+
+&usb3_1 {
+	status = "okay";
+
+	pinctrl-0 = <&usb1_pwr_en_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie0 {
+	status = "okay";
+	reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pcie0_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie1 {
+	status = "okay";
+	reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pcie1_pins>;
+	pinctrl-names = "default";
+	max-link-speed = <1>;
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x00004 0x7600000   /* PAD0_MODE */
+			0x00008 0x1000000   /* PAD5_MODE */
+			0x0000c 0x80        /* PAD6_MODE */
+			0x000e4 0xaa545     /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x4e        /* PORT0_STATUS */
+			0x00094 0x4e        /* PORT6_STATUS */
+			0x00970 0x1e864443  /* QM_PORT0_CTRL0 */
+			0x00974 0x000001c6  /* QM_PORT0_CTRL1 */
+			0x00978 0x19008643  /* QM_PORT1_CTRL0 */
+			0x0097c 0x000001c6  /* QM_PORT1_CTRL1 */
+			0x00980 0x19008643  /* QM_PORT2_CTRL0 */
+			0x00984 0x000001c6  /* QM_PORT2_CTRL1 */
+			0x00988 0x19008643  /* QM_PORT3_CTRL0 */
+			0x0098c 0x000001c6  /* QM_PORT3_CTRL1 */
+			0x00990 0x19008643  /* QM_PORT4_CTRL0 */
+			0x00994 0x000001c6  /* QM_PORT4_CTRL1 */
+			0x00998 0x1e864443  /* QM_PORT5_CTRL0 */
+			0x0099c 0x000001c6  /* QM_PORT5_CTRL1 */
+			0x009a0 0x1e864443  /* QM_PORT6_CTRL0 */
+			0x009a4 0x000001c6  /* QM_PORT6_CTRL1 */
+			>;
+	};
+
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+		qca,ar8327-initvals = <
+			0x000e4 0x6a545     /* MAC_POWER_SEL */
+			0x0000c 0x80        /* PAD6_MODE */
+			>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	qcom,id = <1>;
+	qcom,phy_mdio_addr = <4>;
+	qcom,poll_required = <0>;
+	qcom,rgmii_delay = <1>;
+	qcom,phy_mii_type = <0>;
+	qcom,emulation = <0>;
+	qcom,irq = <255>;
+	mdiobus = <&mdio0>;
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+	qcom,phy_mdio_addr = <0>;	/* none */
+	qcom,poll_required = <0>;	/* no polling */
+	qcom,rgmii_delay = <0>;
+	qcom,phy_mii_type = <1>;
+	qcom,emulation = <0>;
+	qcom,irq = <258>;
+	mdiobus = <&mdio0>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&amba {
+	sdcc1: sdcc@12400000 {
+		status = "okay";
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi

@@ -0,0 +1,453 @@
+#include "qcom-ipq8065.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		rsvd@5fe00000 {
+			reg = <0x5fe00000 0x200000>;
+			reusable;
+		};
+
+		ramoops@42100000 {
+			compatible = "ramoops";
+			reg = <0x42100000 0x40000>;
+			record-size = <0x4000>;
+			console-size = <0x4000>;
+			ftrace-size = <0x4000>;
+			pmsg-size = <0x4000>;
+		};
+	};
+
+	aliases {
+		label-mac-device = &gmac2;
+
+		led-boot = &power_white;
+		led-failsafe = &power_amber;
+		led-running = &power_white;
+		led-upgrade = &power_amber;
+
+		mdio-gpio0 = &mdio0;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		power_white: power_white {
+			label = "white:power";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		power_amber: power_amber {
+			label = "amber:power";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_white {
+			label = "white:wan";
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_amber {
+			label = "amber:wan";
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		wifi {
+			label = "white:wifi";
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+		};
+
+		wps {
+			label = "white:wps";
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&qcom_pinmux {
+	button_pins: button_pins {
+		mux {
+			pins = "gpio6", "gpio54", "gpio65";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio7", "gpio8", "gpio9",
+				"gpio22", "gpio23", "gpio24",
+				"gpio26", "gpio53", "gpio64";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	mdio0_pins: mdio0_pins {
+		clk {
+			pins = "gpio1";
+			input-disable;
+		};
+	};
+
+	rgmii2_pins: rgmii2_pins {
+		tx {
+			pins = "gpio27", "gpio28", "gpio29",
+				"gpio30", "gpio31", "gpio32";
+			input-disable;
+		};
+	};
+
+	spi_pins: spi_pins {
+		mux {
+			pins = "gpio18", "gpio19", "gpio21";
+			function = "gsbi5";
+			bias-pull-down;
+		};
+
+		data {
+			pins = "gpio18", "gpio19";
+			drive-strength = <10>;
+		};
+
+		cs {
+			pins = "gpio20";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+
+		clk {
+			pins = "gpio21";
+			drive-strength = <12>;
+		};
+	};
+
+	spi6_pins: spi6_pins {
+		mux {
+			pins = "gpio55", "gpio56", "gpio58";
+			function = "gsbi6";
+			bias-pull-down;
+		};
+
+		mosi {
+			pins = "gpio55";
+			drive-strength = <12>;
+		};
+
+		miso {
+			pins = "gpio56";
+			drive-strength = <14>;
+		};
+
+		cs {
+			pins = "gpio57";
+			drive-strength = <12>;
+			bias-pull-up;
+		};
+
+		clk {
+			pins = "gpio58";
+			drive-strength = <12>;
+		};
+
+		reset {
+			pins = "gpio33";
+			drive-strength = <10>;
+			bias-pull-down;
+			output-high;
+		};
+	};
+
+	usb0_pwr_en_pins: usb0_pwr_en_pins {
+		mux {
+			pins = "gpio15";
+			function = "gpio";
+			drive-strength = <12>;
+			bias-pull-down;
+			output-high;
+		};
+	};
+
+	usb1_pwr_en_pins: usb1_pwr_en_pins {
+		mux {
+			pins = "gpio16", "gpio68";
+			function = "gpio";
+			drive-strength = <12>;
+			bias-pull-down;
+			output-high;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		compatible = "qcom,nandcs";
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		nand-is-boot-medium;
+		qcom,boot_pages_size = <0x1180000>;
+
+		partitions: partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "qcadata";
+				reg = <0x0000000 0x0c80000>;
+				read-only;
+			};
+
+			partition@c80000 {
+				label = "APPSBL";
+				reg = <0x0c80000 0x0500000>;
+				read-only;
+			};
+
+			partition@1180000 {
+				label = "APPSBLENV";
+				reg = <0x1180000 0x0080000>;
+				read-only;
+			};
+
+			art: partition@1200000 {
+				label = "art";
+				reg = <0x1200000 0x0140000>;
+				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				macaddr_art_0: macaddr@0 {
+					reg = <0x0 0x6>;
+				};
+
+				macaddr_art_6: macaddr@6 {
+					reg = <0x6 0x6>;
+				};
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
+			};
+
+			partition@1340000 {
+				label = "artbak";
+				reg = <0x1340000 0x0140000>;
+				read-only;
+			};
+
+			partition@1480000 {
+				label = "kernel";
+				reg = <0x1480000 0x0400000>;
+			};
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		qca,ar8327-initvals = <
+			0x00004 0x7600000   /* PAD0_MODE */
+			0x00008 0x1000000   /* PAD5_MODE */
+			0x0000c 0x80        /* PAD6_MODE */
+			0x000e4 0xaa545     /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x4e        /* PORT0_STATUS */
+			0x00094 0x4e        /* PORT6_STATUS */
+			0x00970 0x1e864443  /* QM_PORT0_CTRL0 */
+			0x00974 0x000001c6  /* QM_PORT0_CTRL1 */
+			0x00978 0x19008643  /* QM_PORT1_CTRL0 */
+			0x0097c 0x000001c6  /* QM_PORT1_CTRL1 */
+			0x00980 0x19008643  /* QM_PORT2_CTRL0 */
+			0x00984 0x000001c6  /* QM_PORT2_CTRL1 */
+			0x00988 0x19008643  /* QM_PORT3_CTRL0 */
+			0x0098c 0x000001c6  /* QM_PORT3_CTRL1 */
+			0x00990 0x19008643  /* QM_PORT4_CTRL0 */
+			0x00994 0x000001c6  /* QM_PORT4_CTRL1 */
+			0x00998 0x1e864443  /* QM_PORT5_CTRL0 */
+			0x0099c 0x000001c6  /* QM_PORT5_CTRL1 */
+			0x009a0 0x1e864443  /* QM_PORT6_CTRL0 */
+			0x009a4 0x000001c6  /* QM_PORT6_CTRL1 */
+			>;
+		qca,ar8327-vlans = <
+			0x1	0x5e	    /* VLAN1 Ports 1/2/3/4/6 */
+			0x2	0x21	    /* VLAN2 Ports 0/5 */
+		>;
+	};
+
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+		qca,ar8327-initvals = <
+			0x000e4 0x6a545     /* MAC_POWER_SEL */
+			0x0000c 0x80        /* PAD6_MODE */
+			>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	qcom,id = <1>;
+	qcom,phy_mdio_addr = <4>;
+	qcom,poll_required = <0>;
+	qcom,rgmii_delay = <1>;
+	qcom,phy_mii_type = <0>;
+	qcom,emulation = <0>;
+	qcom,irq = <255>;
+	mdiobus = <&mdio0>;
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+
+	nvmem-cells = <&macaddr_art_6>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+	qcom,phy_mdio_addr = <0>;	/* none */
+	qcom,poll_required = <0>;	/* no polling */
+	qcom,rgmii_delay = <0>;
+	qcom,phy_mii_type = <1>;
+	qcom,emulation = <0>;
+	qcom,irq = <258>;
+	mdiobus = <&mdio0>;
+
+	nvmem-cells = <&macaddr_art_0>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+
+	pinctrl-0 = <&usb0_pwr_en_pins>;
+	pinctrl-names = "default";
+};
+
+&usb3_1 {
+	status = "okay";
+
+	pinctrl-0 = <&usb1_pwr_en_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie0 {
+	status = "okay";
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi0: wifi@1,0 {
+			compatible = "pci168c,0046";
+			reg = <0x00010000 0 0 0 0>;
+		};
+	};
+};
+
+&pcie1 {
+	status = "okay";
+
+	max-link-speed = <1>;
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi1: wifi@1,0 {
+			compatible = "pci168c,0046";
+			reg = <0x00010000 0 0 0 0>;
+		};
+	};
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8065-r7800.dts

@@ -0,0 +1,48 @@
+#include "qcom-ipq8065-nighthawk.dtsi"
+
+/ {
+	model = "Netgear Nighthawk X4S R7800";
+	compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
+};
+
+&leds {
+	usb1 {
+		label = "white:usb1";
+		gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb2 {
+		label = "white:usb2";
+		gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	esata {
+		label = "white:esata";
+		gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&partitions {
+	partition@1880000 {
+		label = "ubi";
+		reg = <0x1880000 0x6080000>;
+	};
+
+	partition@7900000 {
+		label = "reserve";
+		reg = <0x7900000 0x0700000>;
+		read-only;
+	};
+};
+
+&wifi0 {
+	nvmem-cells = <&macaddr_art_6>, <&precal_art_1000>;
+	nvmem-cell-names = "mac-address", "pre-calibration";
+	mac-address-increment = <(1)>;
+};
+
+&wifi1 {
+	nvmem-cells = <&macaddr_art_6>, <&precal_art_5000>;
+	nvmem-cell-names = "mac-address", "pre-calibration";
+	mac-address-increment = <(2)>;
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts

@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qcom-ipq8065.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Askey RT4230W REV6";
+	compatible = "askey,rt4230w-rev6", "qcom,ipq8065", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x3e000000>;
+		device_type = "memory";
+	};
+
+	aliases {
+		led-boot = &ledctrl3;
+		led-failsafe = &ledctrl1;
+		led-running = &ledctrl2;
+		led-upgrade = &ledctrl3;
+	};
+
+	chosen {
+		bootargs = "rootfstype=squashfs noinitrd";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		ledctrl1: ledctrl1 {
+			label = "ledctrl1";
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		ledctrl2: ledctrl2 {
+			label = "ledctrl2";
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		ledctrl3: ledctrl3 {
+			label = "ledctrl3";
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&qcom_pinmux {
+	button_pins: button_pins {
+		mux {
+			pins = "gpio54", "gpio68";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio22", "gpio23", "gpio24";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	rgmii2_pins: rgmii2_pins {
+		mux {
+			pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31",
+				"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62";
+			function = "rgmii2";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		tx {
+			pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
+			input-disable;
+		};
+	};
+
+	spi_pins: spi_pins {
+		cs {
+			pins = "gpio20";
+			drive-strength = <12>;
+		};
+	};
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_SPI>;
+	status = "okay";
+
+	spi@1a280000 {
+		status = "okay";
+
+		pinctrl-0 = <&spi_pins>;
+		pinctrl-names = "default";
+
+		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+		flash@0 {
+			compatible = "everspin,mr25h256";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			spi-max-frequency = <40000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		compatible = "qcom,nandcs";
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "0:SBL1";
+				reg = <0x0000000 0x0040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "0:MIBIB";
+				reg = <0x0040000 0x0140000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "0:SBL2";
+				reg = <0x0180000 0x0140000>;
+				read-only;
+			};
+
+			partition@2c0000 {
+				label = "0:SBL3";
+				reg = <0x02c0000 0x0280000>;
+				read-only;
+			};
+
+			partition@540000 {
+				label = "0:DDRCONFIG";
+				reg = <0x0540000 0x0120000>;
+				read-only;
+			};
+
+			partition@660000 {
+				label = "0:SSD";
+				reg = <0x0660000 0x0120000>;
+				read-only;
+			};
+
+			partition@780000 {
+				label = "0:TZ";
+				reg = <0x0780000 0x0280000>;
+				read-only;
+			};
+
+			partition@a00000 {
+				label = "0:RPM";
+				reg = <0x0a00000 0x0280000>;
+				read-only;
+			};
+
+			partition@c80000 {
+				label = "0:APPSBL";
+				reg = <0x0c80000 0x0500000>;
+				read-only;
+			};
+
+			partition@1180000 {
+				label = "0:APPSBLENV";
+				reg = <0x1180000 0x0080000>;
+			};
+
+			partition@1200000 {
+				label = "0:ART";
+				reg = <0x1200000 0x0140000>;
+				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				macaddr_ART_0: macaddr@0 {
+					reg = <0x0 0x6>;
+				};
+
+				macaddr_ART_6: macaddr@6 {
+					reg = <0x6 0x6>;
+				};
+
+				precal_ART_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_ART_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
+			};
+
+			partition@1340000 {
+				label = "0:BOOTCONFIG";
+				reg = <0x1340000 0x0060000>;
+				read-only;
+			};
+
+			partition@13a0000 {
+				label = "0:SBL2_1";
+				reg = <0x13a0000 0x0140000>;
+				read-only;
+			};
+
+			partition@14e0000 {
+				label = "0:SBL3_1";
+				reg = <0x14e0000 0x0280000>;
+				read-only;
+			};
+
+			partition@1760000 {
+				label = "0:DDRCONFIG_1";
+				reg = <0x1760000 0x0120000>;
+				read-only;
+			};
+
+			partition@1880000 {
+				label = "0:SSD_1";
+				reg = <0x1880000 0x0120000>;
+				read-only;
+			};
+
+			partition@19a0000 {
+				label = "0:TZ_1";
+				reg = <0x19a0000 0x0280000>;
+				read-only;
+			};
+
+			partition@1c20000 {
+				label = "0:RPM_1";
+				reg = <0x1c20000 0x0280000>;
+				read-only;
+			};
+
+			partition@1ea0000 {
+				label = "0:BOOTCONFIG1";
+				reg = <0x1ea0000 0x0060000>;
+				read-only;
+			};
+
+			partition@1f00000 {
+				label = "0:APPSBL_1";
+				reg = <0x1f00000 0x0500000>;
+				read-only;
+			};
+
+			partition@2400000 {
+				label = "ubi";
+				reg = <0x2400000 0x1a000000>;
+			};
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0x0>;
+		qca,ar8327-initvals = <
+			0x00004 0x7600000   /* PAD0_MODE */
+			0x00008 0x1000000   /* PAD5_MODE */
+			0x0000c 0x80        /* PAD6_MODE */
+			0x000e4 0xaa545     /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x4e        /* PORT0_STATUS */
+			0x00094 0x4e        /* PORT6_STATUS */
+			0x00050 0xcf02cf02  /* LED_CTRL_0 */
+			0x00054 0xc832c832  /* LED_CTRL_1 */
+			>;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	qcom,id = <0>;
+
+	nvmem-cells = <&macaddr_ART_0>;
+	nvmem-cell-names = "mac-address";
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <1>;
+
+	nvmem-cells = <&macaddr_ART_6>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+	reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&pcie0_pins>;
+	pinctrl-names = "default";
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi0: wifi@1,0 {
+			compatible = "pci168c,0046";
+			reg = <0x00010000 0 0 0 0>;
+
+			nvmem-cells = <&precal_ART_1000>;
+			nvmem-cell-names = "pre-calibration";
+		};
+	};
+};
+
+&pcie1 {
+	status = "okay";
+	reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&pcie1_pins>;
+	pinctrl-names = "default";
+	max-link-speed = <1>;
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi1: wifi@1,0 {
+			compatible = "pci168c,0046";
+			reg = <0x00010000 0 0 0 0>;
+
+			nvmem-cells = <&precal_ART_5000>;
+			nvmem-cell-names = "pre-calibration";
+		};
+	};
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts

@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qcom-ipq8065.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Arris TR4400 v2";
+	compatible = "arris,tr4400-v2", "qcom,ipq8065", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	aliases {
+		led-boot = &led_status_blue;
+		led-failsafe = &led_status_red;
+		led-running = &led_status_blue;
+		led-upgrade = &led_status_red;
+	};
+
+	chosen {
+		bootargs = "rootfstype=squashfs noinitrd";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		led_status_red: status_red {
+			label = "red:status";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_status_blue: status_blue {
+			label = "blue:status";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&qcom_pinmux {
+	button_pins: button_pins {
+		mux {
+			pins = "gpio6", "gpio54";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio7", "gpio8";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	rgmii2_pins: rgmii2_pins {
+		tx {
+			pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
+			input-disable;
+		};
+	};
+
+	spi_pins: spi_pins {
+		cs {
+			pins = "gpio20";
+			drive-strength = <12>;
+		};
+	};
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_SPI>;
+	status = "okay";
+
+	spi@1a280000 {
+		status = "okay";
+
+		pinctrl-0 = <&spi_pins>;
+		pinctrl-names = "default";
+
+		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+		flash@0 {
+			compatible = "everspin,mr25h256";
+			spi-max-frequency = <40000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		compatible = "qcom,nandcs";
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "0:SBL1";
+				reg = <0x0000000 0x0040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "0:MIBIB";
+				reg = <0x0040000 0x0140000>;
+				read-only;
+			};
+			partition@180000 {
+				label = "0:SBL2";
+				reg = <0x0180000 0x0140000>;
+				read-only;
+			};
+			partition@2c0000 {
+				label = "0:SBL3";
+				reg = <0x02c0000 0x0280000>;
+				read-only;
+			};
+			partition@540000 {
+				label = "0:DDRCONFIG";
+				reg = <0x0540000 0x0120000>;
+				read-only;
+			};
+			partition@660000 {
+				label = "0:SSD";
+				reg = <0x0660000 0x0120000>;
+				read-only;
+			};
+			partition@780000 {
+				label = "0:TZ";
+				reg = <0x0780000 0x0280000>;
+				read-only;
+			};
+			partition@a00000 {
+				label = "0:RPM";
+				reg = <0x0a00000 0x0280000>;
+				read-only;
+			};
+			partition@c80000 {
+				label = "0:APPSBL";
+				reg = <0x0c80000 0x0500000>;
+				read-only;
+			};
+			partition@1180000 {
+				label = "0:APPSBLENV";
+				reg = <0x1180000 0x0080000>;
+			};
+			partition@1200000 {
+				label = "0:ART";
+				reg = <0x1200000 0x0140000>;
+				read-only;
+
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_ART_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+				precal_ART_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
+			};
+			stock_partition@1340000 {
+				label = "stock_rootfs";
+				reg = <0x1340000 0x4000000>;
+			};
+			partition@5340000 {
+				label = "0:BOOTCONFIG";
+				reg = <0x5340000 0x0060000>;
+				read-only;
+			};
+			partition@53a0000 {
+				label = "0:SBL2_1";
+				reg = <0x53a0000 0x0140000>;
+				read-only;
+			};
+			partition@54e0000 {
+				label = "0:SBL3_1";
+				reg = <0x54e0000 0x0280000>;
+				read-only;
+			};
+			partition@5760000 {
+				label = "0:DDRCONFIG_1";
+				reg = <0x5760000 0x0120000>;
+				read-only;
+			};
+			partition@5880000 {
+				label = "0:SSD_1";
+				reg = <0x5880000 0x0120000>;
+				read-only;
+			};
+			partition@59a0000 {
+				label = "0:TZ_1";
+				reg = <0x59a0000 0x0280000>;
+				read-only;
+			};
+			partition@5c20000 {
+				label = "0:RPM_1";
+				reg = <0x5c20000 0x0280000>;
+				read-only;
+			};
+			partition@5ea0000 {
+				label = "0:BOOTCONFIG1";
+				reg = <0x5ea0000 0x0060000>;
+				read-only;
+			};
+			partition@5f00000 {
+				label = "0:APPSBL_1";
+				reg = <0x5f00000 0x0500000>;
+				read-only;
+			};
+			stock_partition@6400000 {
+				label = "stock_rootfs_1";
+				reg = <0x6400000 0x4000000>;
+			};
+			stock_partition@a400000 {
+				label = "stock_fw_env";
+				reg = <0xa400000 0x0100000>;
+			};
+			stock_partition@a500000 {
+				label = "stock_config";
+				reg = <0xa500000 0x0800000>;
+			};
+			stock_partition@ad00000 {
+				label = "stock_PKI";
+				reg = <0xad00000 0x0200000>;
+			};
+			stock_partition@af00000 {
+				label = "stock_scfgmgr";
+				reg = <0xaf00000 0x0100000>;
+			};
+
+			partition@6400000 {
+				label = "fw_env";
+				reg = <0x6400000 0x0100000>;
+
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				macaddr_fw_env_0: macaddr@0 {
+					reg = <0x00 0x6>;
+				};
+				macaddr_fw_env_6: macaddr@6 {
+					reg = <0x06 0x6>;
+				};
+				macaddr_fw_env_c: macaddr@c {
+					reg = <0x0c 0x6>;
+				};
+				macaddr_fw_env_12: macaddr@12 {
+					reg = <0x12 0x6>;
+				};
+				macaddr_fw_env_18: macaddr@18 {
+					reg = <0x18 0x6>;
+				};
+			};
+			partition@6500000 {
+				label = "ubi";
+				reg = <0x6500000 0x9b00000>;
+			};
+			partition@1340000 {
+				label = "extra";
+				reg = <0x1340000 0x4000000>;
+			};
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		qca,ar8327-initvals = <
+			0x00004 0x7600000   /* PAD0_MODE */
+			0x00008 0x1000000   /* PAD5_MODE */
+			0x0000c 0x80        /* PAD6_MODE */
+			0x000e4 0xaa545     /* MAC_POWER_SEL */
+			0x000e0 0xc74164de  /* SGMII_CTRL */
+			0x0007c 0x4e        /* PORT0_STATUS */
+			0x00094 0x4e        /* PORT6_STATUS */
+			>;
+	};
+
+	phy7: ethernet-phy@7 {
+		reg = <7>;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	qcom,id = <0>;
+
+	nvmem-cells = <&macaddr_fw_env_18>;
+	nvmem-cell-names = "mac-address";
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <1>;
+
+	nvmem-cells = <&macaddr_fw_env_0>;
+	nvmem-cell-names = "mac-address";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac3 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <3>;
+	phy-handle = <&phy7>;
+
+	nvmem-cells = <&macaddr_fw_env_6>;
+	nvmem-cell-names = "mac-address";
+};
+
+&adm_dma {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+	reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&pcie0_pins>;
+	pinctrl-names = "default";
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi0: wifi@1,0 {
+			compatible = "pci168c,0046";
+			reg = <0x00010000 0 0 0 0>;
+
+			nvmem-cells = <&precal_ART_1000>, <&macaddr_fw_env_12>;
+			nvmem-cell-names = "pre-calibration", "mac-address";
+		};
+	};
+};
+
+&pcie1 {
+	status = "okay";
+	reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&pcie1_pins>;
+	pinctrl-names = "default";
+	max-link-speed = <1>;
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi1: wifi@1,0 {
+			compatible = "pci168c,0040";
+			reg = <0x00010000 0 0 0 0>;
+
+			nvmem-cells = <&precal_ART_5000>, <&macaddr_fw_env_c>;
+			nvmem-cell-names = "pre-calibration", "mac-address";
+		};
+	};
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8065-xr500.dts

@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8065-nighthawk.dtsi"
+
+/ {
+	model = "Netgear Nighthawk XR500";
+	compatible = "netgear,xr500", "qcom,ipq8065", "qcom,ipq8064";
+
+};
+
+&leds {
+	usb1 {
+		label = "white:usb1";
+		gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb2 {
+		label = "white:usb2";
+		gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&partitions {
+	partition@1880000 {
+		label = "ubi";
+		reg = <0x1880000 0xce00000>;
+	};
+
+	partition@e680000 {
+		label = "reserve";
+		reg = <0xe680000 0x0780000>;
+		read-only;
+	};
+};
+
+&wifi0 {
+	nvmem-cells = <&macaddr_art_c>, <&precal_art_1000>;
+	nvmem-cell-names = "mac-address", "pre-calibration";
+};
+
+&wifi1 {
+	nvmem-cells = <&macaddr_art_0>, <&precal_art_5000>;
+	nvmem-cell-names = "mac-address", "pre-calibration";
+};
+
+&art {
+	macaddr_art_c: macaddr@c {
+		reg = <0xc 0x6>;
+	};
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8065.dtsi

@@ -0,0 +1,167 @@
+#include "qcom-ipq8064.dtsi"
+
+/ {
+	model = "Qualcomm IPQ8065";
+	compatible = "qcom,ipq8065", "qcom,ipq8064";
+
+	aliases {
+		serial0 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+};
+
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+
+	serial@16340000 {
+		status = "okay";
+	};
+	/*
+	* The i2c device on gsbi4 should not be enabled.
+	* On ipq806x designs gsbi4 i2c is meant for exclusive
+	* RPM usage. Turning this on in kernel manifests as
+	* i2c failure for the RPM.
+	*/
+};
+
+&pcie0 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie1 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie2 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&sata {
+	ports-implemented = <0x1>;
+};
+
+&smb208_s2a {
+	regulator-min-microvolt = <775000>;
+	regulator-max-microvolt = <1275000>;
+};
+
+&smb208_s2b {
+	regulator-min-microvolt = <775000>;
+	regulator-max-microvolt = <1275000>;
+};
+
+&ss_phy_0 {
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
+};
+
+&ss_phy_1 {
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
+};
+
+&opp_table_l2 {
+	/delete-node/opp-1200000000;
+
+	opp-1400000000 {
+		opp-hz = /bits/ 64 <1400000000>;
+		opp-microvolt = <1150000>;
+		clock-latency-ns = <100000>;
+		opp-level = <2>;
+	};
+};
+
+&opp_table0 {
+	/* 
+	 * On ipq8065 1.2 ghz freq is not present
+	 * Remove it to make cpufreq work and not
+	 * complain for missing definition
+	 */
+
+	/delete-node/opp-1200000000;
+
+	/*
+	 * Voltage thresholds are <target min max>
+	 */
+	opp-384000000 {
+		opp-microvolt-speed0-pvs0-v0 = <975000 926250 1023750>;
+		opp-microvolt-speed0-pvs1-v0 = <950000 902500 997500>;
+		opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
+		opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
+		opp-microvolt-speed0-pvs4-v0 = <875000 831250 918750>;
+		opp-microvolt-speed0-pvs5-v0 = <825000 783750 866250>;
+		opp-microvolt-speed0-pvs6-v0 = <775000 736250 813750>;
+	};
+
+	opp-600000000 {
+		opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
+		opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
+		opp-microvolt-speed0-pvs2-v0 = <950000 902500 997500>;
+		opp-microvolt-speed0-pvs3-v0 = <925000 878750 971250>;
+		opp-microvolt-speed0-pvs4-v0 = <900000 855000 945000>;
+		opp-microvolt-speed0-pvs5-v0 = <850000 807500 892500>;
+		opp-microvolt-speed0-pvs6-v0 = <800000 760000 840000>;
+	};
+
+	opp-800000000 {
+		opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
+		opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
+		opp-microvolt-speed0-pvs2-v0 = <1000000 950000 1050000>;
+		opp-microvolt-speed0-pvs3-v0 = <975000 926250 1023750>;
+		opp-microvolt-speed0-pvs4-v0 = <950000 902500 997500>;
+		opp-microvolt-speed0-pvs5-v0 = <900000 855000 945000>;
+		opp-microvolt-speed0-pvs6-v0 = <850000 807500 892500>;
+	};
+
+	opp-1000000000 {
+		opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
+		opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
+		opp-microvolt-speed0-pvs2-v0 = <1050000 997500 1102500>;
+		opp-microvolt-speed0-pvs3-v0 = <1025000 973750 1076250>;
+		opp-microvolt-speed0-pvs4-v0 = <1000000 950000 1050000>;
+		opp-microvolt-speed0-pvs5-v0 = <950000 902500 997500>;
+		opp-microvolt-speed0-pvs6-v0 = <900000 855000 945000>;
+	};
+
+	opp-1400000000 {
+		opp-microvolt-speed0-pvs0-v0 = <1175000 1116250 1233750>;
+		opp-microvolt-speed0-pvs1-v0 = <1150000 1092500 1207500>;
+		opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
+		opp-microvolt-speed0-pvs3-v0 = <1100000 1045000 1155000>;
+		opp-microvolt-speed0-pvs4-v0 = <1075000 1021250 1128750>;
+		opp-microvolt-speed0-pvs5-v0 = <1025000 973750 1076250>;
+		opp-microvolt-speed0-pvs6-v0 = <975000 926250 1023750>;
+		opp-level = <1>;
+	};
+
+	opp-1725000000 {
+		opp-hz = /bits/ 64 <1725000000>;
+		opp-microvolt-speed0-pvs0-v0 = <1262500 1199375 1325625>;
+		opp-microvolt-speed0-pvs1-v0 = <1225000 1163750 1286250>;
+		opp-microvolt-speed0-pvs2-v0 = <1200000 1140000 1260000>;
+		opp-microvolt-speed0-pvs3-v0 = <1175000 1116250 1233750>;
+		opp-microvolt-speed0-pvs4-v0 = <1150000 1092500 1207500>;
+		opp-microvolt-speed0-pvs5-v0 = <1100000 1045000 1155000>;
+		opp-microvolt-speed0-pvs6-v0 = <1050000 997500 1102500>;
+		opp-supported-hw = <0x1>;
+		clock-latency-ns = <100000>;
+		opp-level = <2>;
+	};
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi

@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		linux,usable-memory = <0x41500000 0x1ea00000>;
+		reg = <0x40000000 0x20000000>;
+	};
+
+	cpus {
+		idle-states {
+			CPU_SPC: spc {
+				status = "disabled";
+			};
+		};
+	};
+
+	chosen {
+		bootargs-append = " console=ttyMSM0,115200n8 ubi.mtd=ubi ubi.mtd=art";
+	};
+};
+
+&qcom_pinmux {
+	mdio0_pins_active: mdio0_pins_active {
+		mux {
+			pins = "gpio0", "gpio1";
+			function = "mdio";
+			drive-strength = <2>;
+			bias-pull-down;
+			output-low;
+		};
+
+		clk {
+			pins = "gpio1";
+			input-disable;
+		};
+	};
+
+	phy_active: phy_active {
+		phy {
+			pins = "gpio6", "gpio7";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+			output-high;
+		};
+	};
+
+	uart1_pins: uart1_pins {
+		mux {
+			pins = "gpio51", "gpio52";
+			function = "gsbi1";
+			drive-strength = <4>;
+			bias-disable;
+		};
+	};
+};
+
+&gsbi1 {
+	status = "okay";
+	qcom,mode = <GSBI_PROT_UART_W_FC>;
+
+	serial@12450000 {
+		status = "okay";
+
+		pinctrl-0 = <&uart1_pins>;
+		pinctrl-names = "default";
+	};
+};
+
+&pcie0 {
+	status = "okay";
+
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	/delete-property/ perst-gpios;
+
+	bridge@0,0 {
+		reg = <0x0 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi0: wifi@1,0 {
+			compatible = "qcom,ath10k";
+			status = "okay";
+			reg = <0x10000 0 0 0 0>;
+		};
+	};
+};
+
+&pcie1 {
+	status = "okay";
+
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	/delete-property/ perst-gpios;
+
+	bridge@0,0 {
+		reg = <0x0 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi1: wifi@1,0 {
+			compatible = "qcom,ath10k";
+			status = "okay";
+			reg = <0x10000 0 0 0 0>;
+		};
+	};
+};
+
+&pcie2 {
+	status = "okay";
+
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	/delete-property/ perst-gpios;
+
+	bridge@0,0 {
+		reg = <0x0 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi2: wifi@1,0 {
+			compatible = "qcom,ath10k";
+			status = "okay";
+			reg = <0x10000 0 0 0 0>;
+		};
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		compatible = "qcom,nandcs";
+
+		reg = <0>;
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		nand-is-boot-medium;
+		qcom,boot_pages_size = <0x2140000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "sbl1";
+				reg = <0x0 0x40000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "mibib";
+				reg = <0x40000 0x140000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "sbl2";
+				reg = <0x180000 0x140000>;
+				read-only;
+			};
+
+			partition@2c0000 {
+				label = "sbl3";
+				reg = <0x2c0000 0x280000>;
+				read-only;
+			};
+
+			partition@540000 {
+				label = "ddrconfig";
+				reg = <0x540000 0x120000>;
+				read-only;
+			};
+
+			partition@660000 {
+				label = "ssd";
+				reg = <0x660000 0x120000>;
+				read-only;
+			};
+
+			partition@780000 {
+				label = "tz";
+				reg = <0x780000 0x280000>;
+				read-only;
+			};
+
+			partition@a00000 {
+				label = "rpm";
+				reg = <0xa00000 0x280000>;
+				read-only;
+			};
+
+			partition@1fc0000 {
+				label = "u-boot";
+				reg = <0x1fc0000 0x180000>;
+				read-only;
+			};
+
+			partition@21c0000 {
+				label = "bootkernel1";
+				reg = <0x21c0000 0xa80000>;
+			};
+
+			partition@2c40000 {
+				label = "bootkernel2";
+				reg = <0x2c40000 0xa80000>;
+			};
+
+			partition@36c0000 {
+				label = "ubi";
+				reg = <0x36c0000 0x46c0000>;
+			};
+
+			partition@7d80000 {
+				label = "art";
+				reg = <0x7d80000 0x200000>;
+				read-only;
+			};
+		};
+	};
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts

@@ -0,0 +1,332 @@
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "Edgecore ECW5410";
+	compatible = "edgecore,ecw5410", "qcom,ipq8064";
+
+	reserved-memory {
+		nss@40000000 {
+			reg = <0x40000000 0x1000000>;
+			no-map;
+		};
+
+		smem: smem@41000000 {
+			reg = <0x41000000 0x200000>;
+			no-map;
+		};
+
+		wifi_dump@44000000 {
+			reg = <0x44000000 0x600000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		idle-states {
+			CPU_SPC: spc {
+				status = "disabled";
+			};
+		};
+	};
+
+	aliases {
+		serial1 = &gsbi1_serial;
+		ethernet0 = &gmac2;
+		ethernet1 = &gmac3;
+
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_red;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+	};
+
+	chosen {
+		bootargs-append = " console=ttyMSM0,115200n8 root=/dev/ubiblock0_1";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		led_power_green: power_green {
+			label = "green:power";
+			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2g_green {
+			label = "green:wlan2g";
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan2g_yellow {
+			label = "yellow:wlan2g";
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan5g_green {
+			label = "green:wlan5g";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power_red: power_red {
+			label = "red:power";
+			gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan5g_yellow {
+			label = "yellow:wlan5g";
+			gpios = <&qcom_pinmux 59 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+
+&qcom_pinmux {
+	spi_pins: spi_pins {
+		mux {
+			pins = "gpio18", "gpio19";
+			function = "gsbi5";
+			drive-strength = <10>;
+			bias-pull-down;
+		};
+
+		clk {
+			pins = "gpio21";
+			function = "gsbi5";
+			drive-strength = <12>;
+			bias-pull-down;
+		};
+
+		cs {
+			pins = "gpio20";
+			function = "gpio";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio16", "gpio23", "gpio24", "gpio26",
+				   "gpio28", "gpio59";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	button_pins: button_pins {
+		mux {
+			pins = "gpio25";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	uart1_pins: uart1_pins {
+		mux {
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-none;
+		};
+	};
+};
+
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_UART_W_FC>;
+	status = "okay";
+
+	serial@12450000 {
+		status = "okay";
+
+		pinctrl-0 = <&uart1_pins>;
+		pinctrl-names = "default";
+	};
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_SPI>;
+	status = "okay";
+
+	spi4: spi@1a280000 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+
+		pinctrl-0 = <&spi_pins>;
+		pinctrl-names = "default";
+
+		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+		m25p80@0 {
+			compatible = "jedec,spi-nor";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			spi-max-frequency = <50000000>;
+			reg = <0>;
+
+			partitions {
+				compatible = "qcom,smem-part";
+			};
+		};
+	};
+};
+
+&hs_phy_0 {		/* USB3 port 0 HS phy */
+	status = "okay";
+};
+
+&hs_phy_1 {		/* USB3 port 1 HS phy */
+	status = "okay";
+};
+
+&ss_phy_0 {		/* USB3 port 0 SS phy */
+	status = "okay";
+};
+
+&ss_phy_1 {		/* USB3 port 1 SS phy */
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	/delete-property/ perst-gpios;
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			compatible = "qcom,ath10k";
+			status = "okay";
+			reg = <0x00010000 0 0 0 0>;
+			qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L";
+		};
+	};
+};
+
+&pcie2 {
+	status = "okay";
+
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	/delete-property/ perst-gpios;
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			compatible = "qcom,ath10k";
+			status = "okay";
+			reg = <0x00010000 0 0 0 0>;
+			qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L";
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		compatible = "qcom,nandcs";
+
+		reg = <0>;
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			rootfs1@0 {
+				label = "rootfs1";
+				reg = <0x0000000 0x4000000>;
+			};
+
+			rootfs2@4000000 {
+				label = "rootfs2";
+				reg = <0x4000000 0x4000000>;
+			};
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+
+	qcom,id = <2>;
+	mdiobus = <&mdio0>;
+
+	phy-mode = "sgmii";
+	phy-handle = <&phy1>;
+};
+
+&gmac3 {
+	status = "okay";
+
+	qcom,id = <3>;
+	mdiobus = <&mdio0>;
+
+	phy-mode = "sgmii";
+	phy-handle = <&phy0>;
+};
+
+&adm_dma {
+	status = "okay";
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8068-mr42.dts

@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+
+#include "qcom-ipq8068-cryptid-common.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Meraki MR42";
+	compatible = "meraki,mr42", "qcom,ipq8064";
+
+	aliases {
+		serial1 = &gsbi1_serial;
+		ethernet0 = &gmac3;
+
+		led-boot = &led_active;
+		led-failsafe = &led_power;
+		led-running = &led_active;
+		led-upgrade = &led_active;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		led_power: power {
+			label = "orange:power";
+			gpios = <&qcom_pinmux 31 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_active: active {
+			label = "white:active";
+			gpios = <&qcom_pinmux 32 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gmac3 {
+	status = "okay";
+
+	qcom,id = <3>;
+	mdiobus = <&mdio0>;
+
+	phy-mode = "sgmii";
+	phy-handle = <&phy2>;
+
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gsbi2 {
+	status = "okay";
+	qcom,mode = <GSBI_PROT_I2C>;
+};
+
+&gsbi2_i2c {
+	status = "okay";
+
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	ina2xx@40 {
+		compatible = "ina219";
+		shunt-resistor = <40000>;
+		reg = <0x40>;
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x56>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mac_address: mac-address@66 {
+			reg = <0x66 0x6>;
+		};
+	};
+};
+
+&gsbi6 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi6_i2c {
+	status = "okay";
+
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	tlc591xx@40 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "ti,tlc59108";
+		reg = <0x40>;
+
+		red@0 {
+			label = "red:user";
+			reg = <0x0>;
+		};
+
+		green@1 {
+			label = "green:user";
+			reg = <0x1>;
+		};
+
+		blue@2 {
+			label = "blue:user";
+			reg = <0x2>;
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins_active>, <&phy_active>;
+	pinctrl-names = "default";
+
+	phy2: ethernet-phy2 {
+		reg = <2>;
+
+		reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <24000>;
+
+		eee-broken-100tx;
+		eee-broken-1000t;
+	};
+};
+
+&qcom_pinmux {
+	i2c0_pins: i2c0_pins {
+		mux {
+			pins = "gpio24", "gpio25";
+			function = "gsbi2";
+			drive-strength = <2>;
+			bias-pull-up;
+			input;
+		};
+	};
+
+	button_pins: button_pins {
+		mux {
+			pins = "gpio26";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	i2c1_pins: i2c1_pins {
+		mux {
+			pins = "gpio29", "gpio30";
+			function = "gsbi6";
+			drive-strength = <2>;
+			bias-pull-up;
+			input;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio31", "gpio32";
+			function = "gpio";
+			drive-strength = <12>;
+			bias-pull-down;
+			output-low;
+		};
+	};
+};
+
+&wifi0 {
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <1>;
+};
+
+&wifi1 {
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <2>;
+};
+
+&wifi2 {
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <3>;
+};

target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8068-mr52.dts

@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+
+#include "qcom-ipq8068-cryptid-common.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Meraki MR52";
+	compatible = "meraki,mr52", "qcom,ipq8064";
+
+	aliases {
+		serial1 = &gsbi1_serial;
+		mdio-gpio0 = &mdio_gpio0;
+		ethernet0 = &gmac2;
+		ethernet1 = &gmac3;
+
+		led-boot = &led_active;
+		led-failsafe = &led_power;
+		led-running = &led_active;
+		led-upgrade = &led_active;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		led_power: power {
+			label = "orange:power";
+			gpios = <&qcom_pinmux 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan2_green {
+			label = "green:lan2";
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan1_green {
+			label = "green:lan1";
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_active: active {
+			label = "white:active";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+		};
+
+		lan2_orange {
+			label = "orange:lan2";
+			gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan1_orange {
+			label = "orange:lan1";
+			gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gmac2 {
+	status = "okay";
+
+	qcom,id = <2>;
+	mdiobus = <&mdio0>;
+
+	phy-mode = "sgmii";
+	phy-handle = <&phy0>;
+
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac3 {
+	status = "okay";
+
+	qcom,id = <3>;
+	mdiobus = <&mdio_gpio0>;
+
+	phy-mode = "sgmii";
+	phy-handle = <&phy4>;
+
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <1>;
+};
+
+&gsbi7 {
+	status = "okay";
+	qcom,mode = <GSBI_PROT_I2C>;
+};
+
+&gsbi7_i2c {
+	status = "okay";
+
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+
+	ina2xx@45 {
+		compatible = "ina219";
+		shunt-resistor = <80000>;
+		reg = <0x45>;
+	};
+
+	tlc591xx@49 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "ti,tlc59108";
+		reg = <0x49>;
+
+		red@0 {
+			label = "red:user";
+			reg = <0x0>;
+		};
+
+		green@1 {
+			label = "green:user";
+			reg = <0x1>;
+		};
+
+		blue@2 {
+			label = "blue:user";
+			reg = <0x2>;
+		};
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x52>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mac_address: mac-address@66 {
+			reg = <0x66 0x6>;
+		};
+	};
+};
+
+&qcom_pinmux {
+	i2c_pins: i2c_pins {
+		mux {
+			pins = "gpio8", "gpio9";
+			function = "gsbi7";
+			drive-strength = <2>;
+			bias-pull-up;
+			input;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio19", "gpio26";
+			function = "gpio";
+			drive-strength = <12>;
+			bias-pull-down;
+			output-low;
+		};
+	};
+
+	button_pins: button_pins {
+		mux {
+			pins = "gpio25";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+			input;
+		};
+	};
+};
+
+&soc {
+	mdio_gpio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "okay";
+
+		pinctrl-0 = <&mdio0_pins_active>, <&phy_active>;
+		pinctrl-names = "default";
+
+		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH
+			 &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+
+		phy0: ethernet-phy0 {
+			reg = <0>;
+			reset-gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <24000>;
+		};
+
+		phy4: ethernet-phy4 {
+			reg = <4>;
+			reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <24000>;
+		};
+	};
+};
+
+&wifi0 {
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <4>;
+};
+
+&wifi1 {
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <3>;
+};
+
+&wifi2 {
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <2>;
+};